G057VTN01.1 Preliminary Specification Final Specification 5.7 Inch Color TFT-LCD Model Name G057VTN01.1 Customer Checked & Approved by $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Module Date Approved by Date Grace Hung 2014/8/5 014/8/5 4/8 Prepared by Mask Tsai ai Note: This Specification is subject to change without notice. 2014/8/5 General all Disp Displa Display Business Division / AU Optronics oration ration corporation G057VTN01.1 Ver. 1. 1/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 Contents 1. Operating Precautions ........................................................... 4 2. General Description ............................................................... 5 2.1 Display Characteristics .................................................................................................................. 5 2.2 Optical Characteristics................................................................................................................... 6 3. Functional Block Diagram ...................................................... 9 4. Absolute Maximum Ratings.................................................. 10 $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q 4.1 Absolute Ratings.......................................................................................................................... 10 4.2 Absolute Ratings of Environment ................................................................................................ 10 5. Electrical Characteristics ..................................................... 11 5.1 TFT-LCD Driving .........................................................................................................................11 111 5.2 Backlight Unit Driving ................................................................................................................... 12 6. Signal Characteristic............................................................ .. 13 6.1 Pixel Format Image...................................................................................................................... .......... ........ 13 1 6.2 Scanning Direction ...................................................................................................................... 13 ......... ............ 6.3 The Input Data Format................................................................................................................. 14 ........... 6.4 TFT- LCD Interface Signal Description ....................................................................................... 15 ........... ....... 6.5 TFT- LCD Interface Timing ......................................................................................................... 16 ........... ....... 6.6 LED Backlight Unit Interface Signal Description ........................................................................ 17 ........... .... 6.7 Power ON/OFF Sequence ............................................................................................................ 17 ......... ........... 7. Connector & Pin Assignment................................................ ........ ..... 18 7.1 TFT- LCD Signal (CN1): LCD Connector ................................................................................... ............ ....... 18 7.2 LED Backlight Unit (CN2): Backlight Connector ........................................................................ 18 ............ ....... 7.3 LED Light Bar Input (CN3): Light Bar Connector ....................................................................... 19 ............ ........ 8. Reliability Test Criteria ........................................................ ..... ....... 20 ...... ....... 9. Mechanical Characteristics .................................................. 21 10. Label and Packaging .......................................................... 22 ...... ....... 10.1 Shipping Label (on the rear side of TFT-LCD display)............................................................... ay)........ y)...... 22 10.2 Carton Package.......................................................................................................................... 22 ............ ....... 11 Safety................................................................................. ........ ..... 23 11.1 Keen Edge Requirements ........................................................................................................... ............ ........ 23 11.2 Materials.................................................................................................................................... 23 ........... ........ 11.3 Capacitors.................................................................................................................................. 23 ............ ....... 11.4 National Test Lab Requirement .................................................................................................. 23 .......... ............ G057VTN01.1 Ver. 1. 2/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 Record of Revision Revise Date Page 1.0 2014/8/5 - Old description First draft of final specification. $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Version G057VTN01.1 Ver. 1. 3/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 1. Operating Precautions $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q 1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not to scratch it. 2) Be sure to power off your machine before connecting or disconnecting your signal cable to TFT-LCD Module. 3) Wipe off water drop on display area immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard ard object. 6) To avoid ESD (Electro Static Discharge) damage, be sure to ground yourself before handling andling ndlin TFT-LCD Module. 7) Do not open nor modify the TFT-LCD module assembly. 8) Do not press the reflector sheet at the back of the module to any direction. 9) In case if TFT-LCD module has to be put back into the packing container slot after fter ter it was w taken out from the container, do not press the center of the LED Reflector edge. Instead, at the stead, ea press p far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may ayy be damaged. d 10) When inserting or removing of your signal cable to TFT-LCD Module, be sure ssu not to apply abnormal force (rotate, tilt...etc.) to the Connector of the TFT-LCD Module. ule. e. 11) TFT-LCD Module is not allowed to be twisted & bent even force is added dded on module in a very short time. Please design your display product well to avoid external al force forc applying to module by end-user directly. 12) Small amount of materials without flammability grade are used sed d in tthe TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power rre Source (IEC60950 or UL1950), or be applied exemption. 13) Severe temperature condition may result in different luminance, inance nanc response time. 14) Continuous operating TFT-LCD Module under high tempe temperature environment may accelerate temp LED light bar exhaustion and reduce luminance dramatically. matic matica 15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape position. 16) Continuous displaying fixed pattern may induce uce image ima sticking. It's recommended to use screen im saver or moving content periodically if fixed d pattern patte patter is displayed on the screen. G057VTN01.1 Ver. 1. 4/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 2. General Description G057VTN01.1 is designed for industrial display applications with VGA (640 x RGB x 480) resolution and 262k colors (Digital 6-bits Parallel RGB interface). It is composed of a TFT-LCD panel, driver ICs, control and power supply circuits board and backlight unit including LED driver circuit. 2.1 Display Characteristics The following items are G057VTN01.1 characteristics summary at 25 (Room Temperature). Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode Nominal Input Voltage VDD Typical Power Consumption Weight Physical Size Electrical Interface Surface Treatment Support Color The most suitable view angle Temperature Range Operating Storage (Non-Operating) RoHS Compliance Unit Specifications inch 5.7 mm 115.2(H) x 86.4(V) dots 640 x 3(RGB) x 480 mm 0.18 x 0.18 $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Items R.G.B. Vertical Stripe TN, Normally White Volt 3.3 typ. Watt 2.54W (LCD:0.5W/LED BLU: U:: 2.04W) 2.04W @ All black pattern, Full Load oad ad and VLED=12V Grams mm 150g (typ.), 165g (max.)) 144.0(H)x 104.6(V) x 12.3(D) 12.3(D (typ.) 12.3 Digital 6-bit Parallel lel el RGB RG Anti-Glare, Hardness ardness dnes 3H 262K colors rs s 12 o'clock clock lock o o -30 30 to +85 +8 + -30 to +85 + RoHS Ro RoH Compliance C C G057VTN01.1 Ver. 1. 