AMERICAN TECHNICAL CERAMICS INDUCTOR PRODUCTS Manufactured for ATC CORPORATE PROFILE Corporate Profile American Technical Ceramics Corp. (ATC) provides component and custom integrated packaging solutions for the RF, microwave and telecommunications industries. For over forty years we have been "The Engineer's Choice". ATC designs, develops, manufactures and markets Multilayer Capacitors, Single Layer Capacitors, Resistive Products, Inductors and Custom Thin Film Products for RF, microwave and millimeter-wave applications. Our products are primarily focused on the wireless communications infrastructure, fiber optic, medical electronics, semiconductor manufacturing equipment, defense, aerospace, and satellite communications markets. Customer interface is administered by our own personnel and independent sales representatives. American Technical Ceramics is headquartered in Huntington Station, New York and has an Advanced Technology Center in Jacksonville, Florida. This is the center of excellence for our traditional product lines and the development and manufacturing facilities for Thin Film and Resistive products. As part of our globalization initiative ATC has a wholly-owned subsidiary for European Direct Sales, Applications Support and Distribution, located in Huddinge, Sweden. The Company's wholly-owned subsidiary offering Technical Support for Asia is located in Shenzhen, P.R. China. ATC also has a local office in Guildford, England. Markets Served * Wireless Communications Infrastructure RLC Product Offerings * Multilayer Ceramic Capacitors * Single Layer Ceramic Capacitors * Resistive Products * Inductors Process and Packaging Offerings * Thin Film Custom Products * Fiber Optics * Wireless Handsets * Automotive Electronics * LMDS/MMDS * Semiconductor Manufacturing Equipment * Medical Diagnostic Equipment * Telecommunications * Military and Aerospace s ATC's New York Facility occupies approximately 90,000 sq. ft. Facilities * Huntington Station, New York - Sales, Applications Support, Manufacturing and Distribution Center * Huddinge, Sweden - European Operations and Distribution Center * Jacksonville, Florida - Advanced Technology Center, Manufacturing Facility. A M E R I C A N ATC North America +1-631-622-4700 * sales@atceramics.com w w s ATC's Jacksonville Facility occupies approximately 100,000 sq. ft. T E C H N I C A L C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m GENERAL SPECIFICATIONS Introducing ATC's New WL Series, High Frequency Wire Wound Chip Inductors ATC introduces its new family of RF surface mount inductor components, intended to complement its high frequency ultra low ESR capacitor products. The WL Series Wire Wound Chip Inductor Products have been designed to provide excellent performance at competitive prices. This Series includes the most widely used traditional EIA case sizes - 0402, 0603, 0805, 1008, and 1206. The WL Inductor Product line is intended for RF and microwave applications and features high self-resonant frequencies (SRF), high Q, and low DC resistance. These products are manufactured on a rugged core made of high quality ceramic material that exhibits high Q at high operating frequencies. The WL Series is especially attractive for all 800 MHz to 3.4 GHz wireless applications where cost and performance are major factors. These applications include but are not limited to: cellular base stations, broadband wireless services, point-to-point and point-to-multipoint radio as well as other RF and microwave telecommunications systems. All WL Series Inductor Products are supplied in tape and reel (2000 to 4000 parts per reel depending on case size) as standard, making them ideal for automated pick and place manufacturing applications. The terminations consist of a barrier layer with a lead-free tin-plated finish that exhibits