www.mill-max.com DATA SHEET PRODUCT NUMBER: 342-10-110-00-591000 DESCRIPTION Interconnect Machined Pin Header Board Stacking Pin Header .018" (0,457mm) Pin Head Rows: Single Row (1) Pitch: .100" (2,540mm) Clip Grid: 00 Pin Window Pattern 591 Plating Code: 10 Shell: 10 " Gold over 100 " Nickel Insulator Pin Clip Type: 000 Mounting Type: Through Hole Solder Mount Insulator Information: PCT High Temperature # Pins ROHS Compliant 10 LOOSE PIN/RECEPTACLE USED: 4259 (Brass Alloy) BRASS ALLOY 360 per ASTM B 16, or 385 per ASTM B455 Properties of BRASS ALLOY 360 ASTM B 16: Chemical composition: Cu 63% (max), Pb 3.7% (max), Fe .35% (max), Zn remainder Temper as machined: H02/H04 Yield Strength: 25-45 ksi Tensile strength: 57-80 ksi Hardness as machined: 80-90 Rockwell B Electrical conductivity: 26% IACS* Melting point: 1000C/840C (liquidus/solidus) Properties of BRASS ALLOY 385 ASTM B 455: Chemical composition: Cu 60% (max), Pb 3.5% (max), Fe .35% (max), Zn remainder Temper as machined: H02/H04 Yield Strength: 16 ksi(min) Tensile strength: 48 ksi(min) Hardness as machined: 80-90 Rockwell B Electrical conductivity: 28% IACS* Melting point: 1000C/840C (liquidus/solidus) After machining, brass parts are often annealed (softened) for subsequent bending, swaging or crimping. A partial anneal down to 6010 RB is recommended for 90 bends, a full anneal down to 3515 RB is recommended for pins or terminals that are swaged (riveted) to a circuit Product Number 342-10-110-00-591000 Data Sheet mill-max.com Updated 1/15/21 8:15 PM EST - Page 1 of 2 board or crimped to a wire. Note: Plated Brass parts need a barrier plate to prevent zinc diffusion, 50" min. nickel or 100" min. copper is recommended by ASTM B 545 and 579. ASTM B 488 also recommends a 50" min. nickel barrier plate beneath gold to prevent copper diffusion inherent with all copper alloy products. RoHS-2 directive 2011/65/EU, exemption 6c allows up to 4% lead as an alloy agent in copper. *International Annealed Copper Standard, i.e. as a % of pure copper. INSULATOR MATERIAL: PCT Polyester (Injection Molded) Properties: Polyester {30% glass filled}, High Temp., (black). Flammability rating UL 94 V-O Rated voltage: 100 VRMS/150 VDC Insulation resistance: 10,000 Megaohms min. Material Heat Deflection Temp (per ASTM D 648): 529F (276C) @ 66 psi Dielectric strength: 1000 VRMS min. (700 VRMS min. for series 117 Shrink DIP) Note: Materials with HDT above 446F (230C) are considered suitable for "eutectic" reflow soldering. For "lead-free" reflow soldering, choose materials with an HDT above 500F (260C). PCT is the standard plastic used with RoHS "lead-free" plated pins. STANDARD TOLERANCES ON PCB TERMINAL PINS & RECEPTACLES Diameters +/-.002" Lengths +/-.005" Angles +/- 2 STANDARD TOLERANCES ON SPRING-LOADED PINS Diameters +/-.002" Lengths +/-.006" Angles +/- 2 ADDITIONAL NOTES & SPECIFICATIONS In the interest of improved design, quality and performance , Mill-Max reserves the right to make changes in its specifications without prior notice. Specifications and tolerances are provided wherever possible. The tolerance on dimensions of critical to function features is typically held tighter than the stated standard tolerances, such as press-fits, holes and lengths affecting the coplanarity of SMT products. Due to the wide variety of interconnects Mill-Max offers, the specific tolerances vary from product to product. If you need information regarding the tolerance of a particular part, please contact Technical Services. (c) 2021 Mill-Max Mfg. Corp. 190 Pine Hollow Rd , Oyster Bay, NY 11771, USA Phone: 516.922.6000 Product Number 342-10-110-00-591000 Data Sheet mill-max.com Updated 1/15/21 8:15 PM EST - Page 2 of 2