5/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 (Room Temperature). Item Unit White Luminance cd/m2 Uniformity Conditions VLED =12V, DPWM =100% (center point) 5 Points % Contrast Ratio Viewing Angle Color / Chromaticity Coordinates (CIE 1931) Color Gamut Max. Remark 440 550 - Note 1 75 - - 500 800 - msec Rising - 15 20 msec Falling - 10 15 msec Rising + Falling - 25 35 degree degree Horizontal CR = 10 (Right) (Left) 70 80 - 70 80 - degree degree Vertical CR = 10 (Upper) (Lower) 60 70 - 60 70 - White x 0.263 0.313 0.363 3 White y 0.279 0.329 0.379 .379 379 Red x 0.499 0.549 0.599 0.59 Red y 0.264 0.314 0.364 0 0.3 Green x 0.279 0.329 29 9 0.379 Green y 0.548 0.598 598 0.648 Blue x 0.106 0.15 0.156 0.206 Blue y 0.068 0.118 0 0.1 0.168 - 50 - % Note 1: Measurement method Typ. Note 1, 2, 3 Note 4 Note 5 $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Response Time Min. Note ote 6 Equipment Pattern Generator, Power Supply, Digital Voltmeter, meter (SR_3 or equivalent) eter, ter, Luminance Lum L Aperture 1with 50cm viewing distance Test Point Center Environment < 1 lux LCD Module SR_3 or equivalent measuring easuring asur distance Module odule Dr Driving Equipment G057VTN01.1 Ver. 1. 6/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H)) W W /4 W /4 W /4 W /4 H /4 2 1 H /4 3 H /4 $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q H 4 H /4 5 Note 3: aximum ximum luminance The luminance uniformity of 5 points is defined by dividing the minimum luminance value by the maximum value at full white condition. Note 4: Definition of contrast ratio (CR): Brightness @ "White" state Contrast ratio (CR) = Note 5: Definition of response time: Brightness @ "Black" state The output signals of photo detector are measured when the input signalss are cch changed from "White" to "Black" (falling time) and from "Black" to "White" (rising time), respectively. The response definition is between 10% and 90% e time interval in of amplitude. Please refer to the figure as below. % 100 90 Optical Tf White response 10 0 Tr Black White G057VTN01.1 Ver. 1. 7/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 Note 6: Definition of viewing angle Viewing angle is the measurement of contrast ratio 10, at the screen center, over 180 horizontal and 180 vertical $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q range. The 180 horizontal L, R) and 180 vertical H, L) range are illustrated as following figure. G057VTN01.1 Ver. 1. 8/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 3. Functional Block Diagram $ 8V H2 QO\ 2 Q The following diagram shows the functional block of the G057VTN01.1 color TFT/LCD module. G057VTN01.1 Ver. 1. 9/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 4. Absolute Maximum Ratings 4.1 Absolute Ratings Item Symbol Min Max Unit Remark Logic/LCD Drive Voltage VDD - 0.3 + 5.0 Volt Ta= 25 C LCD Input Signal Voltage VIN - 0.3 + 5.0 Volt Ta= 25 C LED BLU Drive Voltage VLED 0 23 Volt Ta= 25 C LED On/Off Control Voltage VLED On/Off 0 20 Volt Ta= 25 C VPWM 0 8 Volt Ta= 25 C Symbol Min Max Unit Remark ark TOP -30 +85 Note 1, 1 2 TST -30 +85 Note No 1 Not Hi h o o o $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q LED Dimming Input Voltage o o 4.2 Absolute Ratings of Environment Item Operating Temperature Storage Temperature Note 1: Maximum Wet-Bulb should be 39 and no condensation. Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25 5 on only. only G057VTN01.1 Ver. 1. 10/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 5. Electrical Characteristics 5.1 TFT-LCD Driving 5.1.1 Power Specification Symbol Parameter Logic/LCD Drive Voltage IDD VDD Current PDD VDD Power Typ Max Units 3.0 3.3 3.6 Volt - 150 165 mA Remark All Black Pattern (VDD=3.3V, at 60Hz) $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q VDD Min - 0.5 0.55 Watt - - 100 mVp-p All Black Pattern (VDD=3.3V, at 60Hz)) All Black Pattern VDDrp Allowable Logic/LCD Drive Ripple Voltage (VDD=3.3V, at 60Hz) 3.3V 90% 10% 0V 0.5ms VDD rising time 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Parameter Symbol Min. Typ. Max. M Unit Logic Input Voltage for High VIH 0.7VDD - VDD Volt Display Signals Low VIL 0 - 0.3VDD Volt High VIH 0.7VDD D - VDD Volt Low VIL 0 - 0.3VDD Volt Input Voltage for RL/UD Remarks G057VTN01.1 Ver. 1. 