excellent solderability for trouble-free attachments. Features Applications: * High Q * Cellular Base Station Equipment * High SRF * Broadband Wireless Services * Low DC Resistance * Point-to-Point and Point-to-Multipoint Radio * Wide Range of Standard EIA Inductance Values 1 nH to 15000 nH * Satcom Equipment * Telecommunications Wireless Applications * Traditional EIA Case Sizes 0402, 0603, 0805, 1008, and 1206 * RF and Microwave Communications Systems * Lead-Free, RoHS Compliant Terminations, Tin Plated over Nickel Barrier Circuit Applications: * Rugged Ceramic Core Construction * Amplifier Matching Networks * Tape and Reel for Automated Placement * Bias Networks * Filters General Electrical Specifications: * Oscillators * Inductance Range: 1 nH to 15000 nH, See Tables * Synthesizers * Operating Temperature: -40C to +125C * Temperature Coefficient of Inductance (TCL): +25 to +125 ppm/C Typical From -40C to +125C * Rated Current: See Tables, Pages 2-6 * SRF: See Tables, Pages 2-6 * IDC: See Tables, Pages 2-6 * RDC: See Tables, Pages 2-6 A M E R I C A N ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m 1 ATC 0402 WL SERIES WIRE WOUND CHIP INDUCTORS Inductance (nH) Tolerance Code Q min. 1.0 @ 250 (MHz) 1.2 @ 250 (MHz) 1.9 @ 250 (MHz) 2.0 @ 250 (MHz) 2.2 @ 250 (MHz) 2.4 @ 250 (MHz) 2.7 @ 250 (MHz) 3.3 @ 250 (MHz) 3.6 @ 250 (MHz) 3.9 @ 250 (MHz) 4.3 @ 250 (MHz) 4.7 @ 250 (MHz) 5.1 @ 250 (MHz) 5.6 @ 250 (MHz) 6.2 @ 250 (MHz) 6.8 @ 250 (MHz) 7.5 @ 250 (MHz) 8.2 @ 250 (MHz) 8.7 @ 250 (MHz) 9.0 @ 250 (MHz) 9.5 @ 250 (MHz) 10 @ 250 (MHz) 11 @ 250 (MHz) 12 @ 250 (MHz) 13 @ 250 (MHz) 15 @ 250 (MHz) 16 @ 250 (MHz) 18 @ 250 (MHz) 19 @ 250 (MHz) 20 @ 250 (MHz) 22 @ 250 (MHz) 23 @ 250 (MHz) 24 @ 250 (MHz) 27 @ 250 (MHz) 30 @ 250 (MHz) 33 @ 250 (MHz) 36 @ 250 (MHz) 39 @ 250 (MHz) 40 @ 250 (MHz) 43 @ 250 (MHz) 47 @ 250 (MHz) 51 @ 250 (MHz) 56 @ 250 (MHz) 68 @ 250 (MHz) 82 @ 250 (MHz) 100 @ 250 (MHz) J, K J, K J, K J, K J, K J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K 16 14 16 16 19 15 16 19 19 19 18 15 20 20 20 20 22 22 18 22 18 21 24 24 24 24 24 24 24 25 25 24 25 24 25 24 24 25 24 25 20 25 25 22 22 22 SRF (GHz) min. RDC (Ohms) max. IDC (mA) max. 0.045 0.045 0.070 0.070 0.070 0.070 0.120 0.066 0.066 0.066 0.090 0.130 0.083 0.083 0.083 0.080 0.104 0.104 0.200 0.104 0.200 0.195 0.120 0.120 0.210 0.172 0.220 0.230 0.202 0.250 0.300 0.214 0.300 0.298 0.350 0.350 0.403 0.550 0.438 0.810 0.830 0.820 0.970 1.120 1.550 2.000 1360 1360 1040 1040 960 790 640 840 840 840 700 640 800 760 760 680 680 680 480 680 480 480 640 640 440 560 560 420 480 420 400 400 400 400 400 400 320 200 320 100 150 100 100 100 50 30 12.7 12.0 11.3 11.1 10.8 10.5 10.4 7.00 6.80 5.80 6.00 4.70 4.80 4.80 4.80 4.80 4.80 4.40 4.10 4.16 4.00 3.90 3.68 3.60 3.45 3.28 3.10 3.10 3.04 3.00 2.80 2.72 2.70 2.48 2.35 2.35 2.32 2.10 2.24 2.03 2.10 1.75 1.76 1.62 1.26 1.16 900 MHz L typ. Q typ. 1.02 1.7 GHz L typ. Q typ. - - 77 1.02 - - 1.72 1.93 2.19 2.24 2.23 3.10 3.56 3.89 4.19 4.55 5.15 5.16 6.16 6.56 7.91 8.50 8.78 9.07 9.42 9.8 10.7 11.9 13.4 14.6 16.6 18.3 19.1 20.7 23.2 23.8 25.1 28.7 31.1 34.9 39.5 41.7 39.0 45.8 50.0 50.4 57.4 69.6 68 54 59 51 42 65 65 50 47 48 56 54 52 63 60 57 54 62 54 50 52 53 51 55 46 57 50 52 53 49 51 49 46 31 44 47 44 46 38 47 49 45 1.74 1.93 2.23 2.27 2.25 3.12 3.62 4.00 4.30 4.68 5.25 5.28 6.37 6.93 8.22 8.85 9.21 9.53 9.98 10.1 11.2 12.7 14.6 15.5 18.8 20.3 21.1 23.7 26.8 26.9 29.5 33.5 38.5 41.7 48.4 50.2 47.4 61.6 59.4 59.4 72.4 83.4 82 75 100 68 61 87 71 75 71 68 82 81 76 78 88 84 73 78 69 67 78 71 57 77 47 62 67 53 53 64 50 63 39 32 53 45 33 34 37 37 40 38 - - - - 69 - - - - NOTE: For Mechanical Configurations, see page 7. ATC Part Number Code 0402 WL 100 K T Packaging: T - Tape & Reel EIA Case Size: 0402, 0603, 0805, 1008, 1206 Wire Wound Inductor Inductance value in nH. 1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point. Tolerance: See table below. Inductance Tolerances The above part number refers to an ATC 0402 WL wire wound chip inductor, 10 nH, K (10%) tolerance, in tape and reel packaging. Tighter tolerances are available. Consult factory. Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier. Code G J K Tol. 2% 5% 10% Terminations Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier. A M E R I C A N 2 ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 0603 WL SERIES WIRE WOUND CHIP INDUCTORS Inductance (nH) Tolerance Code Q min. 1.6 @ 250 (MHz) 1.8 @ 250 (MHz) 2.2 @ 250 (MHz) 2.3 @ 250 (MHz) 3.3 @ 250 (MHz) 3.6 @ 250 (MHz) 3.9 @ 250 (MHz) 4.3 @ 250 (MHz) 4.5 @ 250 (MHz) 4.7 @ 250 (MHz) 5.1 @ 250 (MHz) 5.6 @ 250 (MHz) 6.2 @ 250 (MHz) 6.3 @ 250 (MHz) 6.8 @ 250 (MHz) 7.5 @ 250 (MHz) 8.2 @ 250 (MHz) 8.7 @ 250 (MHz) 9.1 @ 250 (MHz) 9.5 @ 250 (MHz) 10 @ 250 (MHz) 11 @ 250 (MHz) 12 @ 250 (MHz) 15 @ 250 (MHz) 16 @ 250 (MHz) 17 @ 250 (MHz) 18 @ 250 (MHz) 20 @ 250 (MHz) 22 @ 250 (MHz) 23 @ 250 (MHz) 24 @ 250 (MHz) 27 @ 250 (MHz) 30 @ 250 (MHz) 33 @ 250 (MHz) 36 @ 250 (MHz) 39 @ 250 (MHz) 43 @ 250 (MHz) 47 @ 200 (MHz) 51 @ 200 (MHz) 56 @ 200 (MHz) 62 @ 200 (MHz) 68 @ 200 (MHz) 72 @ 150 (MHz) 82 @ 150 (MHz) 91 @ 150 (MHz) 100 @ 150 (MHz) 110 @ 150 (MHz) 120 @ 150 (MHz) 130 @ 150 (MHz) 140 @ 100 (MHz) 150 @ 150 (MHz) 160 @ 100 (MHz) 180 @ 100 (MHz) 220 @ 100 (MHz) 260 @ 100 (MHz) 270 @ 100 (MHz) 280 @ 100 (MHz) 300 @ 100 (MHz) 330 @ 100 (MHz) 390 @ 100 (MHz) 470 @ 100 (MHz) J, K J, K J, K J, K G, J, K G, J, K G, J, K G, J, K G, J. K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K 16 16 15 16 22 22 22 22 20 20 20 20 25 25 27 28 28 28 35 28 31 33 35 35 34 35 35 40 38 38 37 40 37 40 38 40 39 38 38 38 37 37 34 34 30 34 32 32 30 28 32 25 25 25 25 25 25 25 25 25 23 SRF (MHz) RDC (Ohms) min. max. 12,500 12,500 6000 >4000 6000 5900 6900 5900 5800 5800 5700 5800 5800 5800 5800 4800 4700 4600 4800 5400 4800 4000 4000 4000 3300 3200 3100 3000 3000 2850 2650 2800 2250 2300 2080 2200 2000 2000 1900 1900 1800 1700 1700 1700 1700 1400 1350 1300 1400 1300 1300 1300 1250 1200 1000 900 900 750 900 900 600 IDC (mA) max. 0.040 0.045 0.100 0.140 0.080 0.063 0.080 0.063 0.120 0.116 0.140 0.170 0.110 0.110 0.110 0.106 0.109 0.109 0.130 0.135 0.130 0.086 0.130 0.170 0.104 0.170 0.170 0.190 0.190 0.190 0.135 0.220 0.144 0.220 0.250 0.250 0.280 0.280 0.280 0.310 0.340 0.340 0.490 0.540 0.500 0.580 0.610 0.650 0.720 0.870 0.950 1.400 1.400 1.600 2.000 2.100 2.400 2.500 3.800 4.350 3.600 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 600 600 400 400 400 400 300 300 300 280 280 280 250 250 200 200 100 150 100 100 80 900 MHz L typ. Q typ. 1.7 GHz L typ. Q typ. 1.53 1.63 2.18 2.32 3.35 3.72 3.95 4.32 4.74 4.72 4.93 5.53 6.28 6.67 6.75 7.70 8.30 8.86 9.20 9.70 10.00 11.00 12.30 15.40 16.20 17.60 18.70 20.70 22.80 24.10 24.50 29.20 31.40 36.00 39.40 42.70 47.00 52.20 55.50 62.50 68.00 80.50 82.00 96.20 110.00 124.00 138.00 166.00 185.00 190.00 230.00 215.00 303.00 440.00 469.00 580.00 524.00 539.70 440.00 580.00 - 1.58 1.66 2.20 2.35 3.40 3.71 3.96 4.33 4.87 4.75 4.95 5.86 6.40 6.86 7.10 7.82 8.50 9.32 9.70 9.92 10.60 11.50 13.50 16.80 17.30 19.40 21.40 23.50 26.10 28.00 28.70 34.60 39.90 49.50 52.70 60.20 64.90 77.20 82.20 97.00 110.00 168.00 135.00 177.00 416.40 319.50 342.70 529.30 - - - - - - - - - - - - - 35 35 41 32 47 53 49 50 55 47 47 56 60 41 60 60 60 62 70 59 66 53 72 64 55 56 70 80 73 71 45 74 47 67 47 60 44 62 69 56 40 54 53 54 50 49 43 39 60 80 25 20 20 15 21 12 18 21 15 12 - 55 50 64 40 65 65 67 70 92 57 56 77 85 61 81 65 60 58 80 61 83 5 83 89 52 44 69 30 71 71 39 65 28 42 24 40 21 35 34 26 10 21 20 21 6 13 15 8 - - - - - - - - - - - - - Green Yellow Black Blue Orange Gray Yellow Green White Red Blue Green Violet Orange Black Gray