Case dia. code
they shall be mounted on independent lands.
ALUMINUM ELECTROLYTIC CAPACITORS
GKHH series
105°C PC Board Mounting Type
Higher C/V products.
Plentiful line-up from φ35 × 63 to φ40 × 100mm.
Auxiliary terminals provided to assure anti-vibration performamance.
Adapted to the RoHS directive (2002/95/EC).
Drawing
Specifications
Type numbering system (Example : 200V 2700
µ
F)
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem
–
40 to +105°C (16 to 250V) ,
–
25 to +105°C (400V)
16 to 400V
560 to 68000µF
I(µA) (After 5 minutes' application of rated voltage)
[C : Rated Capacitance (µF)V : Voltage (V)]
Printed with white color letter on black sleeve.
Measurement frequency : 120Hz, Temperature : 20°C
Measurement frequency : 120Hz
The specifications listed at right shall be met when the
capacitors are restored to 20
°C
after D.C. bias plus rated
ripple current is applied for 2000 hours at 105
°C
, the
peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for
1000 hours, and after performing voltage treatment based
on JIS C 5101-4 clause 4.1 at 20°C,
they will meet the requirements listed at right.
Rated voltage(V)
tan δ (MAX.) 16
0.60 25
0.50 35
0.40 50
0.35 63
0.30 80
0.30 100
0.25 160
0.20 200
0.15 250
0.15 400
0.30
Z
–
25°C/Z+20°C
Z
–
40°C/Z+20°C
Rated voltage(V)
Impedance ratio
ZT/Z20 (MAX.)
16 to 250
4
15
400
8
—
For all of φ35mm products and for 63mmL or shorter with
φ40mm.
For 63mmL or longer with φ40mm.
Frequency coefficient of rated ripple current
Dimension table in next page.
Frequency (Hz)
016 to 100V
160 to 250V
400V
Coeff.
50 60 120 1 k 10k or more
0.88 0.90 1.00 1.15 1.15
0.85 0.88 1.00 1.15 1.20
0.88 0.90 1.00 1.10 1.15
Capacitance change
Leakage current
tan δWithin ±20%of initial value
Less than or equal to the initial specified value
200%or less of initial specified value
Capacitance change
Leakage current
tan δWithin ±15%of initial value
Less than or equal to the initial specified value
150%or less of initial specified value