AMERICAN
TECHNICAL
CERAMICS
Manufactured for ATC
INDUCTOR PRODUCTS
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
CORPORATE PROFILE
Corporate Profile
American Technical Ceramics Corp. (ATC) provides component and custom integrated packaging solutions for the
RF, microwave and telecommunications industries. For over forty years we have been “The Engineer’s Choice”.
ATC designs, develops, manufactures and markets Multilayer Capacitors, Single Layer Capacitors, Resistive Products,
Inductors and Custom Thin Film Products for RF, microwave and millimeter-wave applications. Our products are
primarily focused on the wireless communications infrastructure, fiber optic, medical electronics, semiconductor
manufacturing equipment, defense, aerospace, and satellite communications markets.
Customer interface is administered by our own personnel and independent sales representatives. American Technical
Ceramics is headquartered in Huntington Station, New York and has an Advanced Technology Center in Jacksonville,
Florida. This is the center of excellence for our traditional product lines and the development and manufacturing
facilities for Thin Film and Resistive products.
As part of our globalization initiative ATC has a wholly-owned subsidiary for European Direct Sales, Applications
Support and Distribution, located in Huddinge, Sweden. The Company’s wholly-owned subsidiary offering Technical
Support for Asia is located in Shenzhen, P.R. China. ATC also has a local office in Guildford, England.
Markets Served
• Wireless Communications
Infrastructure
• Fiber Optics
• Wireless Handsets
• Automotive Electronics
• LMDS/MMDS
• Semiconductor Manufacturing
Equipment
• Medical Diagnostic Equipment
• Telecommunications
• Military and Aerospace
RLC Product Offerings
• Multilayer Ceramic Capacitors
• Single Layer Ceramic Capacitors
• Resistive Products
• Inductors
Process and Packaging Offerings
• Thin Film Custom Products
Facilities
• Huntington Station, New York –
Sales, Applications Support,
Manufacturing and Distribution Center
• Huddinge, Sweden –
European Operations and
Distribution Center
• Jacksonville, Florida –
Advanced Technology Center,
Manufacturing Facility.
sATC’s Jacksonville Facility occupies approximately 100,000 sq. ft.
sATC’s New York Facility occupies approximately 90,000 sq. ft.
1
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
G E N E R A L S P E C I F I C A T I O N S
Introducing ATC’s New WL Series, High Frequency Wire Wound Chip Inductors
ATC introduces its new family of RF surface mount inductor components, intended to complement its high
frequency ultra low ESR capacitor products. The WL Series Wire Wound Chip Inductor Products have been designed
to provide excellent performance at competitive prices.
This Series includes the most widely used traditional EIA case sizes – 0402, 0603, 0805, 1008, and 1206. The WL
Inductor Product line is intended for RF and microwave applications and features high self-resonant frequencies
(SRF), high Q, and low DC resistance. These products are manufactured on a rugged core made of high quality
ceramic material that exhibits high Q at high operating frequencies.
The WL Series is especially attractive for all 800 MHz to 3.4 GHz wireless applications where cost and performance
are major factors. These applications include but are not limited to: cellular base stations, broadband wireless
services, point-to-point and point-to-multipoint radio as well as other RF and microwave telecommunications
systems.
All WL Series Inductor Products are supplied in tape and reel (2000 to 4000 parts per reel depending on case size) as
standard, making them ideal for automated pick and place manufacturing applications. The terminations consist of a
barrier layer with a lead-free tin-plated finish that exhibits excellent solderability for trouble-free attachments.
Features
• High Q
• High SRF
• Low DC Resistance
• Wide Range of Standard EIA Inductance Values
1 nH to 15000 nH
• Traditional EIA Case Sizes 0402, 0603, 0805, 1008,
and 1206
• Lead-Free, RoHS Compliant Terminations,
Tin Plated over Nickel Barrier
• Rugged Ceramic Core Construction
• Tape and Reel for Automated Placement
General Electrical Specifications:
• Inductance Range: 1 nH to 15000 nH, See Tables
• Operating Temperature: -40°C to +125°C
• Temperature Coefficient of Inductance (TCL):
+25 to +125 ppm/°C Typical From -40°C to +125°C
• Rated Current: See Tables, Pages 2-6
• SRF: See Tables, Pages 2-6
• IDC: See Tables, Pages 2-6
• RDC: See Tables, Pages 2-6
Applications:
• Cellular Base Station Equipment
• Broadband Wireless Services
• Point-to-Point and Point-to-Multipoint Radio
• Satcom Equipment
• Telecommunications Wireless Applications
• RF and Microwave Communications Systems
Circuit Applications:
• Amplifier Matching Networks
• Bias Networks
• Filters
• Oscillators
• Synthesizers
Terminations
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier.
2
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC 0402 WL SERIES WIRE WOUND CHIP INDUCTORS
Inductance (nH) Tolerance
Code
Q
min.
SRF (GHz)
min.
RDC (Ohms)
max.
IDC (mA)
max.
900 MHz 1.7 GHz
L typ. Q typ. L typ. Q typ.
