HT-MM900A Military Temperature Oscillator Applications Features * Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places * Military Applica!ons * Low power consump!on of 4.5 mA typical * Environmentally Demanding Applica!ons * CMOS compa!ble output * Ruggedized Equipment * Industry-standard packages: 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm * Opera!ng temperature to 125C * Capable of surviving 50,000 g shock, with 70 g vibra!on resistance and 0.1ppb/g g-sensi!vity Performance Specifica"ons Parameter and Condi!ons Output Frequency Range Frequency Stability Symbol f F_stab Aging Opera!ng Temperature Range Ag T_use Supply Voltage Vdd Min. 1 -20 Typ. - - Max. 110 +20 Unit MHz ppm -50 -1.5 -55 -40 -40 -40 1.62 - - - - - - 1.8 +50 1.5 +125 +125 +105 +85 1.98 ppm ppm C C C C V 2.5 2.8 3.0 3.3 3.9 3.6 2.5 2.5 1 - 1.2 1.5 1.5 - 2.75 3.08 3.3 3.63 5 4.5 10 10 5 55 2.5 3.5 3 - V V V V mA mA A A A % ns ns ns Vdd Standby Current I_std Duty Cycle Rise/Fall Time DC Tr, Tf Output High Voltage VOH 2.25 2.52 2.7 2.97 - - - - - 45 - - 90% Output Low Voltage VOL - - 10% Vdd Input High Voltage Input Low Voltage Input Pull-up Impedence VIH VIL Z_in 70% - - 2 - - - 100 - - - - - - - 2 2 1.5 2.5 - 30% 250 - 5 150 5 4 4.5 3 3 Vdd Vdd k M ms ns ms ps ps ps ps Current Consump!on Startup Time Enable/Disable Time Resume Time RMS Period Ji"er RMS Phase Ji"er (random) Idd T_start T_oe T_resume T_ji" T_phj Page 1 of 6 Condi!on Inclusive of Ini!al tolerance at 25C, and varia!ons over opera!ng temperature, rated power supply voltage and load. 1st year at 25C Other supply voltages between 2.5V and 3.3V can be supported. Contact Vectron for addi!onal informa!on. No load condi!on, f = 20 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V No load condi!on, f = 20 MHz, Vdd = 1.8V ST = GND, Vdd = 3.0V or 3.3V, Output is Weakly Pulled Down ST = GND, Vdd = 2.5V or 2.8V, Output is Weakly Pulled Down ST = GND, Vdd = 1.8V, Output is Weakly Pulled Down All supply voltage op!ons 20% - 80% Vdd = 2.5V, 2.8V, 3.0V or 3.3V 20% - 80% Vdd = 1.8V 20% - 80% Vdd = 2.25V - 3.63V IOH = -4 mA (Vdd = 3.0V or 3.3V) IOH = -3 mA (Vdd = 2.8V and Vdd = 2.5V) IOH = -2 mA (Vdd = 1.8V) IOL = 4 mA (Vdd = 3.0V or 3.3V) IOL = 3 mA (Vdd = 2.8V and Vdd = 2.5V) IOL = 2 mA (Vdd = 1.8V) Pin 1, OE or ST Pin 1, OE or ST Pin 1, OE logic high or logic low, or ST logic high Pin 1, ST logic low Measured from the !me Vdd reaches its rated minimum value Measured from the !me ST pin crosses 50% threshold f = 20 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V f = 20 MHz, Vdd = 1.8V Integra!on bandwidth = 12 kHz to 20 MHz, -40 to +125C Integra!on bandwidth = 12 kHz to 20 MHz, -55 to +125C Typical Phase Noise 100MHz output, Phase Ji*er <1.2 ps rms, 12kHz - 20MHz Page 2 of 6 Packaging Op*ons Package Outline & Dimensions (Unit: mm) Recommended Land Pa!ern (Unit: mm) 2.0 x 1.6 x 0.75 mm 1.5 0.65 2.00.05 #3 #2 #2 1.2 0.8 #1 0.750.05 YXXXX #4 0.93 1.60.05 #3 0.84 #4 #1 0.68 0.9 2.5 x 2.0 x 0.75 mm 1.9 2.2 2.5 0.05 1.00 #3 1.1 #2 #2 1.0 1.2 #1 0.5 YXXXX #4 1.5 1.9 #3 2.0 0.05 #4 #1 0.75 0.05 0.75 1.1 1.4 3.2 x 2.5 x 0.75 mm 2.2 3.2 0.05 2.1 #3 0.9 #2 #1 0.9 0.75 0.05 #2 1.2 #1 0.7 YXXXX #4 1.9 #3 2.5 0.05 #4 1.4 5.0 x 3.2 x 0.75 mm 2.54 5.0 0.05 2.39 #2 0.75 0.05 #1 #4 #2 #1 1.6 2.2 1.1 YXXXX #3 0.8 #3 3.2 0.05 #4 1.5 1.15 7.0 x 5.0 x 0.90 mm 5.08 5.08 2.0 1.1 3.81 2.6 0.90 0.10 YXXXX 5.0 0.05 7.0 0.05 1.4 2.2 Page 3 of 6 Pin Func!onality Pin Connec!ons Pin Symbol 1 OE/ ST Top View Func!onality Output Enable H or Open(1): specified frequency output L: output is high impedance. Only output driver is disabled. Standby H or Open(1): specified frequency output L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to I_std. 2 GND Power Electrical ground(2) 3 OUT Output Oscillator output 4 VDD Power Power supply voltage(2) OE/ST 1 4 VDD GND 2 3 OUT H = `High', L = `Low' 1) A pull-up resistor of <10 k between OE/ ST pin and Vdd is recommended in high noise environment 2) A Capacitor value of 0.1uF between Vdd and GND is recommended Environmental Environmental Compliance Parameter Condi!ons Mechanical Shock MIL-STD-883 Method 2002; (10,000g) Mechanical Vibra!on MIL-STD-883 Method 2007; Condi!on C 70g Moisture Resistance JESD22-A113; MSL-1 condi!ons (125C 24 hours bake, 85%RH/85C 168 hours, 3 Reflows 260C) Temperature Cycle JESD22, Method A104 Solderability MIL-STD-883F, Method 2003 Absolute Maximum Ra!ngs A$empted opera!on outside the absolute maximum ra!ngs of the part may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the opera!onal specifica!ons, not at absolute maximum ra!ngs Maximum Ra!ngs Parameter Min. Max. Unit Storage Temperature -65 150 C VDD -0.5 4 V Electrosta!c Discharge - 2000 V Soldering Temperature (follow standard Pb free soldering guidelines) - 260 C Junc!on Temperature - 150 C Thermal Data Thermal Considera!ons Package JA, 4 Layer Board (C/W) JA, 2 Layer Board (C/W) 7050 191 263 30 5032 97 199 24 3225 109 212 27 2520 117 222 26 2016 124 227 26 Page 4 of 6 JC, Bo$om (C/W) Ordering Informa*on HT - MM900A C - 7 F - E E - 25M0000000 Frequency Product HT: High Temperature Feature Pin E: Enable/Disable S: Standby Family MM900A Temp Range C: -55 to 125C 7: -40 to 125C F: -40 to 105C E: -40 to 85C Package 2: 4 pin 7.0mm x 5.0mm 4: 4 pin 5.0mm x 3.2mm 6: 4 pin 3.2mm x 2.5mm 7: 4 pin 2.5mm x 2.0mm 9: 4 pin 2.0mm x 1.6mm Stability E: 20ppm F: 25ppm K: 50ppm Supply Voltage E: +3.3 Vdc F: +3.0 Vdc G: +2.8 Vdc H: +2.5 Vdc J: +1.8 Vdc * Add _SNPBDIP for tin lead solder dip Example: HT-MM900AC-6K-EE-125M000000_SNPBDIP Notes: 1. Unless otherwise stated all values are valid a"er warm-up #me and refer to typical condi#ons for supply voltage, load, temperature (25C). 2. Subject to technical modifica#on. 3. Contact factory for availability. 4. Outside standard frequency ranges (see table at right) check with factory for availability Standard Frequency Ranges: Outside this check with Vectron For -40 to 125 !C or -40 to 105!C For -55 to 125!C 1.000000 to 61.222999 1.000000 to 61.222999 61.674001 to 69.795999 61.674001 to 69.239999 70.485001 to 79.062999 70.827001 to 78.714999 79.162001 to 81.427999 79.561001 to 80.159999 82.232001 to 91.833999 80.174001 to 80.779999 92.155001 to 94.248999 82.632001 to 91.833999 94.430001 to 94.874999 95.474001 to 96.191999 94.994001 to 97.713999 96.209001 to 96.935999 98.679001 to 110.00000 99.158001 to 110.000000 115.194001 to 117.810999 119.342001 to 120.238999 118.038001 to 118.593999 120.262001 to 121.169999 118.743001 to 122.141999 121.243001 to 121.600999 122.705001 to 123.021999 123.948001 to 137.000000 123.348001 to 137.000000 Page 5 of 6 Revision History Revision Change Summary Date 1.0 Product Release June 2013 1.1 Knowles logo and address change Feb 2014 1.2 Expanded frequency range to 137MHz March 2014 1.3 Add 20ppm temperature stability Aug 2014 1.4 Update logo and contact informa!on, add "SNPBDIP" odering op!on Aug 2018 Page 6 of 6