resistors CN concave termination with square corners resistor array EU features * * * * * Manufactured to type RK73 standards Less board space than individual chips Isolated resistor elements Marking: Marked with resistance value 1E, no marking Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC dimensions and construction p b W t a d Protective Coating Electrode C NEW L a Resistive Film Ceramic Substrate Inner Electrode Size Code L W C Dimensions inches (mm) d t a (top) a (bot.) p (ref.) b .039.004 .014.004 (1.00.1) .039.004 .008.004 .010.004 (0.350.1) .012.004 .012.006 .003.002 .079.004 (1.00.1) (0.20.1) (0.250.1) .018.004 (0.30.1) (0.30.1) (0.070.05) (2.00.1) (0.450.1) 1E2 1E4 1J2 .063.008 (1.60.2) 1J4 .126.008 .063.008 .012.008 .016.004 (3.20.2) (1.60.2) (0.30.2) (0.40.1) 1J8 .252.008 (6.40.2) 2A2 0.1.008 (2.540.2) 2A4 0.2.008 .079.008 .016.008 (5.080.2) (2.00.2) (0.40.2) 2A8 0.4.008 (10.160.2) 2B2 0.1.008 (2.540.2) 2B4 0.2.008 .126.008 .020.012 (5.080.2) (3.20.2) (0.50.3) 2B8 0.4.008 (10.160.2) .020.004 .016.006 (0.50.1) (0.40.15) .031 (0.8) .006.004 (0.150.1) .024.004 (0.60.1) .022.004 (0.550.1) .020 (0.5) .031.004 .030.006 (0.80.1) (0.750.15) .050 (1.27) ordering information New Part # CN 1J 4 Type Size Elements NEW 1E 1J 2A 2B For further information on packaging, please refer to Appendix A. 2 4 8 T Termination Material T: Sn (Other termination styles may be available, please contact factory for options) TD Packaging TE: 7" embossed plastic TD: 7" paper tape TED: 10" embossed plastic TDD: 10" paper tape 101 Nominal Resistance 2 significant figures + 1 multiplier for 2 & 5% 3 significant figures + 1 multiplier for 1% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 64 J Tolerance F: 1% G: 2% J: 5% 11/06/09 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com concave termination with square corners resistor array circuit schematic ........ R1 R2 Rn ........ R1 = R2 = . . . = Rn (n = 2, 4 or 8) applications and ratings Part Designation NEW CN1E2 CN1E4 CN1J2 CN1J4 CN1J8 CN2A2 CN2A4 CN2A8 CN2B2 CN2B4 CN2B8 Power Rating @ 70C (Per Element) T.C.R. (ppm/C) Max. E-24, E-96 (F:1%) E-24 (G:2%) E-24 (J:5%) Absolute Maximum Working Voltage --- --- 10 - 100k 25V 50V 10 - 1M 1 - 1M 50V 100V Resistance Range () 1/16W (.063W) 1/16W (.063W) 1/10W (.100W) 200: R10 400: R<10 10 - 1M 10 - 1M 10 - 1M --- 100V 200V 200V 400V 10 - 1M 10 - 1M 1/8W (.125W) Maximum Overload Voltage (5 Secs. Max.) --- Operating Temperature Range -55C to +125C environmental applications Surface Temperature Rise Derating Curve 100 60 Temperature Rise (C) % Rated Power 80 60 40 20 0 CN2B 50 CN2A 40 CN1J 30 20 10 0 20 40 60 80 100 120 140 70 125 Ambient Temperature (C) 160 0 0 1/32 1/16 1/10 1/8 (W) Power Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70C Low Temperature Operation High Temperature Exposure Requirement R Limit Typical Within specified -- tolerance Within specified -- T.C.R. 2.0% 0.5% 1.0% 0.25% 1.0% 0.5% 5.0% 1.0% 5.0% 0.5% 1.0% 0.2% 1.0% 0.2% Test Method 25C +25C/-55C, +25C/+125C Rated voltage x 2.5 for 5 seconds 260C 5C, 10 seconds 1 second -55C (30 minutes), +125C (30 minutes), 5 cycles 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle -55C, 1 hour +125C, 100 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/06/09 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 65 resistors CN