1.0 @ 250 (MHz) J, K 16 12.7 0.045 1360 1.02 77 1.02 69
1.2 @ 250 (MHz) J, K 1412.0 0.045 1360
– – – –
1.9 @ 250 (MHz) J, K 16 11.3 0.070 1040 1.72 68 1.74 82
2.0 @ 250 (MHz) J, K 1611.1 0.070 1040 1.93 541.93 75
2.2 @ 250 (MHz) J, K 19 10.8 0.070 960 2.19 59 2.23 100
2.4 @ 250 (MHz) J, K 1510.5 0.070 790 2.24 512.27 68
2.7 @ 250 (MHz) J, K 16 10.4 0.120 640 2.23 42 2.25 61
3.3 @ 250 (MHz) G, J, K 197.00 0.066 840 3.10 653.12 87
3.6 @ 250 (MHz) G, J, K 19 6.80 0.066 840 3.56 65 3.62 71
3.9 @ 250 (MHz) G, J, K 195.80 0.066 840 3.89 504.00 75
4.3 @ 250 (MHz) G, J, K 18 6.00 0.090 700 4.19 47 4.30 71
4.7 @ 250 (MHz) G, J, K 15 4.70 0.130 640 4.55 48 4.68 68
5.1 @ 250 (MHz) G, J, K 20 4.80 0.083 800 5.15 56 5.25 82
5.6 @ 250 (MHz) G, J, K 204.80 0.083 760 5.16 545.28 81
6.2 @ 250 (MHz) G, J, K 20 4.80 0.083 760 6.16 52 6.37 76
6.8 @ 250 (MHz) G, J, K 204.80 0.080 680 6.56 636.93 78
7.5 @ 250 (MHz) G, J, K 22 4.80 0.104 680 7.91 60 8.22 88
8.2 @ 250 (MHz) G, J, K 224.40 0.104 680 8.50 578.85 84
8.7 @ 250 (MHz) G, J, K 18 4.10 0.200 480 8.78 54 9.21 73
9.0 @ 250 (MHz) G, J, K 224.16 0.104 680 9.07 629.53 78
9.5 @ 250 (MHz) G, J, K 18 4.00 0.200 480 9.42 54 9.98 69
10 @ 250 (MHz) G, J, K 21 3.90 0.195 480 9.8 50 10.1 67
11 @ 250 (MHz) G, J, K 24 3.68 0.120 640 10.7 52 11.2 78
12 @ 250 (MHz) G, J, K 24 3.60 0.120 640 11.9 53 12.7 71
13 @ 250 (MHz) G, J, K 24 3.45 0.210 440 13.4 51 14.6 57
15 @ 250 (MHz) G, J, K 243.28 0.172 560 14.6 5515.5 77
16 @ 250 (MHz) G, J, K 24 3.10 0.220 560 16.6 46 18.8 47
18 @ 250 (MHz) G, J, K 243.10 0.230 420 18.3 5720.3 62
19 @ 250 (MHz) G, J, K 24 3.04 0.202 480 19.1 50 21.1 67
20 @ 250 (MHz) G, J, K 253.00 0.250 420 20.7 5223.7 53
22 @ 250 (MHz) G, J, K 25 2.80 0.300 400 23.2 53 26.8 53
23 @ 250 (MHz) G, J, K 24 2.72 0.214 400 23.8 49 26.9 64
24 @ 250 (MHz) G, J, K 25 2.70 0.300 400 25.1 51 29.5 50
27 @ 250 (MHz) G, J, K 24 2.48 0.298 400 28.7 49 33.5 63
30 @ 250 (MHz) G, J, K 25 2.35 0.350 400 31.1 46 38.5 39
33 @ 250 (MHz) G, J, K 24 2.35 0.350 400 34.9 31 41.7 32
36 @ 250 (MHz) G, J, K 24 2.32 0.403 320 39.5 44 48.4 53
39 @ 250 (MHz) G, J, K 25 2.10 0.550 200 41.7 47 50.2 45
40 @ 250 (MHz) G, J, K 24 2.24 0.438 320 39.0 44 47.4 33
43 @ 250 (MHz) G, J, K 25 2.03 0.810 100 45.8 46 61.6 34
47 @ 250 (MHz) G, J, K 20 2.10 0.830 150 50.0 38 59.4 37
51 @ 250 (MHz) G, J, K 25 1.75 0.820 100 50.4 47 59.4 37
56 @ 250 (MHz) G, J, K 25 1.76 0.970 100 57.4 49 72.4 40
68 @ 250 (MHz) G, J, K 22 1.62 1.120 100 69.6 45 83.4 38
82 @ 250 (MHz) G, J, K 22 1.26 1.550 50
––––
100 @ 250 (MHz) G, J, K 22 1.16 2.000 30
– – – –
The above part number refers to an ATC 0402 WL wire wound chip inductor, 10 nH, K (±10%) tolerance, in tape and reel packaging.
Tighter tolerances are available. Consult factory.
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier.
0402 WL 100 K T
EIA Case Size: 0402, 0603, 0805, 1008, 1206
Wire Wound Inductor
Inductance value in nH.
1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point.
ATC Part Number Code
Inductance Tolerances
Code GJK
Tol. ± 2% ± 5% ± 10%
Packaging: T - Tape & Reel
Tolerance: See table below.
NOTE: For Mechanical Configurations, see page 7.
3
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC 0603 WL SERIES WIRE WOUND CHIP INDUCTORS
Inductance (nH) Tolerance
Code
Q
min.
SRF (MHz)
min.
RDC (Ohms)
max.
IDC (mA)
max.
900 MHz 1.7 GHz
L typ. Q typ. L typ. Q typ.
