POWER
NLP250CJ Enclosure
NLP250CJ
Cover Accessory Kit
NLP250CJ will fit the NLP250
power supplies.
MATERIALS
One (1) cover
Four (4) M3x8 mm countersunk
screws
Installation Instructions and Notes
1. Place the cover over the NLP250 as shown.
2. Align the cover to the U-bracket countersink holes.
3. Secure four (4) countersink screws provided with in kit as shown.
4. Overall dimensions: 7” (177.8 mm) x 4” (101.6 mm) x 1.6” (40.64 mm).
5. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are
complied with, in respect to creepage and clearance distances, and distances through
insulation.
6. All dimensions are in inches (mm)
Installation Notes
GAP PAD
ON MAIN
TRANSFORMER
M3 C'SINK SCREW
WITH 8mm LONG (4X)
NLP250CJ Enclosure Installation Notes
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks
and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are
trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject
to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal
terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
NLP250CJ Enclosure Installation Notes 31May2017
7.00
(177.8)
1.6
(40.64)
4
(101.6)
VR7
N
L
EJ1
1
JP1 J4 J2
J3
Mechanical Drawing