11/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 5.2 Backlight Unit Driving 5.2.1 Parameter guideline for LED Following characteristics are measured under stable condition using a LED driving board at 25 (Room Temperature) Symbol Parameter Min Typ Max Units Remark VLED Input Voltage 9 12 20 Volt ILED Input Current - 0.17 0.2 A VLED =12V, DPWM =100% PLED Power Consumption - 2.04 2.45 Watt VLED =12V, DPWM =100% 2.0 3.3 5.0 Volt Dimming control Voltage High $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q VPWM DIM Dimming control Voltage Low - - 0.2 Volt Note 1,2 FPWM Dimming Frequency 200 30K Hz DPWM Dimming duty cycle 1 100 % On Control Voltage 2 3.3 5.5 Volt Off Control Voltage - - 0.8 Volt VLED On/Off IF LED Forward Current VF LED Forward Voltage PLED Operating Life LED Power 50 mA Note 3, 4 Ta = 25oC oC - - - - IF = 50mA, 0 Ta = -30oC - 32 36 Volt IF = 50mA, 50m Ta = 25oC 5 - - - - IF = 50mA, Ta = 85oC - 1.6 1.8 Watt 50000 - - Hrs Hr Note 5, 6 Note 1: PWM dimming function can be operated by PWM signal. PWM duty cycle can adjust a adj white Luminance. (PWM High: ON and PWM Low: OFF) Note 2: PWM signal can not be floating and pull-down to ground when waiting. ng. Signa Note 3: Enable (VLED On/Off) must be turned on late than VLED and PWM Signal. WM Signal. Sign S Note 4: Enable (VLED On/Off) must be turned off early than VLED and PWM Note 5: If G057VTN01.1 module is driven by high current or at high ambient temperature & humidity condition. The am a operating life will be reduced. Note 6: Operating life means brightness goes down to 50% initia brightness. Minimum operating life time is estimated initial b data. Note 7: See Section 6.6 for LED Backlight Unit Interface e Signal Signa Description G057VTN01.1 Ver. 1. 12/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 6. Signal Characteristic 6.1 Pixel Format Image 6.2 Scanning Direction $8 2 &R QI LG HQ WLD O) RU 35 20 $7 ( , QW HU QD O8 VH 2 QO\ 2 Q Following figure shows the relationship between input signal and LCD pixel format. The following figures show the image seen from the front view. The arrow indicates tes es the direction d of scan. Note 1: TFT-L TFT-LCD FTinterface signal description is shown in section 6.4. G057VTN01.1 Ver. 1. 13/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 6.3 The Input Data Format This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates $8 2 &R QI LG HQ WLD O ) RU 35 20 $7 ( , QW HU QD O8 VH 2 QO\ 2 Q the display of input data. G057VTN01.1 Ver. 1. 14/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q 6.4 TFT- LCD Interface Signal Description $ Note 1: "Low" stands for or 0V. "H "High" stands for 3.3V. "NC" stands for "No Connection". G057VTN01.1 Ver. 1. 15/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 6.5 TFT- LCD Interface Timing 6.5.1 Timing Characteristics DE mode only Signal Symbol Min. Typ. Max. Unit Remark 1/ TCLOCK 23.9 25.2 34.2 MHz Note1 Setup Time Tdsu 8 ns RL,GL,BL to Hold Time Tdhd 8 ns DCLK Setup Time Tesu 8 ns Period TH 770 Active THD Blanking THB 130 160 360 Period TV 516 525 570 Active TVD Blanking TVB Clock frequency (DOTCLK) DE Horizontal Section Vertical Section $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Data 800 1000 640 480 36 45 TCLOCK Note1 TLINE Note1 te1 e1 90 Note 1: Recommended frame rate is 60 Hz. 6.5.2 Input Timing Diagram Input Timing Definition ( DE Mo M Mode) TCLOCK DOTCLK Input Data Invaild Data DE THB Pixel 1 Pixel 2 Pixel 3 Pixel N-1 Pixel N Invaild Data Pixel 1 THD TH DE TVB TVD G057VTN01.1 Ver. 1. TV 16/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 6.6 LED Backlight Unit Interface Signal Description Symbol Pin Description 1 VLED 12V input 2 VLED 12V input 3 GND Ground 4 GND Ground 5 PWM DIM 1~100% PWM dimming 6 LED On/Off 0V-Off; 3.3~5V/NC-On $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Pin # Note 1: "NC" stands for "No Connection" 6.7 Power ON/OFF Sequence VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any ny system shall be Hi-Z state or low level when VDD is off. Power ON/OFF sequence timing timin ON/OFF sequence should be applied ed d to avoid avo abnormal function in the display. Please make sure to turn off the power when you plug the cable into the or pull the cable out of the connector. e input inpu connector c G057VTN01.1 Ver. 1. 