1.6 @ 250 (MHz) J, K 16 12,500 0.040 700 1.53 35 1.58 55
1.8 @ 250 (MHz) J, K 16 12,500 0.045 700 1.63 35 1.66 50
2.2 @ 250 (MHz) J, K 15 6000 0.100 700 2.18 41 2.20 64
2.3 @ 250 (MHz) J, K 16>4000 0.140 700 2.32 322.35 40
3.3 @ 250 (MHz) G, J, K 226000 0.080 700 3.35 473.40 65
3.6 @ 250 (MHz) G, J, K 225900 0.063 700 3.72 533.71 65
3.9 @ 250 (MHz) G, J, K 226900 0.080 700 3.95 493.96 67
4.3 @ 250 (MHz) G, J, K 22 5900 0.063 700 4.32 50 4.33 70
4.5 @ 250 (MHz) G, J. K 205800 0.120 700 4.74 554.87 92
4.7 @ 250 (MHz) G, J, K 205800 0.116 700 4.72 474.75 57
5.1 @ 250 (MHz) G, J, K 205700 0.140 700 4.93 474.95 56
5.6 @ 250 (MHz) G, J, K 205800 0.170 700 5.53 565.86 77
6.2 @ 250 (MHz) G, J, K 255800 0.110 700 6.28 606.40 85
6.3 @ 250 (MHz) G, J, K 25 5800 0.110 700 6.67 41 6.86 61
6.8 @ 250 (MHz) G, J, K 275800 0.110 700 6.75 607.10 81
7.5 @ 250 (MHz) G, J, K 28 4800 0.106 700 7.70 60 7.82 65
8.2 @ 250 (MHz) G, J, K 284700 0.109 700 8.30 608.50 60Green
8.7 @ 250 (MHz) G, J, K 284600 0.109 700 8.86 629.32 58Yellow
9.1 @ 250 (MHz) G, J, K 35 4800 0.130 700 9.20 70 9.70 80 Black
9.5 @ 250 (MHz) G, J, K 28 5400 0.135 700 9.70 59 9.92 61 Blue
10 @ 250 (MHz) G, J, K 31 4800 0.130 700 10.00 66 10.60 83 Orange
11 @ 250 (MHz) G, J, K 33 4000 0.086 700 11.00 53 11.50 5 Gray
12 @ 250 (MHz) G, J, K 354000 0.130 700 12.30 7213.50 83Yellow
15 @ 250 (MHz) G, J, K 35 4000 0.170 700 15.40 64 16.80 89 Green
16 @ 250 (MHz) G, J, K 343300 0.104 700 16.20 5517.30 52White
17 @ 250 (MHz) G, J, K 353200 0.170 700 17.60 5619.40 44Red
18 @ 250 (MHz) G, J, K 353100 0.170 700 18.70 7021.40 69Blue
20 @ 250 (MHz) G, J, K 403000 0.190 700 20.70 8023.50 30Green
22 @ 250 (MHz) G, J, K 38 3000 0.190 700 22.80 73 26.10 71 Violet
23 @ 250 (MHz) G, J, K 382850 0.190 700 24.10 7128.00 71Orange
24 @ 250 (MHz) G, J, K 372650 0.135 700 24.50 4528.70 39Black
27 @ 250 (MHz) G, J, K 40 2800 0.220 600 29.20 74 34.60 65 Gray
30 @ 250 (MHz) G, J, K 37 2250 0.144 600 31.40 47 39.90 28 Brown
33 @ 250 (MHz) G, J, K 40 2300 0.220 600 36.00 67 49.50 42 White
36 @ 250 (MHz) G, J, K 38 2080 0.250 600 39.40 47 52.70 24 Red
39 @ 250 (MHz) G, J, K 40 2200 0.250 600 42.70 60 60.20 40 Black
43 @ 250 (MHz) G, J, K 39 2000 0.280 600 47.00 44 64.90 21 Orange
47 @ 200 (MHz) G, J, K 38 2000 0.280 600 52.20 62 77.20 35 Brown
51 @ 200 (MHz) G, J, K 38 1900 0.280 600 55.50 69 82.20 34 Blue
56 @ 200 (MHz) G, J, K 38 1900 0.310 600 62.50 56 97.00 26 Red
62 @ 200 (MHz) G, J, K 37 1800 0.340 600 68.00 40 110.00 10 Gray
68 @ 200 (MHz) G, J, K 37 1700 0.340 600 80.50 54 168.00 21 Orange
72 @ 150 (MHz) G, J, K 34 1700 0.490 400 82.00 53 135.00 20 Yellow
82 @ 150 (MHz) G, J, K 34 1700 0.540 400 96.20 54 177.00 21 Green
91 @ 150 (MHz) G, J, K 30 1700 0.500 400 110.00 50 416.40 6 Brown
100 @ 150 (MHz) G, J, K 34 1400 0.580 400 124.00 49 319.50 13 Blue
110 @ 150 (MHz) G, J, K 32 1350 0.610 300 138.00 43 342.70 15 Violet
120 @ 150 (MHz) G, J, K 32 1300 0.650 300 166.00 39 529.30 8 Gray
130 @ 150 (MHz) G, J, K 30 1400 0.720 300 185.00 60 – – White
140 @ 100 (MHz) G, J, K 28 1300 0.870 280 190.00 80 – – Blue
150 @ 150 (MHz) G, J, K 32 1300 0.950 280 230.00 25 – – White
160 @ 100 (MHz) G, J, K 25 1300 1.400 280 215.00 20 – – Yellow
180 @ 100 (MHz) G, J, K 25 1250 1.400 250 303.00 20 – – Black
220 @ 100 (MHz) G, J, K 25 1200 1.600 250 440.00 15 – – Brown
260 @ 100 (MHz) G, J, K 25 1000 2.000 200 469.00 21 – – Violet
270 @ 100 (MHz) G, J, K 25 900 2.100 200 580.00 12 – – Red
280 @ 100 (MHz) G, J, K 25 900 2.400 100 524.00 18 – – Green
300 @ 100 (MHz) G, J, K 25 750 2.500 150 539.70 21 – – Orange
330 @ 100 (MHz) G, J, K 25 900 3.800 100 440.00 15 ––Blue
390 @ 100 (MHz) G, J, K 25 900 4.350 100 580.00 12 – – Yellow
470 @ 100 (MHz) G, J, K 23 600 3.600 80 –– – –White
The above part number refers to an ATC 0603 WL wire wound chip inductor, 10 nH, J (±5%) tolerance, in tape and reel packaging.
Tighter tolerances are available. Consult factory.
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier.
0603 WL 100 J T
EIA Case Size: 0402, 0603, 0805, 1008, 1206
Wire Wound Inductor
Inductance value in nH.
1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point.
ATC Part Number Code
Inductance Tolerances
Code GJK
Tol. ± 2% ± 5% ± 10%
Packaging: T - Tape & Reel
Tolerance: See table below.
NOTE: For Mechanical Configurations, see page 7.
4
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC 0805 WL SERIES WIRE WOUND CHIP INDUCTORS
Inductance (nH) Tolerance
Code
Q (MHz)
min.
SRF (MHz)
min.
RDC (Ohms)
max.
IDC (mA)
max.
Color
Code
2.7 @ 250 (MHz) J, K 80 @ 1500 7900 0.060 800 Brown
2.8 @ 250 (MHz) J, K 80 @ 1500 7900 0.060 800 Gray
3.0 @ 250 (MHz) J, K 65 @ 1500 7900 0.060 800 White
3.3 @ 250 (MHz) J, K 50 @ 1500 7900 0.080 600 Black
5.6 @ 250 (MHz) J, K 65 @ 1500 5500 0.080 600 Orange
6.2 @ 250 (MHz) J, K 50 @ 1000 5500 0.110 600 Green
6.8 @ 250 (MHz) J, K 50 @ 1000 5500 0.110 600 Brown
7.5 @ 250 (MHz) J, K 50 @ 1000 4500 0.140 600 Green
8.2 @ 250 (MHz) J, K 50 @ 1000 4700 0.120 600 Red
8.7 @ 250 (MHz) J, K 50 @ 1000 3900 0.210 400 White
10 @ 250 (MHz) G, J, K 60 @ 500 4200 0.100 600 Blue
12 @ 250 (MHz) G, J, K 50 @ 500 4000 0.150 600 Orange
15 @ 250 (MHz) G, J, K 50 @ 500 3400 0.170 600 Yellow
18 @ 250 (MHz) G, J, K 50 @ 500 3300 0.200 600 Green
22 @ 250 (MHz) G, J, K 55 @ 500 2600 0.220 500 Blue
24 @ 250 (MHz) G, J, K 50 @ 500 2000 0.220 500 Gray
27 @ 250 (MHz) G, J, K 55 @ 500 2500 0.250 500 Violet
33 @ 250 (MHz) G, J, K 60 @ 500 2050 0.270 500 Gray
36 @ 250 (MHz) G, J, K 55 @ 500 1700 0.270 500 Orange
39 @ 250 (MHz) G, J, K 60 @ 500 2000 0.290 500 White
43 @ 200 (MHz) G, J, K 60 @ 500 1650 0.340 500 Yellow
47 @ 200 (MHz) G, J, K 60 @ 500 1650 0.310 500 Black
56 @ 200 (MHz) G, J, K 60 @ 500 1550 0.340 500 Brown
68 @ 200 (MHz) G, J, K 60 @ 500 1450 0.380 500 Red
72 @ 150 (MHz) G, J, K 65 @ 500 1400 0.400 500 Green
82 @ 150 (MHz) G, J, K 65 @ 500 1300 0.420 400 Orange
91 @ 150 (MHz) G, J, K 65 @ 500 1200 0.480 400 Black
100 @ 150 (MHz) G, J, K 65 @ 500 1200 0.460 400 Yellow
110 @ 150 (MHz) G, J, K 50 @ 250 1000 0.480 400 Brown
120 @ 150 (MHz) G, J, K 50 @ 250 1100 0.510 400 Green
150 @ 100 (MHz) G, J, K 50 @ 250 920 0.560 400 Blue
180 @ 100 (MHz) G, J, K 50 @ 250 870 0.640 400 Violet
200 @ 100 (MHz) G, J, K 50 @ 250 860 0.660 400 Orange
220 @ 100 (MHz) G, J, K 50 @ 250 850 0.700 400 Gray
240 @ 100 (MHz) G, J, K 44 @ 250 690 1.000 350 Red
250 @ 100 (MHz) G, J, K 45 @ 250 680 1.000 350 Green
270 @ 100 (MHz) G, J, K 48 @ 250 650 1.300 350 White
300 @ 100 (MHz) G, J, K 48 @ 250 620 1.200 330 Yellow
330 @ 100 (MHz) G, J, K 48 @ 250 600 1.650 310 Black
360 @ 100 (MHz) G, J, K 48 @ 250 580 1.450 300 Green
390 @ 100 (MHz) G, J, K 48 @ 250 560 1.800 290 Brown
430 @ 50 (MHz) G, J, K 33 @ 100 430 1.700 230 Blue
470 @ 50 (MHz) G, J, K 22 @ 100 375 2.000 250 Red
560 @ 25 (MHz) G, J, K 23 @ 50 340 2.100 230 Orange
600 @ 25 (MHz) G, J, K 23 @ 50 260 1.600 450 White
620 @ 25 (MHz) G, J, K 23 @ 50 220 2.200 210 Yellow
680 @ 25 (MHz) G, J, K 23 @ 50 188 2.300 190 Green
750 @ 25 (MHz) G, J, K 23 @ 50 200 2.300 180 Blue
820 @ 25 (MHz) G, J, K 23 @ 50 200 2.350 180 Violet
910 @ 25 (MHz) G, J, K 18 @ 50 120 1.900 170 Black
1000 @ 25 (MHz) G, J, K 20 @ 50 100 2.500 170 Gray
1200 @ 25 (MHz) G, J, K 18 @ 25 100 2.500 170 White
1500 @ 25 (MHz) G, J, K 16 @ 25 100 2.500 170 Black
1800 @ 25 (MHz) G, J, K 16 @ 7.9 80 2.500 170 Brown
2200 @ 25 (MHz) G, J, K 16 @ 7.9 60 2.700 160 Red
2700 @ 25 (MHz) G, J, K 16 @ 7.9 50 2.950 150 Orange
3300 @ 7.9 (MHz) G, J, K 15 @ 7.9 40 4.400 90 Blue
4700 @ 7.9 (MHz) G, J, K 15 @ 7.9 40 6.400 90 Green
The above part number refers to an ATC 0805 WL wire wound chip inductor, 10 nH, J (±10%) tolerance, in tape and reel packaging.
