MBRF20200CTG - ON Semiconductor L.L.C.

August, 2008 − Rev. 7

1Publication Order Number:

MBRF20200CT/D

MBRF20200CT

Preferred Device

SWITCHMODEt

Schottky Power Rectifier

The SWITCHMODE Power Rectifier employs the Schottky Barrier

principle in a large area metal−to−silicon power diode.

State−of−the−art geometry features epitaxial construction with oxide

passivation and metal overlay contact. Ideally suited for use as

rectifiers in very low−voltage, high−frequency switching power

supplies, free wheeling diodes and polarity protection diodes.

Features

•Highly Stable Oxide Passivated Junction

•Very Low Forward Voltage Drop

•Matched Dual Die Construction

•High Junction Temperature Capability

•High dv/dt Capability

•Guardring for Stress Protection

•Epoxy Meets UL 94 V−0 @ 0.125 in

•Electrically Isolated. No Isolation Hardware Required.

•Pb−Free Package is Available*

Mechanical Characteristics:

•Case: Epoxy, Molded

•Weight: 1.9 Grams (Approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

•Lead Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

Device Package Shipping

ORDERING INFORMATION

MBRF20200CT TO−220 50 Units/Rail

SCHOTTKY BARRIER

RECTIFIER

20 AMPERES, 200 VOLTS

Preferred devices are recommended choices for future use

and best overall value.

http://onsemi.com

MBRF20200CTG TO−220

(Pb−Free)

50 Units/Rail

ISOLATED TO−220

CASE 221D

STYLE 3

MARKING DIAGRAM

AYWW

B20200G

A K A

A = Assembly Location

Y = Year

WW = Work Week

B20200 = Device Code

G = Pb−Free Package

AKA = Polarity Designator

MBRF20200CT

http://onsemi.com

MAXIMUM RATINGS (Per Leg)

Rating Symbol Value Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

200 V

Average Rectified Forward Current Per Leg

(Rated VR) TC = 125°C Per Package

IF(AV) 10

Peak Repetitive Forward Current, Per Leg (Rated VR, Square Wave, 20 kHz) TC = 90°C IFRM 20 A

Nonrepetitive Peak Surge Current

(Surge applied at rated load conditions halfwave, single phase, 60 Hz)

IFSM 150 A

Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz) IRRM 1.0 A

Operating Junction Temperature and Storage Temperature TJ, Tstg −65 to +150 °C

Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

THERMAL CHARACTERISTICS (Per Leg)

Rating Symbol Value Unit

Thermal Resistance, Junction−to−Case RqJC 3.5 °C/W

ELECTRICAL CHARACTERISTICS (Per Leg)

Rating Symbol Max Unit

Maximum Instantaneous Forward Voltage (Note 1)

(iF = 10 Amp, TC = 25°C)

(iF = 10 Amp, TC = 125°C)

(iF = 20 Amp, TC = 25°C)

(iF = 20 Amp, TC = 125°C)

0.9

0.8

1.0

0.9

Maximum Instantaneous Reverse Current (Note 1)

(Rated dc Voltage, TC = 25°C)

(Rated dc Voltage, TC = 125°C)

1.0

DYNAMIC CHARACTERISTICS (Per Leg)

Capacitance (VR = −5.0 V, TC = 25°C, Freq. = 1.0 MHz) CT500 pF

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%

Figure 1. Typical Forward Voltage (Per Leg)

100

10.2 0.4 0.6 0.8 1

TJ = 125°C

TJ = 100°C

TJ = 25°C

vF, INSTANTANEOUS VOLTAGE (VOLTS)

TJ = 150°C

I , INSTANEOUS FORWARD CURRENT (AMP)

I , REVERSE CURRENT ( A)

Rμ

VR, REVERSE CURRENT (VOLTS)

10,000

1,000

100

0.1

0.01 20 40 60 80 100 120 140 160 180 200

TJ = 1255C

TJ = 1005C

TJ = 1505C

TJ = 255C

Figure 2. Typical Reverse Current (Per Leg)

MBRF20200CT

http://onsemi.com

TEST CONDITION FOR ISOLATION TEST*

FULLY ISOLATED PACKAGE

LEADS

HEATSINK

0.110, MIN

Figure 3. Mounting Position

*Measurement made between leads and heatsink with all leads shorted together.

MOUNTING INFORMATION

CLIP

HEATSIN

Figure 4. Typical Mounting Technique

Clip−Mounted

MBRF20200CT

http://onsemi.com

PACKAGE DIMENSIONS

TO−220 FULLPAK

CASE 221D−03

ISSUE J

STYLE 3:

PIN 1. ANODE

2. CATHODE

3. ANODE

DIM

MIN MAX MIN MAX

MILLIMETERS

0.617 0.635 15.67 16.12

INCHES

B0.392 0.419 9.96 10.63

C0.177 0.193 4.50 4.90

D0.024 0.039 0.60 1.00

F0.116 0.129 2.95 3.28

G0.100 BSC 2.54 BSC

H0.118 0.135 3.00 3.43

J0.018 0.025 0.45 0.63

K0.503 0.541 12.78 13.73

L0.048 0.058 1.23 1.47

N0.200 BSC 5.08 BSC

Q0.122 0.138 3.10 3.50

R0.099 0.117 2.51 2.96

S0.092 0.113 2.34 2.87

U0.239 0.271 6.06 6.88

−B−

−Y−

3 PL

123

0.25 (0.010) Y

SEATING

PLANE

−T−

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH

3. 221D-01 THRU 221D-02 OBSOLETE, NEW

STANDARD 221D-03.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5773−3850

MBRF20200CT/D

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative