Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 1 of 8
OX-220
Oven Controlled Crystal Oscillator
• Reow Process Compatible
• Surface Mount package
• SC_CUT Crystal
• Low Prole Compact Package (8.3mm)
• Standard Frequencies: 10; 12.8; 19.2; 20; 26; 30.72 Mhz
• Base stations
• Test equipment
• Synthesizers
• Military communication equipment
• Digital Switching
Features Applications
OX-220
Frequency Stabilities1 (SC-Cut Crystal-Option - 10 to 40 MHz)
Parameter Min Typical Max Units Condition
vs. operating temperature range
(referenced to +25°C)
-10
-10
+10
+10
ppb
ppb
-20 to +70°C
-40 to +85°C
Initial tolerance
vs. supply voltage change
vs. load change
vs. aging / day
vs. aging / day
vs. aging / year
vs. aging / year
-0.2
-5
-5
-0.5
-1
-60
-100
+0.2
+5
+5
+0.5
+1
+60
+100
ppm
ppb
ppb
ppb
ppb
ppb
ppb
at time of shipment, nominal EFC
VS ±5% static
Load ±5% static
≤10 Mhz after 30 days of operation
> 10 Mhz after 30 days of operation
≤ 10 Mhz after 30 days of operation
> 10 Mhz after 30 days of operation
Holdover
start up time
Warm-up time 5 minutes to ±100ppb of nal frequency (1 hour
reading) @ +25°C
Performance Specications
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 2 of 8
Performance Specications
Supply Voltage (Vs)
Parameter Min Typical Max Units Condition
Supply voltage (standard) 3.135 3.3 3.465 VDC
4.75 5.0 5.25 VDC
Power consumption 3.1 Watts during warm-up
1.5 Watts steady state @ +25°C
RF Output
Signal [standard] HCMOS
Load 15 pF
Signal Level (Vol) 0.4 VDC with Vs=3.3V and 15pF Load
Signal Level (Vol) 0.5 with Vs=5.0V & 12V and 15pF Load
Signal Level (Voh) 2.4 VDC with Vs=3.3V and 15pF Load
Signal Level (Voh) 3.5 with Vs=5.0V & 12V and 15pF Load
Duty Cycle 45 55 % @ (Voh-Vol)/2
Rise time 5 ns
Fall time 5 ns
Signal Sine Wave
Load 50 Ω
Output Power @3,3V 2 5 8 dBm 50 Ω load
Output Power @ 5.0V 5 8 11 dBm 50 Ω load
Harmonics -30 dBm 50 Ω load
Frequency Tuning (EFC)
Tuning Range Fixed OCXO; No adjust
Opti-
on5
±0.8 ±2.4 ppm with SC cut crystal
Linearity 10%
Tuning Slope Positive
Control Voltage Range 0.0 1.4 2.8 VDC with Vs=3.3V
0.0 2.0 4.0 VDC with Vs=5.0V
modulation
Reference Voltage Output (Vref)
Reference Voltage 2.75 2.8 2.85 VDC with Vs = 3.3 VDC
3.92 4.0 4.08 VDC with Vs = 5.0 VDC
Additional Parameters
Phase Noise3
-80
-110
-138
-148
-152
-70
-105
-130
-140
-145
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
@
30.72MHz
with SC
Cut
Phase Noise3
-90
-120
-140
-148
-152
-80
-110
-135
-145
-145
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
@ 20MHz
with SC
Cut
Weight 10 g
Processing & Packing Handling & Processing Note
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 3 of 8
OX-220
Height “H” cover material
12.1 plastic
8.5 plastic
Pin Connections
1 Electronic Frequency Control Input (EFC)
2Reference Voltage output
3 Supply Voltage Input (Vs)
4 RF Output
5 Oven Alarm
6 N.C or Option (must remain un connected)
7 Ground (Case)
Dimensions in mm
Outline Drawing / Enclosure
Absolute Maximum Ratings
supply voltage (Vs) 5.5 V with Vs=3.3 & 5.0 VDC
Output Load 50 pF
Operable Temperature Range -45 +85 °C
Storage Temperature Range -45 +85 °C
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 4 of 8
Standard Shipping Method (OX-220 / OX -221)
Enclosure Type Tape Width W (mm) Quantity per meter Quantity per reel Dimension P
OX-2201 (12.1mm) 44 37.5 175 28
OX-2206 (8.5mm) 44 37.5 250 28
Note: All temperatures refer to topside of the package, measured on the package body surface.