Tighter tolerances are available. Consult factory.
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier.
0805 WL 100 K T
EIA Case Size: 0402, 0603, 0805, 1008, 1206
Wire Wound Inductor
Inductance value in nH.
1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point.
ATC Part Number Code
Inductance Tolerances
Code GJK
Tol. ± 2% ± 5% ± 10%
Packaging: T - Tape & Reel
Tolerance: See table below.
NOTE: For Mechanical Configurations, see page 7.
5
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC 1008 WL SERIES WIRE WOUND CHIP INDUCTORS
Inductance (nH) Tolerance
Code
Q (MHz)
min.
SRF (MHz)
min.
RDC (Ohms)
max.
IDC (mA)
max.
Color
Code
4.7 @ 50 (MHz) J, K 50 @ 1500 4000 0.15 1000 Green
5.6 @ 50 (MHz) J, K 50 @ 1500 4000 0.15 1000 Black
10 @ 50 (MHz) G, J, K 50 @ 500 4100 0.08 1000 Brown
12 @ 50 (MHz) G, J, K 50 @ 500 3300 0.09 1000 Red
15 @ 50 (MHz) G, J, K 50 @ 500 2500 0.11 1000 Orange
18 @ 50 (MHz) G, J, K 50 @ 350 2400 0.12 1000 Yellow
22 @ 50 (MHz) G, J, K 55 @ 350 2400 0.12 1000 Green
24 @ 50 (MHz) G, J, K 55 @ 350 1900 0.12 1000 Blue
27 @ 50 (MHz) G, J, K 55 @ 350 1600 0.13 1000 Violet
33 @ 50 (MHz) G, J, K 60 @ 350 1600 0.14 1000 Gray
36 @ 50 (MHz) G, J, K 60 @ 350 1600 0.15 1000 Orange
39 @ 50 (MHz) G, J, K 60 @ 350 1500 0.15 1000 White
47 @ 50 (MHz) G, J, K 65 @ 350 1500 0.16 1000 Black
56 @ 50 (MHz) G, J, K 65 @ 350 1300 0.18 1000 Brown
62 @ 50 (MHz) G, J, K 65 @ 350 1250 0.20 1000 Blue
68 @ 50 (MHz) G, J, K 65 @ 350 1300 0.20 1000 Red
75 @ 50 (MHz) G, J, K 60 @ 350 1100 0.21 1000 White
82 @ 50 (MHz) G, J, K 60 @ 350 1000 0.22 1000 Orange
100 @ 25 (MHz) G, J, K 60 @ 350 1000 0.56 650 Yellow
120 @ 25 (MHz) G, J, K 60 @ 350 950 0.63 650 Green
150 @ 25 (MHz) G, J, K 45 @ 100 850 0.70 800 Blue
180 @ 25 (MHz) G, J, K 45 @ 100 750 0.77 620 Violet
220 @ 25 (MHz) G, J, K 45 @ 100 700 0.84 500 Gray
240 @ 25 (MHz) G, J, K 45 @ 100 650 0.88 500 White
270 @ 25 (MHz) G, J, K 45 @ 100 600 0.91 690 Black
300 @ 25 (MHz) G, J, K 45 @ 100 585 1.00 450 Brown
330 @ 25 (MHz) G, J, K 45 @ 100 570 1.05 450 Red
360 @ 25 (MHz) G, J, K 45 @ 100 530 1.10 470 Orange
390 @ 25 (MHz) G, J, K 45 @ 100 500 1.12 630 Yellow
430 @ 25 (MHz) G, J, K 45 @ 100 480 1.15 470 Green
470 @ 25 (MHz) G, J, K 45 @ 100 450 1.19 470 Blue
560 @ 25 (MHz) G, J, K 45 @ 100 415 1.33 580 Violet
620 @ 25 (MHz) G, J, K 45 @ 100 375 1.40 300 Gray
680 @ 25 (MHz) G, J, K 45 @ 100 375 1.47 540 White
750 @ 25 (MHz) G, J, K 45 @ 100 360 1.54 360 Black
820 @ 25 (MHz) G, J, K 45 @ 100 350 1.61 400 Brown
910 @ 25 (MHz) G, J, K 35 @ 50 320 1.68 380 Red
1000 @ 25 (MHz) G, J, K 35 @ 50 290 1.75 370 Orange
1200 @ 7.9 (MHz) G, J, K 35 @ 50 250 2.00 310 Yellow
1500 @ 7.9 (MHz) G, J, K 28 @ 50 200 2.30 330 Green
1800 @ 7.9 (MHz) G, J, K 28 @ 50 160 2.60 300 Blue
2200 @ 7.9 (MHz) G, J, K 28 @ 50 160 2.80 280 Violet
2700 @ 7.9 (MHz) G, J, K 22 @ 25 140 3.20 290 Gray
3300 @ 7.9 (MHz) G, J, K 22 @ 25 110 3.40 290 White
3900 @ 7.9 (MHz) G, J, K 20 @ 25 100 3.60 260 Black
4700 @ 7.9 (MHz) G, J, K 18 @ 25 90 4.00 260 Brown
5600 @ 7.9 (MHz) G, J, K 16 @ 7.96 20 4.00 240 Red
6800 @ 7.9 (MHz) G, J, K 15 @ 7.96 40 4.90 200 Orange
8200 @ 7.9 (MHz) G, J, K 15 @ 7.96 25 6.00 170 Yellow
10000 @ 2.52 (MHz) G, J, K 16 @ 7.96 20 9.00 150 Green
12000 @ 2.52 (MHz) G, J, K 15 @ 7.96 18 10.5 130 Blue
15000 @ 2.52 (MHz) G, J, K 15 @ 7.96 15 11.5 120 Violet
The above part number refers to an ATC 1008 WL wire wound chip inductor, 10 nH, J (±10%) tolerance, in tape and reel packaging.