Brown White Red Black Orange Brown Blue Red Gray Orange Yellow Green Brown Blue Violet Gray White Blue White Yellow Black Brown Violet Red Green Orange Blue Yellow White NOTE: For Mechanical Configurations, see page 7. ATC Part Number Code 0603 WL 100 J T Packaging: T - Tape & Reel EIA Case Size: 0402, 0603, 0805, 1008, 1206 Wire Wound Inductor Inductance value in nH. 1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point. Tolerance: See table below. Inductance Tolerances The above part number refers to an ATC 0603 WL wire wound chip inductor, 10 nH, J (5%) tolerance, in tape and reel packaging. Tighter tolerances are available. Consult factory. Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier. A M E R I C A N ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L . a t c e r a m i c G J K Tol. 2% 5% 10% C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Code s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m 3 ATC 0805 WL SERIES WIRE WOUND CHIP INDUCTORS Inductance (nH) Tolerance Code Q (MHz) min. SRF (MHz) min. RDC (Ohms) max. IDC (mA) max. Color Code J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K 80 @ 1500 80 @ 1500 65 @ 1500 50 @ 1500 65 @ 1500 50 @ 1000 50 @ 1000 50 @ 1000 50 @ 1000 50 @ 1000 60 @ 500 50 @ 500 50 @ 500 50 @ 500 55 @ 500 50 @ 500 55 @ 500 60 @ 500 55 @ 500 60 @ 500 60 @ 500 60 @ 500 60 @ 500 60 @ 500 65 @ 500 65 @ 500 65 @ 500 65 @ 500 50 @ 250 50 @ 250 50 @ 250 50 @ 250 50 @ 250 50 @ 250 44 @ 250 45 @ 250 48 @ 250 48 @ 250 48 @ 250 48 @ 250 48 @ 250 33 @ 100 22 @ 100 23 @ 50 23 @ 50 23 @ 50 23 @ 50 23 @ 50 23 @ 50 18 @ 50 20 @ 50 18 @ 25 16 @ 25 16 @ 7.9 16 @ 7.9 16 @ 7.9 15 @ 7.9 15 @ 7.9 7900 7900 7900 7900 5500 5500 5500 4500 4700 3900 4200 4000 3400 3300 2600 2000 2500 2050 1700 2000 1650 1650 1550 1450 1400 1300 1200 1200 1000 1100 920 870 860 850 690 680 650 620 600 580 560 430 375 340 260 220 188 200 200 120 100 100 100 80 60 50 40 40 0.060 0.060 0.060 0.080 0.080 0.110 0.110 0.140 0.120 0.210 0.100 0.150 0.170 0.200 0.220 0.220 0.250 0.270 0.270 0.290 0.340 0.310 0.340 0.380 0.400 0.420 0.480 0.460 0.480 0.510 0.560 0.640 0.660 0.700 1.000 1.000 1.300 1.200 1.650 1.450 1.800 1.700 2.000 2.100 1.600 2.200 2.300 2.300 2.350 1.900 2.500 2.500 2.500 2.500 2.700 2.950 4.400 6.400 800 800 800 600 600 600 600 600 600 400 600 600 600 600 500 500 500 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 350 350 350 330 310 300 290 230 250 230 450 210 190 180 180 170 170 170 170 170 160 150 90 90 Brown Gray White Black Orange Green Brown Green Red White Blue Orange Yellow Green Blue Gray Violet Gray Orange White Yellow Black Brown Red Green Orange Black Yellow Brown Green Blue Violet Orange Gray Red Green White Yellow Black Green Brown Blue Red Orange White Yellow Green Blue Violet Black Gray White Black Brown Red Orange Blue Green 2.7 @ 250 (MHz) 2.8 @ 250 (MHz) 3.0 @ 250 (MHz) 3.3 @ 250 (MHz) 5.6 @ 250 (MHz) 6.2 @ 250 (MHz) 6.8 @ 250 (MHz) 7.5 @ 250 (MHz) 8.2 @ 250 (MHz) 8.7 @ 250 (MHz) 10 @ 250 (MHz) 12 @ 250 (MHz) 15 @ 250 (MHz) 18 @ 250 (MHz) 22 @ 250 (MHz) 24 @ 250 (MHz) 27 @ 250 (MHz) 33 @ 250 (MHz) 36 @ 250 (MHz) 39 @ 250 (MHz) 43 @ 200 (MHz) 47 @ 200 (MHz) 56 @ 200 (MHz) 68 @ 200 (MHz) 72 @ 150 (MHz) 82 @ 150 (MHz) 91 @ 150 (MHz) 100 @ 150 (MHz) 110 @ 150 (MHz) 120 @ 150 (MHz) 150 @ 100 (MHz) 180 @ 100 (MHz) 200 @ 100 (MHz) 220 @ 100 (MHz) 240 @ 100 (MHz) 250 @ 100 (MHz) 270 @ 100 (MHz) 300 @ 100 (MHz) 330 @ 100 (MHz) 360 @ 100 (MHz) 390 @ 100 (MHz) 430 @ 50 (MHz) 470 @ 50 (MHz) 560 @ 25 (MHz) 600 @ 25 (MHz) 620 @ 25 (MHz) 680 @ 25 (MHz) 750 @ 25 (MHz) 820 @ 25 (MHz) 910 @ 25 (MHz) 1000 @ 25 (MHz) 1200 @ 25 (MHz) 1500 @ 25 (MHz) 1800 @ 25 (MHz) 2200 @ 25 (MHz) 2700 @ 25 (MHz) 3300 @ 7.9 (MHz) 4700 @ 7.9 (MHz) NOTE: For Mechanical Configurations, see page 7. ATC Part Number Code 0805 WL 100 K T Packaging: T - Tape & Reel EIA Case Size: 0402, 0603, 0805, 1008, 1206 Wire Wound Inductor Inductance value in nH. 1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point. Tolerance: See table below. Inductance Tolerances The above part number refers to an ATC 0805 WL wire wound chip inductor, 10 nH, J (10%) tolerance, in tape and reel packaging. Tighter tolerances are available. Consult factory. Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier. A M E R I C A N 4 ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L . a t c e r a m i c G J K Tol. 2% 5% 10% C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Code s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 1008 WL SERIES WIRE WOUND CHIP INDUCTORS Inductance (nH) Tolerance Code Q (MHz) min. J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K 50 @ 1500 50 @ 1500 50 @ 500 50 @ 500 50 @ 500 50 @ 350 55 @ 350 55 @ 350 55 @ 350 60 @ 350 60 @ 350 60 @ 350 65 @ 350 65 @ 350 65 @ 350 65 @ 350 60 @ 350 60 @ 350 60 @ 350 60 @ 350 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 45 @ 100 35 @ 50 35 @ 50 35 @ 50 28 @ 50 28 @ 50 28 @ 50 22 @ 25 22 @ 25 20 @ 25 18 @ 25 16 @ 7.96 15 @ 7.96 15 @ 7.96 16 @ 7.96 15 @ 7.96 15 @ 7.96 4.7 @ 50 (MHz) 5.6 @ 50 (MHz) 10 @ 50 (MHz) 12 @ 50 (MHz) 15 @ 50 (MHz) 18 @ 50 (MHz) 22 @ 50 (MHz) 24 @ 50 (MHz) 27 @ 50 (MHz) 33 @ 50 (MHz) 36 @ 50 (MHz) 39 @ 50 (MHz) 47 @ 50 (MHz) 56 @ 50 (MHz) 62 @ 50 (MHz) 68 @ 50 (MHz) 75 @ 50 (MHz) 82 @ 50 (MHz) 100 @ 25 (MHz) 120 @ 25 (MHz) 150 @ 25 (MHz) 180 @ 25 (MHz) 220 @ 25 (MHz) 240 @ 25 (MHz) 270 @ 25 (MHz) 300 @ 25 (MHz) 330 @ 25 (MHz) 360 @ 25 (MHz) 390 @ 25 (MHz) 430 @ 25 (MHz) 470 @ 25 (MHz) 560 @ 25 (MHz) 620 @ 25 (MHz) 680 @ 25 (MHz) 750 @ 25 (MHz) 820 @ 25 (MHz) 910 @ 25 (MHz) 1000 @ 25 (MHz) 1200 @ 7.9 (MHz) 1500 @ 7.9 (MHz) 1800 @ 7.9 (MHz) 2200 @ 7.9 (MHz) 2700 @ 7.9 (MHz) 3300 @ 7.9 (MHz) 3900 @ 7.9 (MHz) 4700 @ 7.9 (MHz) 5600 @ 7.9 (MHz) 6800 @ 7.9 (MHz) 8200 @ 7.9 (MHz) 10000 @ 2.52 (MHz) 12000 @ 2.52 (MHz) 15000 @ 2.52 (MHz) SRF (MHz) min. 4000 4000 4100 3300 2500 2400 2400 1900 1600 1600 1600 1500 1500 1300 1250 1300 1100 1000 1000 950 850 750 700 650 600 585 570 530 500 480 450 415 375 375 360 350 320 290 250 200 160 160 140 110 100 90 20 40 25 20 18 15 RDC (Ohms) max. IDC (mA) max. Color Code 0.15 0.15 0.08 0.09 0.11 0.12 0.12 0.12 0.13 0.14 0.15 0.15 0.16 0.18 0.20 0.20 0.21 0.22 0.56 0.63 0.70 0.77 0.84 0.88 0.91 1.00 1.05 1.10 1.12 1.15 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 2.00 2.30 2.60 2.80 3.20 3.40 3.60 4.00 4.00 4.90 6.00 9.00 10.5 11.5 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 800 620 500 500 690 450 450 470 630 470 470 580 300 540 360 400 380 370 310 330 300 280 290 290 260 260 240 200 170 150 130 120 Green Black Brown Red Orange Yellow Green Blue Violet Gray Orange White Black Brown Blue Red White Orange Yellow Green Blue Violet Gray White Black Brown Red Orange Yellow Green Blue Violet Gray White Black Brown Red Orange Yellow Green Blue Violet Gray White Black Brown Red Orange Yellow Green Blue Violet NOTE: For Mechanical Configurations, see page 7. ATC Part Number Code 1008 WL 100 K T Packaging: T - Tape & Reel EIA Case Size: 0402, 0603, 0805, 1008, 1206 Wire Wound Inductor Inductance value in nH. 1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point. Tolerance: See table below. Inductance Tolerances The above part number refers to an ATC 1008 WL wire wound chip inductor, 10 nH, J (10%) tolerance, in tape and reel packaging. Tighter tolerances are available. Consult factory. Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier. A M E R I C A N ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L . a t c e r a m i c G J K Tol. 2% 5% 10% C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Code s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m 5 ATC 1206 WL SERIES WIRE WOUND CHIP INDUCTORS Tolerance Code Inductance (nH) 6.8 @ 100 (MHz) 10 @ 100 (MHz) 12 @ 100 (MHz) 15 @ 100 (MHz) 18 @ 100 (MHz) 22 @ 100 (MHz) 24 @ 100 (MHz) 27 @ 100 (MHz) 33 @ 100 (MHz) 39 @ 100 (MHz) 47 @ 100 (MHz) 56 @ 100 (MHz) 68 @ 100 (MHz) 82 @ 100 (MHz) 91 @ 100 (MHz) 100 @ 100 (MHz) 120 @ 100 (MHz) 150 @ 100 (MHz) 180 @ 50 (MHz) 220 @ 50 (MHz) 270 @ 50 (MHz) 300 @ 50 (MHz) 330 @ 50 (MHz) 360 @ 50 (MHz) 390 @ 50 (MHz) 470 @ 50 (MHz) 560 @ 35 (MHz) 620 @ 35 (MHz) 680 @ 35 (MHz) 750 @ 35 (MHz) 820 @ 35 (MHz) 910 @ 35 (MHz) 1000 @ 35 (MHz) 1200 @ 35 (MHz) Q (MHz) min. J, K J, K J, K J, K J, K J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K SRF (MHz) min. 30 @ 300 40 @ 300 40 @ 300 40 @ 300 50 @ 300 50 @ 300 50 @ 300 50 @ 300 55 @ 300 55 @ 300 55 @300 55 @ 300 55 @ 300 55 @ 300 55 @ 300 55 @ 300 55 @ 300 60 @ 300 55 @ 300 55 @ 300 40 @ 300 50 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 45 @ 150 RDC (Ohms) max. 5500 4000 3200 3200 2800 2200 2000 1800 1800 1800 1500 1450 1200 1200 1100 1100 750 950 900 760 740 680 650 600 600 550 470 470 450 440 420 410 400 380 .070 .080 .080 .100 .100 .100 .100 .110 .110 .120 .130 .140 .260 .210 .240 .260 .260 .310 .430 .500 .560 .600 .620 .650 .750 1.30 1.34 1.58 1.58 2.25 1.82 2.95 2.80 3.20 IDC (mA) max. Color Code 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 950 920 900 850 800 750 700 670 630 600 590 550 530 490 460 460 430 320 400 310 320 300 Brown Red Orange Yellow Green Blue Red Violet Gray White Black Brown Red Orange White Yellow Green Blue Violet Gray White Green Black Blue Brown Red Orange Gray Yellow White Green Green Blue Violet NOTE: For Mechanical Configurations, see page 7. ATC Part Number Code 1206 WL 100 K T Packaging: T - Tape & Reel EIA Case Size: 0402, 0603, 0805, 1008, 1206 Wire Wound Inductor Inductance value in nH. 1st and 2nd digits are significant digits. 3rd digit is multiplier. R is decimal point. Tolerance: See table below. Inductance Tolerances The above part number refers to an ATC 1206 WL wire wound chip inductor, 10 nH, J (10%) tolerance, in tape and reel packaging. Tighter tolerances are available. Consult factory. Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant, Tin Plated over Nickel Barrier. Code G J K Tol. 2% 5% 10% 1206 Series available by special order non stock item, consult factory for availability. A M E R I C A N 6 ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC WL SERIES WIRE WOUND CHIP INDUCTORS Mechanical Configurations B H C I F Bottom View A Side View G Pad Layout J I F E WL Case Size/Series A max. D B max. C max. D ref. E F G H I J 0402 .050 (1.27) .030 (0.76) .024 (0.61) .006 (0.15) .020 (0.51) .009 (0.23) .022 (0.56) .026 (0.66) .019 (0.50) .018 (0.46) 0603 .071 (1.80) .044 (1.12) .040 (1.02) .015 (0.38) .030 (0.76) .013 (0.33) .034 (0.86) .040 (1.02) .025 (0.64) .025 (0.64) 0805 0.09 (2.29) .068 (1.73) 0.06 (1.52) 0.02 (0.51) 0.05 (1.27) 0.02 (0.51) 0.04 (1.02) 0.07 (1.78) 0.04 (1.02) 0.03 (0.76) 1008 0.16 (2.92) 0.11 (2.79) 0.08 (2.03) 0.02 (0.51) 0.08 (2.03) 0.02 (0.51) 0.06 (1.52) 0.10 (2.54) 0.04 (1.02) 0.05 (1.27) 1206 0.14 (3.56) .085 (2.16) 0.06 (1.52) 0.02 (0.51) 0.06 (1.52) 0.02 (0.51) 0.08 (2.03) 0.08 (2.03) 0.04 (1.02) 0.07 (1.78) Inches (mm) Terminations for all WL Series Inductor Case Sizes are Lead-Free, RoHS Compliant,Tin Plated over Nickel Barrier. Tape and Reel Specifications ATC WL Series Inductor Products are supplied on tape and reel in standard quantities of 2000 and 4000 parts per reel (see table below), making them ideal for automated pick and place manufacturing applications. Packaging Tape Dimensions Thickness: 0.004 (0.1) Max. F .004 (0.10) 0.16 .004 (4.00 0.10) o 0.06 (o1.52) G .002 (0.05) I .002 (0.05) E 0.02(0.50) A 0.01 (0.25) Embossed Cavity D .004(0.10) B .004 (0.10) o 0.06 (1.52) H .002 (0.05) C .004 (0.10) Embossed Carrier WL Case Size / Series A Dim. B Dim. C Dim. D Dim. 0402 0.32 (8.00) .044 (1.10) .080 (2.00) .070 (1.75) .140 (3.50) .070 (1.75) .080 (2.00) .024 (0.60) .010 (0.25) 4000 0603 0.32 (8.00) .044 (1.10) 0.16 (4.00) .070 (1.75) .140 (3.50) .070 (1.75) .080 (2.00) .042 (1.05) .010 (0.25) 4000 0805 0.32 (8.00) .075 (1.88) 0.16 (4.00) .095 (2.38) .140 (3.50) .070 (1.75) .080 (2.00) .054 (1.35) .008 (0.20) 2000 1008 0.32 (8.00) .109 (2.73) 0.16 (4.00) .115 (2.88) .140 (3.50) .070 (1.75) .080 (2.00) .090 (2.25) .008 (0.20) 2000 1206 0.32 (8.00) .109 (2.73) 0.16 (4.00) .115 (2.88) .140 (3.50) .070 (1.75) .080 (2.00) 0.10 (2.50) .008 (0.20) 2000 A M E R I C A N ATC North America +1-631-622-4700 * sales@atceramics.com w w E Dim. F Dim. G Dim. T E C H N I C A L . a t c e r a m i c I Dim. Pcs. / per reel C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w H Dim. s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m 7 ATC WL SERIES WIRE WOUND CHIP INDUCTORS Inductor Quality Assurance: ATC ensures that all of its contracted component manufacturing facilities are ISO 9000 Registered, and that an outgoing product quality level of better than 100 PPM is maintained. ATC'S WL Series products have successfully passed the most rigorous environmental, mechanical and electrical validations. All manufacturing lots receive a tollgate sample inspection of the primary parameter values used to specify an inductor. The test equipment and fixtures listed below in the RF Measurement Table are used to verify RF performance parameters for ATC's WL Series Inductor Products. Quality and Reliability Testing - Environmental Item Examination Test Method Performance Specs. 1 High Temperature Storage Inductors are subjected to +125C for 48 hours, then tested after 1 hour at room temperature. 2 Low Temperature Storage Inductors are subjected to - 40C for 48 hours, then tested after 1 hour at room temperature 3 Thermal Shock Inductors are subjected to 10 cycles of - 40C for 30 min. and +125C for 30 min., then tested after 1 hour at room temperature. 4 Moisture Resistance Inductors are subjected to 10 25-hour cycles from 25C to 65C at 80 to 90% RH, and are exposured to -10C for 3 hours during one of the cycles. Samples are then tested after 2 hours at room temperature. 5 Life Test Inductors are subjected to 110C for 1,000 hours at rated current. Samples are then tested after 1 hour at room temperature. * Inductors shall not have a shorted or open winding * Change in inductance shall not change more than 5%. * Change in Q shall not change more than 10%. Quality and Reliability Testing - Mechanical Item Examination Test Method Performance Specifications Terminals shall exhibit a continuous solder coating free of defects for a minimum of 95% of surface. 1 Solderability Dip Dip terminals into molten Sn63 at 235C for 5 sec. 2 Adhesion Reflow solder to circuit lands. A force gauge is applied to side of component 1 lb. for 0402, 2 lbs. for 0603, 4 lbs. for all larger parts 3 Vibration 10 to 2000 Hz, 5 Gs for 20 minutes, 12 cycles each, 3 orientations 1. No mechanical damage 2. Change in L less than 5% 3. Change in Q less than 10% 4 Mechanical Shock MIL-STD-202, method 213, condition A. Test mounted parts 2 axes 6 times (50 G's, 11 ms, half-sine). 