AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
1
HMC635LC4
v02.0218
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
General Description
Features
Functional Diagram
The HMC635LC4 is a GaAs PHEMT MMIC Driver
Amplier die which operates between 18 and 40
GHz. The amplier provides 18.5 dB of gain, +27
dBm Output IP3, and +22 dBm of output power at 1
dB gain compression, while requiring 280 mA from a
+5V supply. Ideal as a driver amplier for microwave
radio applications, or as an LO driver for mixers
operating between 18 and 40 GHz, the HMC635LC4
is capable of providing up to +23.5 dBm of saturated
output power at 15% PAE. The amplier’s I/Os are DC
blocked and internally matched to 50 Ohms making it
ideal for integration into Multi-Chip-Modules (MCMs).
Gain: 18.5 dB [2]
P1dB: +22 dBm [2]
Output IP3: +27 dBm
Saturated Power: +23.5 dBm @ 15% PAE [2]
Supply Voltage: +5V @ 280 mA
50 Ohm Matched Input/Output
24 Lead Ceramic 4x4mm SMT Package: 16mm2
Electrical Specications
TA = +25° C, Vdd= Vdd1, 2, 3, 4 = +5V, Idd= Idd1 + Idd2 + Idd3 + Idd4 = 280mA [1]
Typical Applications
The HMC635LC4 is ideal for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios & VSAT
• LO Driver for Mixers
• Military & Space
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 18 - 36 36 - 40 GHz
Gain [2] 15 18.5 15 17. 5 dB
Gain Variation Over Temperature 0.045 0.06 0.045 0.06 dB/ °C
Input Return Loss 13 7dB
Output Return Loss 10 7dB
Output Power for 1 dB Compression (P1dB) [2] 19 22 16 21 dBm
Saturated Output Power (Psat) [2] 23.5 21.5 dBm
Output Third Order Intercept (IP3) 22 27 21 26 dBm
Noise Figure [2] 7 7 dB
Total Supply Current (Idd1 + Idd2 + Idd3 + Idd4) 280 280 mA
[1] Adjust Vgg1 = Vgg2 between -2 to 0V to achieve Idd= 280 mA Typical.
[2] Board loss subtracted out for gain, power and noise gure measurements.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
2
HMC635LC4
v02.0218
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Input Return Loss vs. Temperature Output Return Loss vs. Temperature
Broadband Gain & Return Loss [1] Gain vs. Temperature [1]
P1dB vs. Temperature [1] Psat vs. Temperature [1]
-25
-15
-5
5
15
25
10 15 20 25 30 35 40 45 50
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
16 21 26 31 36 41
+25C
- 40C
RETURN LOSS (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
16 21 26 31 36 41
+25C
- 40C
GAIN (dB)
FREQUENCY (GHz)
16
18
20
22
24
26
16 21 26 31 36 41
+25C
- 40C
P1dB (dBm)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
16 21 26 31 36 41
+25C
- 40C
RETURN LOSS (dB)
FREQUENCY (GHz)
16
18
20
22
24
26
16 21 26 31 36 41
+25C
- 40C
Psat (dBm)
FREQUENCY (GHz)
[1] Board loss subtracted out for gain, power and noise gure measurements.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
3
HMC635LC4
v02.0218
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Power Compression @ 30 GHz [1]
Output IP3 vs. Temperature Noise Figure vs. Temperature [1]
Gain & Power vs.
Supply Voltage @ 30 GHz [1] Reverse Isolation vs. Temperature
Power Compression @ 40 GHz [1]
-70
-60
-50
-40
-30
-20
-10
0
16 21 26 31 36 41
+25C
- 40C
ISOLATION (dB)
FREQUENCY (GHz)
16
18
20
22
24
26
4.5 4.7 4.9 5.1 5.3 5.5
Gain
P1dB
Psat
GAIN (dB), P1dB (dBm), Psat (dBm)
Vdd (V)
16
20
24
28
32
36
40
16 21 26 31 36 41
+25 C
-40 C
IP3 (dBm)
FREQUENCY (GHz)
0
3
6
9
12
15
16 21 26 31 36 41
+25 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
30
-15 -10 -5 0 5 10
Pout (dBm)
Gain (dB)
PAE (%)
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
0
5
10
15
20
25
30
-15 -10 -5 0 5 10
Pout (dBm)
Gain (dB)
PAE (%)
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
[1] Board loss subtracted out for gain, power and noise gure measurements.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
4
HMC635LC4
v02.0218
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, 2, 3, 4) +5.5V
Gate Bias Voltage (Vgg1, Vgg2) -3 to 0V
RF Input Power (RFIN)(Vdd = +5 Vdc) 15 dBm
Channel Temperature 175 °C
Continuous Pdiss (T= 70 °C)
(derate 15.1 mW/°C above 70 °C) 1.575 W
Thermal Resistance
(channel to package base) 66.4 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -55 to +85 °C
Vdd (V) Idd (mA)
4.5 277
5.0 280
5.5 286
Note: Amplier will operate over full voltage ranges shown above
Typical Supply Current vs. Vdd
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC635LC4 Alumina, White Gold over Nickel MSL3 [1] H635
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
12
0.50
BSC
2.50 REF
24-Terminal Ceramic Leadless Chip Carrier [LCC]
(E-24-1)
Dimensions shown in millimeters.
BOTTOM VIEW
TOP VIEW
1
24
7
13
18
19
6
02-27-2017-B
0.36
0.30
0.24
EXPOSED
PAD
PKG-004840
PIN 1
INDICATOR
4.05
3.90 SQ
3.75
3.10 BSC
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
2.60
2.50 SQ
2.40
PIN 1
0.32
BSC
0.08
BSC
SIDE VIEW
1.00
0.90
0.80
SEATING
PLANE
24-Terminal Ceramic Leadless Chip Carrier [LCC]
(E-24-1)
Dimensions shown in millimeters.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
5
HMC635LC4
v02.0218
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 4 - 8, 10,
12 - 15, 17 - 19, 24,
Ground Paddle
GND These pins and package bottom must be connected to
RF/DC ground
3RFIN This pad is AC coupled
and matched to 50 Ohms.
16 RFOUT This pad is AC coupled
and matched to 50 Ohms.
9, 11 Vgg1, Vgg2
Gate control for amplier, please follow “MMIC Amplier
Biasing Procedure” application note. See assembly diagram for
required external components.
20 - 23 Vdd4 - Vdd1 Power Supply Voltage for the amplier. See assembly
diagram for required external components.
Application Circuit
2
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
6
HMC635LC4
v02.0218
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Analog Devices upon request.
List of Materials for Evaluation 122763 [1]
Item Description
J1 - J2 2.92 mm PC Mount K-Connector
VD1 - VD4,
VGG1, VGG2 DC Pin
C1 - C6 100 pF Capacitor, 0402 Pkg.
C7 - C12 1000 pF Capacitor, 0603 Pkg.
C13 - C18 4.7 µF Capacitor, Tantalum, Case A
U1 HMC635LC4 Driver Amplier
PCB [2] 122761 Evaluation PCB [3]
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
[3] Due to the very high frequency operation of this product
a custom LC4 PCB footprint and solder stencil are required
for this design. Performance shown in this data sheet
was produced using this custom footprint. DO NOT USE
Hittite’s standard LC4 footprint. Please contact Applications
for details.