77 77 Electronics Diagonal Cutters DIN ISO 9654 77 01 115 round head, with bevel 77 02 115 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics precision box joint low-friction double spring for gentle and even opening the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC special tool steel, oil-hardened and tempered Models 77 22 115, 77 42 115, 77 42 130 and 77 52 115: cutting edges hardness approx. 57 HRC round head, with small bevel Models 77 21 115: pointed head, without bevel 77 32 115 pointed head, with small bevel 77 42 115 pointed head, without bevel 77 52 115 pointed, flat head, with small bevel Models 77 21 130: round head, without bevel 77 12 115 round head, with bevel and lead catcher - no uncontrolled loss of cut wire ends 77 72 115 pointed mini-head, with small bevel D A B 77 12 115 77 22 115 round head, without bevel Article-No. 9 EAN- 9 Style Length Code mm 400377377 01 115 018568 130 018575 77 02 115 039334 130 039341 77 11 115 018629 77 12 115 043768 77 21 115 018650 130 018667 77 22 115 043782 130 040446 77 32 115 044307 77 42 115 039761 130 018773 77 52 115 040750 77 72 115 040958 66 9 Head 9 Handles all pliers with 0 1 2 polished plastic coated mirror polished with two-colour dual component handles plastic coated two-colour dual component handles with two-colour dual component handles with two-colour dual component handles two-colour dual component handles with two-colour dual component handles two-colour dual component handles two-colour dual component handles polished mirror polished mirror polished mirror polished 3 4 mirror polished mirror polished 5 7 mirror polished mirror polished 9 Dimensions B A mm 14.0 18.0 14.0 18.0 14.0 14.0 14.0 18.0 14.0 18.0 14.0 14.0 18.0 14.0 10.5 mm 11.0 15.0 11.0 15.0 11.0 11.0 11.0 15.0 11.0 15.0 11.0 11.0 15.0 11.0 9.5 9 Cutting capacities D mm 7.5 9.5 7.5 9.5 7.5 7.5 7.5 9.5 7.5 9.5 7.5 7.5 9.5 7.5 6.5 o mm 0.3-1.6 0.3-2.0 0.3-1.6 0.3-2.0 0.3-1.6 0.3-1.6 0.3-1.3 0.3-1.6 0.3-1.3 0.3-2.0 0.3-1.3 0.3-1.3 0.3-1.6 0.3-1.0 0.3-0.8 o mm 1.2 1.5 1.2 1.5 1.2 1.2 1.0 1.3 1.0 1.5 1.2 1.0 1.3 0.8 - o mm 0.5 0.8 0.5 0.8 0.5 0.5 0.5 0.5 0.5 - g 70 110 80 125 70 80 70 115 85 120 80 85 125 80 70