ACD-15 TRMS-PRO - Amprobe - Datasheet.Live

www.Amprobe.com

Amprobe® Test Tools

Data Sheet

No hassle

warranty

No waiting.

No shipping

charges.

Our commitment to

high-quality products

and customer service

is demonstrated by

our industry exclusive

“No Hassle” warranty.

In the unlikely event

that an Amprobe Test

Tool requires warranty

service, any of our

local dealers are

authorized to replace

it, on the spot.

(note: $500 MSLP limit)

ACD-15 TRMS-PRO

2000A Clamp-on Multimeter

Wide range of measuring features built into one, professional

meter. The TRMS version with backlight display, improves

performance and reliability.

True RMS

■

Backlight ■

Measurements: AC/DC Voltage ■

up to 600V, AC Current up to

2000A Resistance, Frequency

and Capacitance

Non-contact Voltage Level ■

Detection

Audible continuity ■

Auto-check feature ■

automatically selects DCV,

ACV or Resistance (W)

Auto power off

■

Low battery indication ■

Data hold ■

Large, easy to read LCD display ■

Accommodates conductors up to ■

45mm (1.77”) in diameter

Carrying case, test leads, batteries ■

(installed) and manual included

Voltage overload protection for all ■

functions up to 600V AC/DC

600V

Amprobe® Test Tools www.Amprobe.com

Data Sheet

ACD-15 TRMS-PRO 2000A Digital Clamp-on Multimeters

DC Voltage

6.000V 0.5% + 3d

60.00V 1.0% + 5d

600.0V 2.0% + 5d

NMRR : >30dB @ 50/60Hz

CMRR : >100dB @ DC, 50/60Hz, Rs=1kW

Hi-Z DCV Input Impedance: 5MW, 90pF nominal

AutoCheck™ Lo-Z DCV input impedance: Initially 1.6kW, 90pF nominal; Impedance increases signiﬁcantly as display voltage

increases from 50V (typical). Typical impedances vs display voltages for reference are:

15kW @ 100V; 100kW @ 300V; 210kW @ 600V

AutoCheck™ DCV Threshold: > +1.5VDC or < -1.0VDC nominal

AC Voltage

50Hz / 60Hz 6.000V, 60.00V 1.5% + 5d

600.0V 2.0% + 5d

50Hz ~ 500Hz 6.000V, 60.00V 2.0% + 5d

600.0V 2.5% + 5d

CMRR: >60dB @ DC to 60Hz, Rs=1kW

Hi-Z ACV Input Impedance: 5MW, 90pF nominal

AutoCheck™ Lo-Z ACV input impedance: Initially 1.6kW, 90pF nominal; Impedance increases signiﬁcantly as display voltage

increases from 50V (typical). Typical impedances vs display voltages for reference are:

5kW @ 100V; 100kW @ 300V; 210kW @ 600V

AutoCheck™ ACV Threshold: > 2VAC (50/60Hz) nominal. True RMS model ACD-15 TRMS-PRO Crest < 1.6 : 1 at full scale

& < 3.3 : 1 at half scale

Resistance

6.000kW 2) 1.2% + 6d 1) 3)

60.00kW, 600.0kW 1.0% + 4d

6.000MW 2.0% + 4d

Open Circuit Voltage: 0.4VDC typical 1) Cool down interval 2 minutes after over 50V measurements in Auto-VW position

2) Beeper on while reading < 0.025kW

3) Add 40d to speciﬁed accuracy while reading is

600W with Continuity Beeper 600.0W 2.0%+8d 1)

Continuity Beeper Response: < 100µs

Open Circuit Voltage: 0.4VDC typical

Audible Threshold: between 10W and 300W 1) Add 40d to speciﬁed accuracy while reading is below

20% of range

Frequency

Range Sensitivity (Sine RMS) Voltage Range

10Hz ~ 30kHz 4V 6.000V

0Hz ~ 1kHz 30V 1 60.00V

10Hz ~ 1kHz 60V 600.0V

Accuracy: 0.5%+4d

Max display: 9999 counts

Electrical Speciﬁcations

Accuracy is ±(% reading digits + number of digits) or otherwise speciﬁed, at 23℃ ±5℃ & less than 75% R.H. True RMS Model ACD-15

TRMS-PRO ACV & ACA clamp-on accuracies are speciﬁed from 5% to 100% of range or otherwise speciﬁed. Maximum Crest Factor are as

speciﬁed below, and with frequency spectrums, besides fundamentals, fall within the meter speciﬁed AC bandwidth for non-sinusoidal

waveforms.