Tighter tolerances are available. Consult factory.
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier.
1008 WL 100 K T
EIA Case Size: 0402, 0603, 0805, 1008, 1206
Wire Wound Inductor
Inductance value in nH.
1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point.
ATC Part Number Code
Inductance Tolerances
Code GJK
Tol. ± 2% ± 5% ± 10%
Packaging: T - Tape & Reel
Tolerance: See table below.
NOTE: For Mechanical Configurations, see page 7.
6
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC 1206 WL SERIES WIRE WOUND CHIP INDUCTORS
1206 Series available by special order non stock item, consult factory for availability.
Inductance (nH) Tolerance
Code
Q (MHz)
min.
SRF (MHz)
min.
RDC (Ohms)
max.
IDC (mA)
max.
Color
Code
6.8 @ 100 (MHz) J, K 30 @ 300 5500 .070 1000 Brown
10 @ 100 (MHz) J, K 40 @ 300 4000 .080 1000 Red
12 @ 100 (MHz) J, K 40 @ 300 3200 .080 1000 Orange
15 @ 100 (MHz) J, K 40 @ 300 3200 .100 1000 Yellow
18 @ 100 (MHz) J, K 50 @ 300 2800 .100 1000 Green
22 @ 100 (MHz) J, K 50 @ 300 2200 .100 1000 Blue
24 @ 100 (MHz) J, K 50 @ 300 2000 .100 1000 Red
27 @ 100 (MHz) G, J, K 50 @ 300 1800 .110 1000 Violet
33 @ 100 (MHz) G, J, K 55 @ 300 1800 .110 1000 Gray
39 @ 100 (MHz) G, J, K 55 @ 300 1800 .120 1000 White
47 @ 100 (MHz) G, J, K 55 @300 1500 .130 1000 Black
56 @ 100 (MHz) G, J, K 55 @ 300 1450 .140 1000 Brown
68 @ 100 (MHz) G, J, K 55 @ 300 1200 .260 950 Red
82 @ 100 (MHz) G, J, K 55 @ 300 1200 .210 920 Orange
91 @ 100 (MHz) G, J, K 55 @ 300 1100 .240 900 White
100 @ 100 (MHz) G, J, K 55 @ 300 1100 .260 850 Yellow
120 @ 100 (MHz) G, J, K 55 @ 300 750 .260 800 Green
150 @ 100 (MHz) G, J, K 60 @ 300 950 .310 750 Blue
180 @ 50 (MHz) G, J, K 55 @ 300 900 .430 700 Violet
220 @ 50 (MHz) G, J, K 55 @ 300 760 .500 670 Gray
270 @ 50 (MHz) G, J, K 40 @ 300 740 .560 630 White
300 @ 50 (MHz) G, J, K 50 @ 150 680 .600 600 Green
330 @ 50 (MHz) G, J, K 45 @ 150 650 .620 590 Black
360 @ 50 (MHz) G, J, K 45 @ 150 600 .650 550 Blue
390 @ 50 (MHz) G, J, K 45 @ 150 600 .750 530 Brown
470 @ 50 (MHz) G, J, K 45 @ 150 550 1.30 490 Red
560 @ 35 (MHz) G, J, K 45 @ 150 470 1.34 460 Orange
620 @ 35 (MHz) G, J, K 45 @ 150 470 1.58 460 Gray
680 @ 35 (MHz) G, J, K 45 @ 150 450 1.58 430 Yellow
750 @ 35 (MHz) G, J, K 45 @ 150 440 2.25 320 White
820 @ 35 (MHz) G, J, K 45 @ 150 420 1.82 400 Green
910 @ 35 (MHz) G, J, K 45 @ 150 410 2.95 310 Green
1000 @ 35 (MHz) G, J, K 45 @ 150 400 2.80 320 Blue
1200 @ 35 (MHz) G, J, K 45 @ 150 380 3.20 300 Violet
The above part number refers to an ATC 1206 WL wire wound chip inductor, 10 nH, J (±10%) tolerance, in tape and reel packaging.
Tighter tolerances are available. Consult factory.
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier.
1206 WL 100 K T
EIA Case Size: 0402, 0603, 0805, 1008, 1206
Wire Wound Inductor
Inductance value in nH.
1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point.
ATC Part Number Code
Inductance Tolerances
Code GJK
Tol. ± 2% ± 5% ± 10%
Packaging: T - Tape & Reel
Tolerance: See table below.
NOTE: For Mechanical Configurations, see page 7.
