Product Update Harsh Environment USB MUSB CONNECTOR SERIES About Amphenol Commercial Products Amphenol's Commercial Connector Products are used in a variety of end user applications including Networking, Telecom, Server & Computer, Storage & HDD, Consumer Electronics and Entertainment, Professional Audio, Industrial & Military/Aerospace With matching USB Description The design of Amphenol Canada's harsh environment family of USB connectors represents a unique and innovative design. Our design provides the ideal solution for data transfer in harsh or demanding environments against physical and environmental conditions. This family of rugged USB are available in series A (single & stacked), series B, series mini-B and series mini AB, right angle and vertical PCB. Matching USB, cable headers, terminal blocks, all mounted on a PCB and dust covers are also additional options offered with the different USB series. These connectors meet IP67 in the mated and unmated conditions and also the Military shock and vibration levels. Applications MARKETS: With Cable Header With Terminal Block With PCB for wiring APPLICATIONS Industrial Medical Equipment GPS Systems - Agriculture & shipping containers Radiation Detector Test Equipment Microwave Transmitters Military Military Radio Military Vehicles Test Enclosures Automotive Mobile Entertainment Systems RELATED PRODUCTS Amphenol manufactures a line of rugged RJ45, rugged D-subs and rugged bulkhead adapters, all meeting IP67. Contact your local Amphenol representative for details. Electrical Properties Current Rating: 1.5 Amperes Contact Resistance: 30 milliohms maximum Insulation Resistance: 1000 Mega ohm DWV: 500 V AC @ sea level Environmental Properties Rohs Compliant Operating Temperature: -40C to +105C Thermal Shock: 5 cycles @ -40C to +125C Humidity: Per EIA 364-31 Condition C Method III Mechanical & Material Properties Shell: Nickel Plated Die-cast Zinc Alloy Housing: High Temperature Thermoplastic UL94V0, Black Contacts: Phosphor Bronze, 30u (0.76 microns) Gold over Nickel Physical Shock: Per EIA 364-27 Condition H (11 ms 30G) Vibration: Per EIA 364-28 per Condition V, Letter A Available Documents Drawing Number: QTR9300377 QTR9300378-A QTR 9300378-B P-MUSB-XXXX-XX Series Mini AB Series A Series B Part Number MUSB-XXXX-XX Amphenol Canada 605 Milner Avenue Toronto, Ontario, Canada M1B 5X6 Telephone: 416-291-4401 Fax: 416-754-8668 www.amphenolcanada.com or www.amphenolacp.com Copyright (c) Amphenol Corporation 2006 * All rights reserved MUSB CONNECTOR PRODUCT NUMBERING SYSTEM MUSB - C 2 1 1 - 3 1 MUSB Connector series designation - Rugged USB STYLE A - Receptacle type A, single B - Receptacle type Mini-B, single C - Receptacle type A over type A, stacked D - Receptacle type B, single E - Receptacle type Mini-AB, single TERMINATION 1 - Right angle pcb tail 2 - Right angle pcb tail, on pcb with right angle cable header, note 1 3 - Right angle pcb tail, on pcb with matching USB termination, note 2 4 - Right angle pcb tail, on pcb with terminal block(s), note 3 5 - Vertical pcb tail 6 - Right angle pcb tail, on pcb with MRJ & r/a cable header, note 5 8 - Right angle pcb tail, on pcb with vertical cable header, note 5 A - Right angle pcb tail, on pcb without extra connectors,note 4 B - Right angle pcb tail, on pcb vertical 5 pin one row header note 6 D - Right angle pcb tail, on pcb, vertical 2x5 dual row header note 7 NUMBER OF CONTACTS 1 - Standard 4 per port (use for styles A, C & D) 5 - Standard 5 per port (use for styles B & E) COLOR 1 - Standard black OPTIONS 0 - No rear shield; shell with Unified National thread, note 8 & 9 3 - With rear shield; shell with Unified National thread, note 8 & 9 M - With rear shield; shell with Metric thread, note 8 & 10 SPECIALS 0 - Standard (means 30u" (0.76um) gold, no dust cover) 1 - With grey color dust cover (supplied bulk packed) 3 - 50u" (1.27um) gold 5 - With black color dust cover (supplied bulk packed) 6 - Vertical with 4.6mm tail length - for MUSB-A511-06 only UNIQUE SPECIAL CODE No Digit - Part defined by previous 10 digits 1 to 9 - Unique special feature. Consult Factory Notes 1) Termination code 2 currently available for styles A, C & D. A 14 pin cable header is used for styles A & C. A 10 pin cable header is used for style D. 2) Termination code 3 currently available for styles A & C. 3) Termination code 4 currently available for style C using 2 x 5 position terminal blocks. Proposed for style A. 4) Termination code 6 proposed for style A only. 5) Termination code 8 proposed for style A & C 6) Termination Code B currently available for style A 7) Termination code D currently available for style C 8) Rear shield required for styles A, C, D, with right angle pcb tails. Rear shield optional for styles B & E with r/a pcb tails. No rear shield for any vertical pcb tail. 9) Unified National thread - use #4-40 UNC for styles A, C, D, and #2-56 UNC for styles B & E. 10) Metric thread - use M3 for styles A, C, D, and M2 for styles B & E. 11) Unique special code defines the entire part. Note that code 3, for example, may have a completely different definition for every connector where it is used. Amphenol Canada 605 Milner Avenue Toronto, Ontario, Canada M1B 5X6 Telephone: 416-291-4401 Fax: 416-754-8668 www.amphenolcanada.com or www.amphenolacp.com Copyright (c) Amphenol Corporation 2006 * All rights reserved 3