66
77 DIN ISO 9654
77 12 115
DA
B
77 72 115
pointed mini-head,
with small bevel
77 Electronics Diagonal Cutters
Article-No.
9
EAN-
9
Style
9
Head
9
Handles
9
Dimensions
9
Cutting capacities
Length Code all pliers with BAD
mm 4003773- mm mm mm ø mm ø mm ø mm g
77 01 115 018568 polished plastic coated 14.0 11.0 7.5 0.3-1.6 1.2 0.5 70
130 018575 18.0 15.0 9.5 0.3-2.0 1.5 0.8 110
77 02 115 039334 mirror polished with two-colour 14.0 11.0 7.5 0.3-1.6 1.2 0.5 80
130 039341 dual component handles 18.0 15.0 9.5 0.3-2.0 1.5 0.8 125
77 11 115 018629 polished plastic coated 14.0 11.0 7.5 0.3-1.6 1.2 0.5 70
77 12 115 043768 mirror polished two-colour dual component handles 14.0 11.0 7.5 0.3-1.6 1.2 0.5 80
77 21 115 018650 mirror polished with two-colour 14.0 11.0 7.5 0.3-1.3 1.0 - 70
130 018667 dual component handles 18.0 15.0 9.5 0.3-1.6 1.3 - 115
77 22 115 043782 mirror polished with two-colour 14.0 11.0 7.5 0.3-1.3 1.0 - 85
130 040446 dual component handles 18.0 15.0 9.5 0.3-2.0 1.5 0.5 120
77 32 115 044307 mirror polished two-colour dual component handles 14.0 11.0 7.5 0.3-1.3 1.2 0.5 80
77 42 115 039761 mirror polished with two-colour 14.0 11.0 7.5 0.3-1.3 1.0 - 85
130 018773 dual component handles 18.0 15.0 9.5 0.3-1.6 1.3 - 125
77 52 115 040750 mirror polished two-colour dual component handles 14.0 11.0 7.5 0.3-1.0 0.8 0.5 80
77 72 115 040958 mirror polished two-colour dual component handles 10.5 9.5 6.5 0.3-0.8 - - 70
왘precision pliers for ultra fine
cutting work, e. g. in
electronics and fine mechanics
왘precision box joint
왘low-friction double spring for
gentle and even opening
왘the polish or mirror polish (only
finish 2) together with a fine
film of oil offer the best possible
rust protection - no circuit
faults caused by peeling
chrome from plated tools
왘cutting edges additionally
induction hardened, cutting
edge hardness approx. 62 HRC
왘special tool steel, oil-hardened
and tempered
Models 77 22 115, 77 42 115,
77 42 130 and 77 52 115:
왘cutting edges hardness
approx. 57 HRC
Models 77 21 115:
왘pointed head, without bevel
Models 77 21 130:
왘round head, without bevel
77 02 115
round head, with small bevel
77 12 115
round head, with bevel and lead
catcher - no uncontrolled loss of
cut wire ends
77 22 115
round head, without bevel
77 32 115
pointed head, with small bevel
77 42 115
pointed head, without bevel
77 52 115
pointed, flat head,
with small bevel
77 01 115
round head, with bevel
7
5
4
3
2
1
0
