Universal Input Power Supply AC to DC or DC to DC ADTECH Analog-Digital Technology, Inc. The Adtech Model IPS 2416 universal input power supply provides an ideal solution for powering Two-wire and Three-wire instruments. Model No. IPS 2416 The IPS 2416 accepts 104 VAC to 253 VAC or 100 VDC to 350 VDC input and provides an isolated output of 24 VDC at 350 mA DC. It can power up to (16) sixteen 4-20 mA two-wire loops such as Adtech's 100 or 200 Series transmitters or up to (12) twelve three-wire 300 Series transmitters . When used to power Adtech's Low Power 300L Series up to 100 units may be powered. The output is diode coupled facilitating auctioneering with other 24 VDC power supplies. The output is also over voltage and short circuit protected which provides power supply security and high loop integrity. Typical Applications *Power Two - Wire Transmitters The IPS 2416 provides 1500 VAC or 2100 VDC Hipot isolation. *Power Three - Wire Transmitters An LED provides indication that the 24 VDC output is present. *Provide Isolated DC Power DIN mounting is supplied as standard. Surface mount (Option H 28) is available at no extra cost, specify. *Provides excitation power for sensors )+( AC-Line DC (+) AC-Neutral DC (-) GND Filter Network Switching Regulator & Current Limit Isol. Transformer Filter Network )-( NOTE: Ground terminal must be connected to earth ground. Features * Universal AC or DC input * 104 to 253 VAC, or 100 to 350 VDC * 47-440 Hz input * 24vdc output, diode coupled for ease of auctioneering * Output short-circuit and over-voltage protected * Input-output isolation 1500 VAC or 2100 VDC Hipot. Connections/Dimensions 1.56 "G" RAIL MOUNTING DIN EN 50 035 (32mm, 15mm) "T" RAIL MOUNTING DIN EN 50 022 (35mm, 7.5mm) DIN EN 50 022 (35mm, 15mm) } } } - + - + - + CL CL ADTECH - + OUT 1 - + 1.56 - 0-3 + 1.56 OUT 2 ON CAUTION HIGH VOLTAGE INSIDE DO NOT OPEN WHEN POWER IS ON 24 VDC 350 MA MAX. WIRE INSERTION SCREW CLAMP FROM TOP UP TO 14 AWG. 3.11 ADTECH IPS 2416 POWER SUPPLY OUT 4 + } - - + AC/DC 3.65 G N(-) L(+) 3.55 3.36 - + INPUT AC or DC NOTE: The Ground terminal MUST be connected to earth ground. "T RAIL MOUNTING DIN EN 50 022 (35mm, 7.5mm) ALL output (+) and (-) terminals are internally connected. SLOT FOR "T" RAIL RELEASE "G" RAIL MOUNTING DIN EN 50 035 (32mm, 15mm) "T" RAIL MOUNTING DIN EN 50 022 (35mm, 15mm) Input/Output Performance Input Power: 104 to 253 VAC 47 to 440 Hz or 100 to 350 VDC Output Voltage: 24VDC 5% @ 320mA max. Output Regulation: 1.2 mV/volt line regulation 2.4 mV/ohm (75-750 ohm) load regulation. Output Current Limit: 350mA DC max. Output Auctioneering: Diode coupled output Output Overload: Indefinite short circuit 350 mA max. Output Ripple: 150 mV p-p max. Isolation: Input/output/housing: 1500 vac, 2100 vdc Hipot. Temperature Range: Operating: -31C to 70C (-24F to 158F) Storage: -40C to 85C (-40F to 185F) Power Mechanical Options Ordering Information * Model number * Housing and miscellaneous options Please refer to the Housing and/or Option Section for more specific and detailed information. See Input (no separate power) Electrical Classification: General purpose Connection: Screw compression type accepts up to 14 AWG Option Number H 15D5 H 27 H 28 H 29 H 30 Mounting: DIN Surface: (H 28) Optional Nema 4 or 7 Weight: Net unit: 9.0 oz (257 grams) Shipping: 16.0 oz (455 grams) Description Explosion Proof: Class 1, Group B,C & D NEMA 4 Enclosure Single Instrument Surface Mounting T 35 DIN "T" rail two feet long T 32 DIN "G" rail two feet long Analog-Digital Technology, Inc. 3750 Monroe Avenue Pittsford, New York 14534-1302 Phone: (716) 383-8280 Fax: (716) 383-8386 Represented by: ADTECH E Mail: adtech@adtech-inst.com Web site: http://www.adtech-inst.com Information subject to change without notice. Printed in U.S.A. #A0126