ALUMINUM ELECTROLYTIC CAPACITORS GK HH 105C PC Board Mounting Type series (Through 100V only) Higher C/V products. Plentiful line-up from 35 x 63 to 40 x 100mm. Auxiliary terminals provided to assure anti-vibration performamance. Adapted to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new designs GK HH High C/V GU Specifications Item Performance Characteristics Category Temperature Range - 40 to +105C (16 to 250V) , - 25 to +105C (400V) Rated Voltage Range 16 to 400V Rated Capacitance Range 560 to 68000F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current I 3 CV (A) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (F) V : Voltage (V)] Measurement frequency : 120Hz, Temperature : 20C Tangent of loss angle (tan ) Rated voltage(V) tan (MAX.) 16 0.60 25 0.50 35 0.40 50 0.35 63 0.30 80 0.30 100 0.25 160 0.20 200 0.15 250 0.15 400 0.30 Measurement frequency : 120Hz 16 to 250 4 15 Rated voltage(V) Stability at Low Temperature Z- 25C/ Z+20C Z- 40C/ Z+20C Impedance ratio ZT/Z20 (MAX.) Endurance Shelf Life Marking 400 8 -- The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 2000 hours at 105C, the peak voltage shall not exceed the rated voltage. Capacitance change Within 20% of initial value tan 200% or less of initial specified value Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the requirements listed at right. Capacitance change Within 15% of initial value tan 150% or less of initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Type numbering system (Example : 200V 2700F) Drawing For all of 35mm products and for 63mmL or shorter with 40mm. 1 2 3 4 5 6 7 8 9 10 11 12 L GK 2 D 2 7 2 M EH D (PC board hole dimensions) Sleeve (P.E.T.) B 4- 2 C BLANK 0.1 D 30 30 +1MAX. A BLANK Case dia. code Configuration D Code Capacitance tolerance ( 20%) 35 C 40 D Rated Capacitance (2700F) Rated voltage (200V) Series name 22.5 0.1 L 2 Type Pressure relief vent 6.3 1 (PC board hole dimensions) Sleeve (P.E.T.) For 63mmL or longer with 40mm. C D BLANK D A BLANK Pressure relief vent L 2 Pressure relief vent 5- 2 0.1 30 +1MAX. D B BLANK L 2 5- 2 0.1 (PC board hole dimensions) 30 B BLANK C 25.0 0.1 A BLANK 30 30 30 30 +1MAX. Sleeve (P.E.T.) D BLANK 25.0 0.1 6.3 1 Notes: As blank terminals are not insulated from capacitor element, they shall be mounted on independent lands. 6.3 1 Frequency coefficient of rated ripple current Frequency (Hz) 016 to 100V Coeff. 160 to 250V 400V 50 0.88 0.85 0.88 60 0.90 0.88 0.90 120 1.00 1.00 1.00 1k 1.15 1.15 1.10 10k or more 1.15 1.20 1.15 Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100X ALUMINUM ELECTROLYTIC CAPACITORS GK HH series Dimensions 16V (1C) V(Code) Cod Cap.(F) e D 18000 183 22000 223 27000 273 33000 333 39000 393 47000 473 56000 563 68000 683 40 35 x 63 5.90 35 x 68 6.20 35 x 80 6.90 40 x 50 5.75 40 x 63 6.45 40 x 63 6.70 e D 5600 562 6800 682 8200 822 10000 103 12000 123 15000 153 e D 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 4700 472 40 35 x 63 5.60 35 x 68 6.00 35 x 80 6.80 40 x 50 5.50 40 x 63 6.30 40 x 63 6.60 35 40 35 x 63 5.10 35 x 68 5.50 35 x 80 6.25 40 x 50 5.00 40 x 63 5.80 40 x 63 6.05 80V (1K) 35 40 35 x 63 5.35 35 x 68 5.85 35 35 x 68 5.55 35 x 80 6.35 40 40 x 63 5.80 40 x 63 6.15 100V (2A) 35 40 35 x 63 4.75 35 x 80 5.45 40 x 50 4.65 40 x 63 5.00 35 35 x 68 4.40 35 x 80 4.80 40 40 x 63 4.55 40 x 63 4.65 40 x 50 5.25 40 x 63 6.10 160V (2C) V(Code) Cod Cap.(F) 35 63V (1J) V(Code) Cod Cap.(F) 50V (1H) 35V (1V) 25V (1E) 35 35 35 x 63 3.50 35 x 68 3.90 35 x 80 4.55 35 x 100 5.30 200V (2D) 40 40 x 50 3.45 40 x 63 4.10 40 x 63 4.40 40 x 80 5.20 40 x 100 6.15 35 35 x 63 3.30 35 x 80 3.90 35 x 100 4.65 250V (2E) 40 40 x 50 3.20 40 x 63 3.80 40 x 80 4.50 40 x 80 4.90 40 x 100 5.70 35 40 35 x 63 2.75 35 x 68 3.20 35 x 100 4.05 35 x 100 4.35 40 x 50 2.70 40 x 63 3.35 40 x 80 3.95 40 x 80 4.20 40 x 100 5.00 400V (2G) 35 40 35 x 63 40 x 50 1.75 1.70 35 x 80 40 x 63 2.05 2.00 35 x 80 2.20 35 x 100 40 x 80 2.65 2.60 40 x 100 3.00 Case size D x L (mm) Rated ripple Rated Ripple (Arms) at 105C 120Hz CAT.8100X