Function Range Accuracy

www.Amprobe.com

Data Sheet

ACD-15 TRMS-PRO 2000A Digital Clamp-on Multimeters

Diode Tester

Open Circuit Voltage Test Current

< 1.6 VDC 0.4mA (typical)

Audible Threshold: between 0.015V & 0.080V

Capacitance

100.0nF 2), 1000nF, 3.5%+5d 1) 3)

10.00µF, 100.0µF, 2000µF

1) Accuracies with ﬁlm capacitor or better

2) Accuracy below 50nF is not speciﬁed

3) Speciﬁed with battery voltage above 2.8V (approxmately half full battery). Accuracy decreases gradually to 12% at low

battery warning voltage of approximately 2.4V

Non-Contact EF-Detection

Typical Voltage Bar Graph Indication

15V TO 85V -

40V TO 130V - -

60V TO 210V - - -

90V TO 300V - - - -

ABOVE 120V - - - - -

Indication: Bar graph segments & audible beep tones proportional to the ﬁeld strength

Detection Frequency: 50/60Hz

Detection Antenna: Top side of the stationary jaw

Probe-Contact EF-Detection: For more precise indication of live wires, use the Red (+) probe for direct contact measurements

AC Current (Clamp-on)

50Hz / 60Hz 400.0A, 2000A 1.5% + 5d 1) 2) 3)

True RMS model ACD-15 TRMS PRO Crest Factor: < 2.0 : 1 at full scale & < 4.0 : 1 at half scale

1) Add 8d to speciﬁed accuracy while reading is below 10% of range

2) Induced error from adjacent current-carrying conductor: < 0.06A/A

3) Speciﬁed accuracy is for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position er-

rors introduced are: Add 1% to speciﬁed accuracy for measurements made within jaw marking lines (away from jaw opening) Add 4%

to speciﬁed accuracy for measurements made beyond jaw marking lines (toward jaws opening)

Function Range Accuracy

www.Amprobe.comwww.Amprobe.com

Amprobe® Test Tools

Data Sheet

Amprobe® Test Tools

website: www.Amprobe.com

email: info@amprobe.com

Everett, WA 98203

Tel: 877-AMPROBE

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

Included Accessories

Test leads, carrying case and users manual

Optional Accessories

ELS2A Line splitter (Energizer)

ACF-3000AK 3000A AC Flexible Clamp-On Attachment

TMA-K Temperature Adapter

TL36A Industry Test Leads with Threaded Alligator Clips

ACD-15 TRMS-PRO 2000A Digital Clamp-on Multimeters

9/2007 3128821 Rev A

General Specifications

Display: 3-5/6 digits 6000 counts LCD display

Update Rate: 5 per second nominal

Polarity: Automatic

Low Battery: Below approx. 2.4V

Operating Temperature: 0°C to 40°C

Relative Humidity: Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50%

relative humidity at 40°C

Altitude: Operating below 2000m

Storage Temperature: -20℃ to 60℃, < 80% R.H. (with battery removed)

Temperature Coefﬁcient: nominal 0.15 x (speciﬁed accuracy)/℃ @(0℃ -18℃ or 28℃ -40℃), or otherwise speciﬁed

Sensing: Average sensing

Safety: Meets EN61010-1:2001; IEC61010-2-032(1994), EN61010-2-032(1995), UL3111-2-032(1999).

Category III 600 Volts AC & DC

Transient Protection: 6.5kV (1.2/50µs surge) for all models

Pollution Degree: 2

E.M.C.: Meets EN61326-1

In an RF ﬁeld of 3V/m: Capacitance function is not speciﬁed. Total Accuracy = Speciﬁed Accuracy + 45 digits

Performance above 3V/m is not speciﬁed

Overload Protections: ACA Clamp-on jaws: AC 2000A rms continuous + & COM terminals (all functions):

600VDC/VAC RMS

Power Supply: standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2

Power Consumption: 2.8mA typical

APO Timing: Idle for 3 minutes

APO Consumption: 40µA typical on all model functions voltage & current functions

Dimension: L224mm X W78mm X H40mm

Weight: 220 gm approx

Jaw opening & Conductor Diameter: 45mm max