SPEC NO: DSAB0117 REV NO: V.2 DATE: APR/17/2002 PAGE: 1 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
SURFACE MOUNT DISPLAY
APSC03-41YWW YELLOW
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!0.3 INCH DIGIT HEIGHT.
!LOW CURRENT OPERATION.
!EXCELLENT CHARACTER APPEARANCE.
!I.C. COMPATIBLE.
!MECHANICALL Y RUGGED.
!WHITE F ACE,WHITE SEGMENT.
!PACKAGE:1100PCS/REEL.
Package Dimensions& Internal Circuit Diagram
Description
The Yellow source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide
Yellow Light Emitting Diode.
SPEC NO: DSAB0117 REV NO: V.2 DATE: APR/17/2002 PAGE: 2 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Electrical / Optical Characteristics at TA=25°°
°°
°C
Absolute Maximum Ratings at TA=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePwolleY095mnAm02=FI
λDhtgnelevaWetanimoDwolleY885mnAm02=FI
λ∆ 2/1 htdiw-flaHeniLlartcepSwolleY53mnAm02=FI
CecnaticapaCwolleY02FpzHM1=f;V0=FV
V
F
egatloVdrawroFwolleY1.25.2V Am02=FI
I
R
tnerruCesreveRwolleY01AuV5=RV
retemaraPretemaraP retemaraP retemaraPretemaraP wolleYwolleY wolleY wolleYwolleYstinUstinU stinU stinUstinU
noitapissidrewoP 501Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 041Am
egatloVesreveR 5V
erutarepmeTegarotS/gnitarepO 04- °58+oTC °C
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL )dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI Am01@ noitpircseDnoitpircseD noitpircseD noitpircseDnoitpircseD
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT
WWY14-30CSPA)PaG/PsAaG(WOLLEYDESUFFIDETIHW8.092.2 dnaH.tR,edohtaCnommoC lamiceD
SPEC NO: DSAB0117 REV NO: V.2 DATE: APR/17/2002 PAGE: 3 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Yellow APSC03-41YWW
SPEC NO: DSAB0117 REV NO: V.2 DATE: APR/17/2002 PAGE: 4 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Recommended Soldering Pattern
(Units : mm)
APSC03-41YWW
SMT Reflow Soldering Instruction
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
SPEC NO: DSAB0117 REV NO: V.2 DATE: APR/17/2002 PAGE: 5 OF 5
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:Y.G
Tape Specification
(Units : mm)
