VS-130-160MT..KPbF Series www.vishay.com Vishay Semiconductors Three Phase Bridge, 130 A to 160 A (Power Modules) FEATURES * Package fully compatible with the industry standard INT-A-PAK power modules series * High thermal conductivity package, electrically insulated case * Excellent power volume ratio * 4000 VRMS isolating voltage * UL E78996 approved * Designed and qualified for industrial level MTK * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS IO 130 A to 160 A DESCRIPTION VRRM 800 V to 1600 V Package MTK Circuit configuration Three phase bridge A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2t VALUES 130MT.K VALUES 160MT.K 130 (160) 160 (200) A 85 (62) 85 (60) C 50 Hz 1130 1430 60 Hz 1180 1500 50 Hz 6400 10 200 60 Hz 5800 9300 64 000 102 000 CHARACTERISTICS TC I2t VRRM TStg TJ Range 800 to 1600 A A2s A2s V -40 to 150 Range UNITS C -40 to 150 ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-130MT.K VS-160MT.K VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 80 800 900 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700 IRRM MAXIMUM AT TJ = MAXIMUM mA 10 Revision: 17-Aug-17 Document Number: 94354 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-130-160MT..KPbF Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current at case temperature IO TEST CONDITIONS 120 rect. conduction angle t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t No voltage reapplied 100 % VRRM reapplied No voltage reapplied Initial TJ = TJ maximum 100 % VRRM reapplied t = 0.1 ms to 10 ms, no voltage reapplied VALUES 130MT.K VALUES 160MT.K 130 (160) 160 (200) A 85 (62) 85 (60) C 1130 1430 1180 1500 950 1200 1000 1260 6400 10 200 5800 9300 4500 7200 4100 6600 64 000 102 000 Low level value of threshold voltage VT(TO)1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ maximum 0.78 0.81 High level value of threshold voltage VT(TO)2 (I > x IT(AV)), TJ maximum 0.99 1.04 rf1 16.7 % x x IT(AV) < I < x IT(AV)), TJ maximum 4.59 3.52 High level of forward slope resistance rf2 (I > x IT(AV)), TJ maximum 4.17 3.13 1.63 1.49 VFM Ipk = 200 A, TJ = 25 C, tp = 400 s single junction RMS isolation voltage VISOL TJ = 25 C, all terminal shorted f = 50 Hz, t = 1 s A A2s A2s V Low level value of forward slope resistance Maximum forward voltage drop UNITS m V 4000 THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink Mounting torque 10 % Approximate weight to heatsink to terminal TEST CONDITIONS VALUES 130MT.K TJ, TStg RthJC RthCS VALUES 160MT.K -40 to 150 C DC operation per module 0.16 0.12 DC operation per junction 0.93 0.73 120 rect. conduction angle per module 0.18 0.15 120 rect. conduction angle per junction 1.08 0.88 Per module Mounting surface smooth, flat and greased A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. UNITS K/W 0.03 4 to 6 3 to 4 176 Nm g Revision: 17-Aug-17 Document Number: 94354 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-130-160MT..KPbF Series www.vishay.com Vishay Semiconductors Maximum Allowable Case Temperature (C) Instantaneous Forward Current (A) 150 130MT..K Series 140 130 120 110 120 (Rect) 100 90 + 80 ~ 70 - 60 50 0 20 40 60 80 100 TJ = 25 C TJ = 150 C 10 130MT..K Series Per junction 1 0 100 120 140 160 180 1.0 2.0 3.0 4.0 5.0 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 1 - Current Rating Characteristics Fig. 2 - Forward Voltage Drop Characteristics 500 100 50 0 W K/ W 300 0.3 250 K/W 150 0.5 K/W 0.7 K/W 100 1.5 K 200 R - 150 K/ W 200 350 K/ 250 12 0.2 05 300 0. 400 0. 