7
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC WL SERIES WIRE WOUND CHIP INDUCTORS
Tape and Reel Specifications
ATC WL Series Inductor Products are supplied on tape and reel in standard quantities of 2000 and 4000 parts per reel (see table below), making
them ideal for automated pick and place manufacturing applications.
WL Case A BCDEFGHIPcs. / per
Size / Series Dim. Dim. Dim. Dim. Dim. Dim. Dim. Dim. Dim. reel
0402 0.32 (8.00) .044 (1.10) .080 (2.00) .070 (1.75) .140 (3.50) .070 (1.75) .080 (2.00) .024 (0.60) .010 (0.25) 4000
0603 0.32 (8.00) .044 (1.10) 0.16 (4.00) .070 (1.75) .140 (3.50) .070 (1.75) .080 (2.00) .042 (1.05) .010 (0.25) 4000
0805 0.32 (8.00) .075 (1.88) 0.16 (4.00) .095 (2.38) .140 (3.50) .070 (1.75) .080 (2.00) .054 (1.35) .008 (0.20) 2000
1008 0.32 (8.00) .109 (2.73) 0.16 (4.00) .115 (2.88) .140 (3.50) .070 (1.75) .080 (2.00) .090 (2.25) .008 (0.20) 2000
1206 0.32 (8.00) .109 (2.73) 0.16 (4.00) .115 (2.88) .140 (3.50) .070 (1.75) .080 (2.00) 0.10 (2.50) .008 (0.20) 2000
Embossed Carrier
Embossed Cavity
Thickness: 0.004 (0.1) Max.
A ± 0.01
(0.25)
(4.00 ± 0.10)
(ø1.52) G ± .002 (0.05)
E ± 0.02(0.50)
F ± .004 (0.10)
I ± .002
(0.05)
H ± .0 02 (0.05)
D ± .004(0.10)
C ± .004 (0.10)
B ± .004 (0.10)
ø 0.06 (1.52)
ø 0.06
0.16 ± .004
Packaging Tape Dimensions
B
E
A
F
F
G
C
D
H
I
I
J
Pad
Layout
Bottom
View
Side
View
Mechanical Configurations
WL Case
Size/Series
A
max.
B
max.
C
max.
D
ref. E F G H I J
0402 .050 (1.27) .030 (0.76) .024 (0.61) .006 (0.15) .020 (0.51) .009 (0.23) .022 (0.56) .026 (0.66) .019 (0.50) .018 (0.46)
0603 .071 (1.80) .044 (1.12) .040 (1.02) .015 (0.38) .030 (0.76) .013 (0.33) .034 (0.86) .040 (1.02) .025 (0.64) .025 (0.64)
0805 0.09 (2.29) .068 (1.73) 0.06 (1.52) 0.02 (0.51) 0.05 (1.27) 0.02 (0.51) 0.04 (1.02) 0.07 (1.78) 0.04 (1.02) 0.03 (0.76)
1008 0.16 (2.92) 0.11 (2.79) 0.08 (2.03) 0.02 (0.51) 0.08 (2.03) 0.02 (0.51) 0.06 (1.52) 0.10 (2.54) 0.04 (1.02) 0.05 (1.27)
1206 0.14 (3.56) .085 (2.16) 0.06 (1.52) 0.02 (0.51) 0.06 (1.52) 0.02 (0.51) 0.08 (2.03) 0.08 (2.03) 0.04 (1.02) 0.07 (1.78)
Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant,Tin Plated over Nickel Barrier.
Inches (mm)
8
ATC WL SERIES WIRE WOUND CHIP INDUCTORS
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
Inductor Quality Assurance:
ATC ensures that all of its contracted component manufacturing facilities are ISO 9000 Registered, and that an outgoing product quality level of
better than 100 PPM is maintained. ATC’S WL Series products have successfully passed the most rigorous environmental, mechanical and electrical
validations. All manufacturing lots receive a tollgate sample inspection of the primary parameter values used to specify an inductor. The test
equipment and fixtures listed below in the RF Measurement Table are used to verify RF performance parameters for ATC’s WL Series Inductor Products.
Item Examination Test Method Performance Specs.
1 High Temperature Storage Inductors are subjected to +125°C for 48 hours, then tested after 1 hour at room temperature. • Inductors shall not have a
shorted or open winding
• Change in inductance
shall not change more
than ±5%.
• Change in Q shall not
change more than ±10%.
2 Low Temperature Storage Inductors are subjected to
–
40°C for 48 hours, then tested after 1 hour at room temperature
3 Thermal Shock Inductors are subjected to 10 cycles of
–
40°C for 30 min. and +125°C for 30 min., then tested after
1 hour at room temperature.
4 Moisture Resistance Inductors are subjected to 10 25-hour cycles from 25°C to 65°C at 80 to 90% RH, and are exposured to
–
10°C for 3 hours during one of the cycles. Samples are then tested after 2 hours at room temperature.
5 Life Test Inductors are subjected to 110°C for 1,000 hours at rated current. Samples are then tested after 1
hour at room temperature.
Item Examination Test Method Performance Specifications
1 Solderability Dip Dip terminals into molten Sn63 at 235°C for 5 sec. Terminals shall exhibit a continuous solder coating free of
defects for a minimum of 95% of surface.
2 Adhesion Reflow solder to circuit lands. A force gauge is applied to side of component 1 lb. for 0402, 2 lbs. for 0603, 4 lbs. for all larger parts
3 Vibration 10 to 2000 Hz, 5 Gs for 20 minutes, 12 cycles each, 3 orientations 1. No mechanical damage 2. Change in L less than ±5%
3. Change in Q less than ±10%
4Mechanical
Shock
MIL-STD-202, method 213, condition A. Test mounted parts 2 axes
6 times (50 G’s, 11 ms, half-sine).