1. No mechanical damage 2. Change in L less than 5% 3. Change in Q less than 10% RF Test Measurements Measured Parameter Test Equipment Fixture(s) HP 4291B Impedance Analyzer Bottom Electrode SMD Test Fixture, Model 16197A Self Resonant Frequency (SRF) HP 8722D Vector Network Analyzer Anritsu Universal test fixture Model 3680K with substrate DUT adapters DC Resistance (DCR) Micro-ohm meter Four Wire Kelvin Probes Inductance (L) Quality Factor (Q) Inductor Design Kits ATC's WL Series Inductor Design Kits contain a selection of standard inductance values for circuit prototyping. Description Kit # Item # Kit 51 DK0051 23 different values, 15 pieces per value Kit 52 DK0052 42 different values, 15 pieces per value Kit 53 DK0053 Kit 54 DK0054 Inductor Value range (nH) Inductor Values (nH) Tol. 1.0 10% 1.0nH to 56nH 2.0, 2.2, 3.3, 3.6, 3.9, 5.1, 5.6, 6.2, 7.5, 8.2, 9.0, 10, 11, 12, 15, 19, 23, 27, 36, 40, 47, 56 5% 1.6nH to 390nH 1.6, 1.8, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.8, 7.5, 8.2, 8.7, 9.5, 10, 11, 12, 15, 16, 18, 22, 24, 27, 30, 33, 36, 39, 43, 47, 56, 68, 72, 82, 100, 110, 120, 150, 180, 220, 270, 330, 390 5% $140.00 2.8nH to 2700nH 2.8, 3.0, 3.3, 5.6, 6.8, 7.5, 8.2, 10, 12, 15, 18, 22, 24, 27, 33, 36, 39, 43, 47, 56, 68, 82, 91, 100, 110, 120, 150, 180, 220, 240, 270, 330, 390, 470, 560, 620, 680, 750, 820, 1000, 1200, 1500, 1800, 2200, 2700 5% $140.00 10nH to 15,000nH 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82, 100, 120, 150, 180, 220, 270, 330, 390, 470, 560, 620, 680, 750, 820, 910, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600, 6800, 8200, 10,000, 12,000, 15,000 5% $140.00 0402 WL Chip Inductors 0603 WL Chip Inductors 0805 WL Chip Inductors 45 different values, 15 pieces per value 1008 WL Chip Inductors 42 different values, 15 pieces per value A M E R I C A N 8 ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L . a t c e r a m i c $140.00 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w Price s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m CONTACT INFORMATION ATC NORTH AMERICA AMERICAN TECHNICAL CERAMICS One Norden Lane, Huntington Station, NY 11746-2142 Phone: +1-631-622-4700 * Fax: +1-631-622-4748 email: sales@atceramics.com * website: www.atceramics.com ATC EUROPE For technical support in your region, please contact the local office in Germany or the UK. For sales orders and all other transactions in Europe, Africa and the Middle East, please contact the ATC Sales, Applications Support and Distribution Center in Stockholm, Sweden. SALES, APPLICATIONS SUPPORT & DISTRIBUTION CENTER Serving Europe, Africa and the Middle East AMERICAN TECHNICAL CERAMICS AB Forradsvagen 18 SE-141 46 Huddinge, Sweden Phone: +46 8 6800410 * Fax: +46 8 6800415 (main) * Mobile: +46 8 12131270 email: sales@atceramics-europe.com * website: www.atceramics-europe.com ATC EUROPE - REGIONAL SATELLITE OFFICE, GERMANY AMERICAN TECHNICAL CERAMICS AB Forradsvagen 18 SE-141 46 Huddinge, Sweden Phone: +46 8 6800410 * Fax: +46 8 6800415 (main) * Mobile: +46 8 12131270 email: sales@atceramics-europe.com * website: www.atceramics-europe.com ATC EUROPE - REGIONAL SATELLITE OFFICE, RUSSIA AMERICAN TECHNICAL CERAMICS Forradsvagen 18 SE-141 46 Huddinge, Sweden Phone: +46 8 6800410 * Fax: +46 8 6800415 (main) * Mobile: +46 8 12131270 email: sales@atceramics-europe.com * website: www.atceramics-europe.com ATC EUROPE - REGIONAL SATELLITE OFFICE, UK AMERICAN TECHNICAL CERAMICS 34 Pewley Way Guildford, Surrey, England, GU1 3QA Phone: +44 1483207402 * Fax: +46 8 6800415 * Mobile: +44 8817221903 email: mchapman@atceramics-europe.com * website: www.atceramics-europe.com ATC ASIA / INDIA SALES AND TECHNICAL SUPPORT OFFICE AMERICAN TECHNICAL CERAMICS (CHINA) LIMITED Unit D & E, 11/F JunYun Century Building, No. 6033 Chegongmiao, Shennan Road, Futian Dist. Shenzhen, Guangdong Province, 518031 P. R. China Phone: +86 755 2396 8759 * Fax: +86 755 2396 8442 e-mail: sales@atceramics-asia.com * website: www.atceramics-asia.com Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 2001 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-960 Rev. O; 5/13 A M E R I C A N ATC North America +1-631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m Other ATC Product Catalogs Multilayer Capacitors & Power Assemblies Custom Thin Film Products Inductor Products High Power Resistive Products Single Layer Capacitors