120 (Rect) 350 450 = 400 SA Maximum Total Power Loss (W) 500 130MT..K Series TJ = 150 C 450 R th Maximum Total Power Loss (W) 1000 /W 50 0 0 20 40 60 80 100 120 140 0 160 Total Output Current (A) 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 3 - Total Power Loss Characteristics 1000 800 700 600 500 400 130MT..K Series 300 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied 1100 Peak Half Sine Wave Forward Current (A) 900 Peak Half Sine Wave Forward Current (A) 1200 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 1000 900 800 700 600 500 400 130MT..K Series 300 200 200 1 10 100 0.01 0.1 1.0 Number of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current Revision: 17-Aug-17 Document Number: 94354 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-130-160MT..KPbF Series www.vishay.com Vishay Semiconductors Instantaneous Forward Current (A) 150 160MT..K Series Maximum Allowable Case Temperature (C) 140 130 120 120 (Rect) 110 100 90 + 80 ~ 70 - 60 50 0 40 80 120 160 200 100 TJ = 25 C TJ = 150 C 10 160MT..K Series Per junction 1 240 0 1 2 3 4 5 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristic Fig. 7 - Forward Voltage Drop Characteristics 600 600 160MT..K Series TJ = 150 C 500 Maximum Total Power Loss (W) Maximum Total Power Loss (W) 1000 120 (Rect) 400 300 200 100 0 R 0. 500 1 th SA K/ 0.1 W 5K /W 0.2 K/W 0.3 K/W 0.5 K/W 400 300 200 = 0. 05 K/ W - R 0.7 K/W 1.5 K/W 100 0 0 40 80 120 160 25 0 200 Total Output Current (A) 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 8 - Total Power Loss Characteristics At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s Peak Half Sine Wave Forward Current (A) 1200 1100 1000 900 800 700 600 500 1300 1200 1100 10 100 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied 1000 900 800 700 600 400 300 1 1400 500 160MT..K Series 400 1500 Peak Half Sine Wave Forward Current (A) 1300 300 0.01 160MT..K Series 0.1 1.0 Number of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current Revision: 17-Aug-17 Document Number: 94354 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-130-160MT..KPbF Series ZthJC - Transient Thermal Impedance (K/W) www.vishay.com Vishay Semiconductors 10 Steady state value RthJC = 0.93 K/W RthJC = 0.73 K/W 1 130MT..K Series (DC operation) 160MT..K Series 0.1 Per junction 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VS- 16 0 MT 160 1 2 3 4 5 K 1 - Vishay Semiconductors product 2 - PbF 6 3 - Current rating code: 13 = 130 A (average) 16 = 160 A (average) Three phase diodes bridge 4 - Essential part number 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) 6 - PbF = Lead (Pb)-free Note * To order the optional hardware go to: www.vishay.com/doc?95172 CIRCUIT CONFIGURATION + D A B ~ C - E F LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95004 Revision: 17-Aug-17 Document Number: 94354 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors MTK (with and without optional barrier) DIMENSIONS WITH OPTIONAL BARRIERS in millimeters (inches) Fast-on tab 2.8 x 0.8 (type 110) 8.5 0.5 (0.34 0.02) 30 0.5 (1.17 0.02) 24 0.5 (0.94 0.02) 38 0.5 (1.5 0.02) 25.5 0.5 (1.004 0.02) 28 1 (1.11 0.04) Screws M5 x 0.8 length 10 35 0.3 (1.38 0.01) 75 0.5 (2.95 0.02) A 2 3 4 B C 5 6 7 8 O 6.5 0.2 (O 0.26 0.01) 14 0.3 (0.55 0.01) 1 D 18 0.3 (0.71 0.01) 5 0.3 (0.2 0.01) F E 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) Document Number: 95004 Revision: 27-Aug-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Outline Dimensions MTK (with and without optional barrier) Vishay Semiconductors DIMENSIONS WITHOUT OPTIONAL BARRIERS in millimeters (inches) Fast-on tab 2.8 x 0.8 (type 110) 24 0.5 (0.94 0.02) 8.5 0.5 (0.34 0.02) 30 0.5 (1.17 0.02) 25.5 0.5 (1.004 0.02) 28 1 (1.11 0.04) Screws M5 x 0.8 length 10 35 0.3 (1.38 0.01) 75 0.5 (2.95 0.02) A 2 3 4 B C 5 6 7 8 O 6.5 0.2 (O 0.26 0.01) 14 0.3 (0.55 0.01) 1 D 18 0.3 (0.71 0.01) 5 0.3 (0.2 0.01) F E 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 95004 Revision: 27-Aug-07 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-160MT160KPBF VS-160MT80KPBF VS-160MT120KPBF VS-160MT140KPBF VS-130MT100KPBF VS130MT140KPBF VS-160MT100KPBF VS-130MT120KPBF VS-130MT80KPBF VS-130MT160KPBF