1. No mechanical damage 2. Change in L less than ±5%
3. Change in Q less than ±10%
Measured Parameter Test Equipment Fixture(s)
Inductance (L) HP 4291B Impedance Analyzer Bottom Electrode SMD Test Fixture, Model 16197A
Quality Factor (Q)
Self Resonant Frequency (SRF) HP 8722D Vector Network Analyzer Anritsu Universal test fixture Model 3680K with substrate DUT adapters
DC Resistance (DCR) Micro-ohm meter Four Wire Kelvin Probes
Quality and Reliability Testing - Environmental
Quality and Reliability Testing - Mechanical
RF Test Measurements
Kit 51 DK0051
0402 WL Chip Inductors
23 different values,
15 pieces per value
1.0nH to 56nH 2.0, 2.2, 3.3, 3.6, 3.9, 5.1, 5.6, 6.2, 7.5, 8.2,
9.0, 10, 11, 12, 15, 19, 23, 27, 36, 40, 47, 56
1.0
5%
10%
$140.00
DK0052
Kit 52 1.6nH to 390nH
0603 WL Chip Inductors
42 different values,
15 pieces per value
1.6, 1.8, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.8, 7.5, 8.2, 8.7, 9.5, 10, 11,
12, 15, 16, 18, 22, 24, 27, 30, 33, 36, 39, 43, 47, 56, 68, 72, 82, 100,
110, 120, 150, 180, 220, 270, 330, 390
5% $140.00
DK0053
Kit 53 2.8nH to
2700nH
0805 WL Chip Inductors
45 different values,
15 pieces per value
2.8, 3.0, 3.3, 5.6, 6.8, 7.5, 8.2, 10, 12, 15, 18, 22, 24, 27, 33, 36, 39, 43,
47, 56, 68, 82, 91, 100, 110, 120, 150, 180, 220, 240, 270, 330, 390,
470, 560, 620, 680, 750, 820, 1000, 1200, 1500, 1800, 2200, 2700
5% $140.00
DK0054
Kit 54 10nH to
15,000nH
1008 WL Chip Inductors
42 different values,
15 pieces per value
10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82, 100, 120, 150, 180, 220, 270,
330, 390, 470, 560, 620, 680, 750, 820, 910, 1000, 1200, 1500, 1800,
2200, 2700, 3300, 3900, 4700, 5600, 6800, 8200, 10,000, 12,000, 15,000
5% $140.00
Description Inductor Value
range (nH)
Inductor Values
(nH) Tol. Price
Item #
Kit #
Inductor Design Kits
ATC’s WL Series Inductor Design Kits contain a selection of standard inductance values for circuit prototyping.
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com ATC Europe
+46 8 6800410 • sales@atceramics-europe.com ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
CONTACT INFORMATION
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992
Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp.
Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which
may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2001 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-960 Rev. O; 5/13
ATC NORTH AMERICA
AMERICAN TECHNICAL CERAMICS
One Norden Lane, Huntington Station, NY 11746-2142
Phone: +1-631-622-4700 • Fax: +1-631-622-4748
email: sales@atceramics.com • website: www.atceramics.com
ATC EUROPE
For technical support in your region, please contact the local office in Germany or the UK. For sales orders and all
other transactions in Europe, Africa and the Middle East, please contact the ATC Sales, Applications Support and
Distribution Center in Stockholm, Sweden.
SALES, APPLICATIONS SUPPORT & DISTRIBUTION CENTER
Serving Europe, Africa and the Middle East
AMERICAN TECHNICAL CERAMICS AB
Förrådsvägen 18
SE-141 46 Huddinge, Sweden
Phone: +46 8 6800410 • Fax: +46 8 6800415 (main) • Mobile: +46 8 12131270
email: sales@atceramics-europe.com • website: www.atceramics-europe.com
ATC EUROPE - REGIONAL SATELLITE OFFICE, GERMANY
AMERICAN TECHNICAL CERAMICS AB
Förrådsvägen 18
SE-141 46 Huddinge, Sweden
Phone: +46 8 6800410 • Fax: +46 8 6800415 (main) • Mobile: +46 8 12131270
email: sales@atceramics-europe.com • website: www.atceramics-europe.com
ATC EUROPE - REGIONAL SATELLITE OFFICE, RUSSIA
AMERICAN TECHNICAL CERAMICS
Förrådsvägen 18
SE-141 46 Huddinge, Sweden
Phone: +46 8 6800410 • Fax: +46 8 6800415 (main) • Mobile: +46 8 12131270
email: sales@atceramics-europe.com • website: www.atceramics-europe.com
ATC EUROPE - REGIONAL SATELLITE OFFICE, UK
AMERICAN TECHNICAL CERAMICS
34 Pewley Way
Guildford, Surrey, England, GU1 3QA
Phone: +44 1483207402 • Fax: +46 8 6800415 • Mobile: +44 8817221903
email: mchapman@atceramics-europe.com • website: www.atceramics-europe.com
ATC ASIA / INDIA SALES AND TECHNICAL SUPPORT OFFICE
AMERICAN TECHNICAL CERAMICS (CHINA) LIMITED
Unit D & E, 11/F JunYun Century Building,
No. 6033 Chegongmiao, Shennan Road, Futian Dist. Shenzhen,
Guangdong Province, 518031 P. R. China
Phone: +86 755 2396 8759 • Fax: +86 755 2396 8442
e-mail: sales@atceramics-asia.com • website: www.atceramics-asia.com
Other ATC Product Catalogs
Custom Thin Film
Products
Single Layer
Capacitors
Multilayer Capacitors
& Power Assemblies
Inductor
Products
High Power
Resistive Products
