3MTM ScotchmateTM
Nylon Reclosable F asteners
- 7 -
MSDS: 3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of
the Occupational Safety and Health Administration’ s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for
use, the product should not present a health and safety hazard. However, use or processing of the
product in a manner not in accordance with the directions for use may aff ect its performance and present
potential health and safety hazards.
TSCA: This product is defined as an article under the To xic Substances Control Act and therefore, it is
exempt from inventory listing requirements.
Military Spec. MIL-F-21840G: All of our nylon hook products described in this publication meet the
physical requirements of MIL-F-21840G, Type II Class 1. All of our loop products described in this
publication except 3M™ Scotchmate™ Reclosable Fastener SJ3529, meet the physical requirements of
MIL-F-21840G, Class 1 or Class 5.
GM 2743M Type II: SJ3571 and SJ3572 meet the requirements of GM2743GM Type II.
Certification/
Recognition
3M and Scotchmate are trademarks of 3M.
Printed in U.S .A.
©3M 2007 70-0706-5923-3 (3/07)
Recycled Paper
40% pr e-consumer
10% post-consumer
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Product Use
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging f or individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED T O, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED W ARRANTY ARISING OUT OF A COURSE OF
DEALING, CUST OM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Warranty and
Limited Remedy
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system
registered to ISO 9001:2000 and ISO/TS 16949:2002 standards.
ISO 9001:2000 - ISO/TS 16949:2002
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial