Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3781
Issue 3
2N3767SMD05
VCBO Collector– Base Voltage (IE= 0)
VCEO Collector– Emitter Voltage (IB= 0)
VEBO Emiiter– Base Voltage (IB= 0)
IBBase Current
ICCollector Current
TJ ,TSTG Operating and Storage Junction Temperature Range
PDTotal Device Dissipation @ TC= 25°C
Derate above 25°C
100V
80V
6V
2A
4A
–55 to +150°C
25W
5°C/W
MECHANICAL DATA
Dimensions in mm (inches)
SMD05 (TO-276AA)
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
PIN 1 – Base
Underside View
PIN 2 – Collector PIN 3 – Emitter
2
1 3
2.41 (0.095)
(0.030)
min.
3.05 (0.120)
5.72 (.225)
0.127 (0.005)
(0.296)
10.16 (0.400)
0.76
(0.030)
min.
3.175 (0.125)
Max.
0.50 (0.020)
max.
7.54
0.76
2.41 (0.095)
0.127 (0.005)
(0.286) 7.26
16 PLCS
0.50(0.020)
0.127 (0.005)
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
NPN BIPOLAR TRANSIST OR
IN A CERAMIC SURFA CE MOUNT
PA CKAGE FOR
HIGH REL APPLICATIONS
FEATURES
• HIGH VOLTAGE
• FAST SWITCHING
• CERAMIC SURFACE MOUNT PACKAGE
• SCREENING OPTIONS AVAILABLE
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Parameter Test Conditions Min. Typ. Max. Unit
IC= 100mA IB= 0
VCE = 100V VBE = 1.5V
VCE = 70V VBE = 1.5V
TA= 150°C
VEB = 6V IC= 0
VCE = 80V IB= 0
VCB = 100V IE= 0
IC= 50mA VCE = 5V
IC= 500mA VCE = 5V
IC= 1.0A VCE = 10V
IC= 1.0A IB= 0.1A
IC= 1.0A VCE = 10V
VCE = 10V IC= 500mA
f = 10MHz
VCB = 10V IC= 0A
f = 100KHz
VCE = 10V IC= 100mA
f = 1.0kHz
80 100
1.0
0.75
0.7
0.1
30
40 160
20 2.5
1.5
10
50
40
OFF CHARACTERISTICS
Document Number 3781
Issue 3
2N3767SMD05
ELECTRICAL CHARACTERISTICS (TC= 25°C unless otherwise stated)
1) Pulse test : Pulse Width < 100µs ,Duty Cycle <1%
2) ftis defined as the frequency at which |hfe| extrapolates to untity.
ON CHARACTERISTICS
TRANSIENT CHARACTERISTICS
V
µA
mA
—
V
MHz
pF
—
V(BR)CEO Collector Emitter Breakdown Voltage1
ICEX Collector Cutoff Current
IEBO Emitter Base Cutoff Current
ICEO Collector Emitter Cutoff Current
ICBO Collector Base Cutoff Current
hFE DC Current Gain
VCE(sat) Collector Emitter Saturation Voltage
VBE Base Emitter Voltage
fTTransistion Frequency
COB Common Base Output Capacitance
hfe Small Signal Current Gain
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