Maßangaben in mm: Dimension in mm:
A, B und K Maße von Bauelement abhängig A, B und K are dependent uppon component dimensions
Fertigungstoleranzen entsprechen der DIN IEC 286-3 production tolerance complying DIN IEC 286-3
P
W
1.75±0.1
R 0.75
4.0
Lage im Gurt
Position in tape
Pin1
A
BB
Abwickelrichtung
Unwinding direction
0.20
±0.05
A
All dimensions in millimeters unless otherwise stated
XXXXX
XXXXX
Bei W < 32mm nur obere Lochreihe vorhanden
if W < 32mm only upper hole line existent
A
Schnitt B - B
B
K
Schnitt A - A
Parameter Description
Rapid temperature
changes
MIL-883-1010 Cond B 1000 cycles -55/125C
Vibration MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min
Shock Mech.Shock MIL-STD-202 Meth 213 Cond.C 100G 6ms 6 shocks in each direction
Solderability J_STD_002C Cond A, Through hole device/ Cond. B, SMD 255C (diving time
50,5sec.) Dip+Look with 8h damp pre-treatment: solder wetting >95%
Solvent resistance MIL-STD-883 Meth 2015 Solv. 1,3,4
ESD HBM JESD22-A114-F Class 1C 10* 1000V
Moisture Sensit. Level 1 JESD22-A113-B
RoHS compliance 100% RoHS 6 compliant
Washable non-washable device
Recommended Reow Prole
IPC/JEDEC J-STD-020 (latest revision)
Additional Information:
This SMD oscillator has been designed for pick and place reow soldering.
SMD oscillators must be on the top side of the PCB during the reow process.
Additional Environmental Conditions
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 5 of 8
typical warm up
@ OX-2201-EAE-1080-20M00
typical Phase Noise
@ OX-2201-EAE-1080-20M00
typical temp stability
@ OX-2201-EAE-1080-20M00
typical ADEV
@ OX-2201-EAE-1080-20M00
typical performance data
-80
-60
-40
-20
0
20
40
60
80
0200 400 600 800 1000 1200
Time [sec]
Frequency deviation [ppb]
-10
-8
-6
-4
-2
0
2
4
6
8
10
-60 -40 -20 020 40 60 80 100
Temperature [°C]
Frequency deviation [ppb]
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 6 of 8
typical aging data
@ OX-2201-EAE-1080-20M00
typical frequency vs. load change
@ OX-2201-EAE-1080-20M00
typical frequeny vs. supply voltage
@ OX-2201-EAE-1080-20M00
typical retrace
@ OX-2201-EAE-1080-20M00
typical performance data
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 7 of 8
typical case temperature vs outside temperature
@ OX-2201-EAE-1080-20M00
typical power consumption vs operating temperauture
@ OX-2201-EAE-1080-20M00
typical performance data
recomended power on time after x days of power o
@ OX-2201-EAE-1080-20M00
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page 8 of 8
Ordering Information
OX - 220 1 - D A E - 108 0 - 10M0000000
Product Family
OX: OCXO Package
SMD version: 220
Height
1: 12.1 mm
6: 8.5 mm
Supply Voltage
D: 5V
E: 3.3V
Stability Code
108: ±10ppb
Frequency
Frequency Control
0: No Tuning
1: ±0.8 to ±2.4ppm
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 16.01.2015
For Additional Information, Please Contact
RF Output Code
A: HCMOS
E: Sinewave
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modication.
5. Contact factory for availability.
USA:
Vectron International
267 Lowell Road
Suite 102
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268.801.100
Fax: +49 (0) 7268.801.282
Asia:
Vectron International
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: +86 21 6194 6699