P5500 Series Hydraulic and pneumatic comparison test pumps, media separators and accessories Technical Data Hydraulic comparison test pumps The Fluke Calibration Series of hydraulic test pumps are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These cost effective instruments, which include several features from our popular line of hydraulic deadweight testers, are capable of easily generating high pressures and provide precise control for important calibration requirements. Model P5515 Model P5514 * Built-in pump for large volume applications and system priming * High quality screw press for fine pressure control * Acrylic reservoir for visibility of fluid level and quality * Test port adapters which require no PTFE tape or wrenches * Built-in drain plug for removal of old fluid * Sturdy carrying case with lid * Operational with a wide range of fluids * Bench mount design * Screw press for fine pressure adjustments * Test connections can be made without the need for PTFE tape or wrenches * Operates with a wide range of fluids The standard O-ring seals are Viton. Ethylene Propylene seals are available for use with certain aggressive fluids. Model O-ring Model O-ring P5515-140M Viton P5514-70M Viton P5515-140M-EP Ethylene Propylene P5514-70M-EP Ethylene Propylene Hydraulic comparison test pumps Pressure range Test port adapters Weight Dimensions (W x D x H) Model P5515 Model P5514 0 psi to 20 000 psi (1 400 bar) 0 psi to 10 000 psi (700 bar) M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter) M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter) 16 kg (36 lb) 5 kg (11 lb) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) 279.4 mm x 279.4 mm x 254 mm (11 in x 11 in x 10 in) Reservoir volume 150 cm3 (9.2 in3) 75 cm3 (4.6 in3) Screw press displacement 5.5 cm3 (0.34 in3) 20 cm3 (1.2 in3) Priming Pump displacement 4.7 cm3 (0.293 in) per stroke Pneumatic comparison test pumps These pneumatic comparison test pumps are designed for testing pressure measuring instruments against master test instruments. These cost effective instruments provide precise control for important calibration requirements and include many features found in our popular line of pneumatic deadweight testers. Model P5510 Model P5513 * Dual pressure/ vacuum capability * Bench mount design * Built-in handpump as pressure/vacuum source * High quality needle valve for fine control * Test port adapters which require no PTFE tape or wrenches * High pressure pneumatic operation * Screw press for fine pressure adjustments * High quality needle valves for fine control * Test port adapters which require no PTFE tape or wrenches * Sturdy carrying case with lid Note: P5513 requires a pressure source, such as a nitrogen bottle, for operation. Pneumatic comparison test pumps Pressure range Vacuum range Test port adapters Weight Dimensions (W x D x H) Model P5510-2M Model P5513-20M 0 psi to 300 psi (20 bar) 0 psi to 3 000 psi (210 bar) 0 in to 24 in Hg (800 mbar) M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter) M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter) 3.5 kg (7.5 lb) 8 kg (17 lb) 240 mm x 330 mm x 180 mm (9.5 in x 13 in x 7 in) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) Gas supply connection 2 Fluke Calibration 1/4 NPT female P5500 Series Hydraulic and pneumatic comparison test pumps, media separators and accessories Media separators Liquid/liquid and liquid/gas media separators are provided as a barrier between the deadweight tester operating fluid and that of the device under test. Dirt/moisture traps Liquid to liquid Dirt/moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected particle contamination or fluid inside the device under test will be prevented from entering the deadweight system, avoiding downtime for maintenance or repair. Designed for operation in the vertical position these traps are simple to dismantle and easy to clean. Model P5521/5522 These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump. A flexible diaphragm separates the fluids, protecting the calibrator from contamination and allows calibration of the device in its specific working fluid. Liquid to gas interface Model P5531 Designed to mount directly on the deadweight tester and featuring an acrylic chamber for visibility of contaminates this unit utilizes the standard test port adapters for easy instrument connections. Model P5523 For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to gas separation. Driven by a pneumatic pressure source (nitrogen bottle) and controlled by needle valves, high pressure gas is balanced against the liquid in a hydraulic deadweight tester through a series of fluid traps. Note: since fluid mist may be transferred during operation we do not recommend this device for oxygen- safe instruments using an oil operated deadweight tester. Media separators/interfaces Pressure range Test port adapters Weight Dimensions Calibrator connection Liquid to liquid Model P5521/5522 Liquid to gas Model P5523 Model P5521: 0 psi to 10 000 psi (700 bar) Model P5522: 0 psi to 7 000 psi (480 bar) for Skydrol and other aggressive fluids 0 psi to 3 000 psi (210 bar) Uses adapters supplied with calibrator Uses adapters supplied with calibrator 3.5 kg (7.5 lb) 11 kg (24 lb) (W x H) 100 mm x 150 mm (4 in x 6 in) (W x D x H) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) 3/8 BSP male (mating adapter supplied) Gas supply connection Body material Diaphragm Reservoir material 3 Fluke Calibration 1/4 NPT female Aluminum bronze 5521- Viton(R) 5522-Ethylene Propylene Hard-anodized aluminum Model P5532 This high pressure version is provided with an aluminum central chamber for safety and utilizes the standard test port adapters. Dirt/moisture traps Model P5531 Model P5532 Pressure range 0 psi to 500 psi (35 bar) 0 psi to 3 000 psi (210 bar) Body material Stainless steel Stainless steel Chamber material Acrylic Aluminum O-Rings Nitrile Nitrile Test port connection As supplied with calibrator As supplied with calibrator Deadweight connection 3/8 in BSP male (mating adapter supplied) 3/8 in BSP male (mating adapter supplied) P5500 Series Hydraulic and pneumatic comparison test pumps, media separators and accessories Accessories P5544-STD Two gauge stand This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time or the connection of a reference test instrument. Maximum working pressure is 10 000 psi (700 bar). Adapter sets P5540 Metric: M14 x 1.5, M20 x 1.5, 1/8 in and 1/4 in BSP P5541 BSP: 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP P5542 NPT: 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT PK-P3000-ADPTR-SD: M14 x 1.5, M20 x 1.5, 1/8, 14/, 3/8, and 1/2 in BSP and NPT Model P5543 Angle adapter Fluke Calibration. Precision, performance, confidence.TM To calibrate gauges with the pressure connection on the rear (e.g. panel mount gauges) In their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90. The maximum working pressure of this Unit is 10 000 psi (700 bar). Model P5551 Pointer remover/punch This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge. Accessories Body material O-Rings Test port adapters Calibrator connection Model 5544 Model 5543 Brass and stainless steel Stainless steel Nitrile Nitrile M14 x 1.5, M20 x 1.5, 1/8, 14/, 3/8, and 1/2 in BSP and NPT As supplied with calibrator 1/2 in BSP male (mating adapter supplied) 3/8 in BSP male (mating adapter supplied) Fluke Calibration PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (877) 355-3225 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.flukecal.com (c)2010-2012 Fluke Calibration. Specifications subject to change without notice. Printed in U.S.A. 8/2012 3833524B D-EN-N 4 Fluke Calibration P5500 Series Hydraulic and pneumatic comparison test pumps, media separators and accessories Modification of this document is not permitted without written permission from Fluke Calibration.