17/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 7. Connector & Pin Assignment 7.1 TFT- LCD Signal (CN1): LCD Connector Manufacturer Starconn Connector Model Number 089H33-000100-G2-R Symbol Pin# Symbol Pin# Symbol 1 GND 12 GND 23 B3 2 DOTCLK 13 G0 24 B4 3 NC 14 G1 25 B5 4 NC 15 G2 26 GND 5 GND 16 G3 27 DE 6 R0 17 G4 28 VDD 7 R1 18 G5 29 VDD 8 R2 19 GND 30 R/L L 9 R3 20 B0 31 U/D 10 R4 21 B1 32 NC 11 R5 22 B2 33 GND G $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Pin# 7.2 LED Backlight Unit (CN2): Backlight Connector Manufacturer JST Connector Model Number SM06B-SRKS-G-TB -G-TB G-TB (HF) (H Mating Connecter Model Number JST SHR-06V-BKHF-B or compatible 06V-BKH 6V-BK Pin # Symbol Pin # Symbol 1 VLED 4 GND VLED 5 PWM DIM GND 6 LED ON/OFF 2 3 G057VTN01.1 Ver. 1. 18/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 7.3 LED Light Bar Input (CN3): Light Bar Connector Manufacturer JST Connector Model Number SM06B-SHLK-GTF(HF) Mating Connecter Model Number SM06B-SHLS-TF or compatible Symbol Pin Description Cable color 1 AN1 Channel 1 LED anode Red 2 AN2 3 AN3 4 CA1 5 CA2 6 CA3 $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q Pin # Channel 2 LED anode Red Channel 3 LED anode Red Channel 1 LED cathode White Channel 2 LED cathode Blue Channel 3 LED cathode Black G057VTN01.1 Ver. 1. 19/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 8. Reliability Test Criteria Items Temperature Humidity Bias Required Condition Remark 40/90%,300Hr Note 2 Note 2 Low Temperature Operation -30,300Hr Note 2 High Temperature Storage 85,300 hours Note 2 Low Temperature Storage -30,300 hours Note 2 Thermal Shock Test -20/30 min ,60/30 min ,100cycles Note 2 Hot Start Test 85/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Cold Start Test -30/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Shock Test (Non-Operating) 50G,20ms,Half-sine wave, (X, Y, Z) Note ote e2 Vibration Test (Non-Operating) Sine wave1.5G, 10~200~10Hz/Sine wave, 30mins/axis Not 2 Note $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q High Temperature Operation 85,300Hr Contact Discharge: 8KV, 150pF(330) 1sec, 8 points, 25 times/point ntt ESD Air Discharge: 15KV, 150pF(330) 1sec, 8 points, 25 times/pointt Attitude Test Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs Note 1,2 Note 2 Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation iss allowed. allowe allow TFT-LCD module is self-recoverable, no data lost and no hardware failures after test. Note2: z Water condensation is not allowed for each test items. z Each test is done by new TFT-LCD module. Don't use the same TFT-LCD repeatedly for reliability test. LCD module mo m z The reliability test is performed only to examine the TFT-LCD module ule capability. capa cap z To inspect TFT-LCD module after reliability test, please store itt at room roo temperature and room humidity for 24 hours at least in advance. G057VTN01.1 Ver. 1. 20/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q 21/23 G057VTN01.1 Ver. 1. )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q 9. Mechanical Characteristics G057VTN01.1 $8 2 & R Q LI G H Q WL D O ) R U 3 5 2 0 $ 7 ( , QW H UQ D O8 V H2 Q O \ 2 Q G057VTN01.1 1 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 10.2 Carton Package $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q G057VTN01.1 Max. capacity: 60 pieces TFT-LCD module per carton Max. weight: 12.95 kg per carton Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm Box stacked: Module by air(2 *3) *5 layersone pallet put pu 30 boxestotal 1800pcs module p 2 *3) **2 layers , two pallet put 42 boxestotal 2520pcs module Module by sea(2 *3) *5 layers + (2 Module by sea HQ(2 *3) *5 layers+(2 *3) *3 layers, two pallet put 48 boxes, total 2880pcs module ers+(2 rs+(2 *3 G057VTN01.1 Ver. 1. 22/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q G057VTN01.1 1 11 Safety 11.1 Keen Edge Requirements There will be no keen edges or corners on the display assembly that could cause injury. 11.2 Materials 11.2.1 Toxicity There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will 11.2.2 Flammability $8 2 &R QI LG HQ WLD O) RU 35 20 $7 (, QW HU QD O8 VH 2 QO\ 2 Q be reviewed and approved by the responsible AUO toxicologist. All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD FT-LCD Module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability lityy rating rati will be printed on the printed circuit board. 11.3 Capacitors If any polarized capacitors are used in the TFT-LCD module, provisions will be made e to keep kee k them from being inserted backwards. 11.4 National Test Lab Requirement The TFT-LCD Module will satisfy all requirements for compliance to UL 60950 6095 (U.S.A. Information Technology Equipment). G057VTN01.1 Ver. 1. 23/23 )RU3520$7(,QWHUQDO8VH2QO\3URYLGHG%\GDYLGFZKVLQJ2Q