THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION Tat Loc DIST REVISIONS ALL INTERNATIONAL RIGHTS RESERVED. COPYRIGHT = BY TYCO ELECTRONICS CORPORATION. _ _ P LTR DESCRIPTION DATE DWN APVD 1532173 W po a a a a a a a a a _ | A | PRODUCTION RELEASE 03 SEP 08;BUR|IMKS | 1.075+.010 ! ~l0038lx SD 2X 30 4X R.O671 KR | .020M@|xX|BM | POSITION 21 B | B , 050 _/~ ! YN I | Goooclc000\\ {p-- [M83513/04XXxx___| { ,) 4].020@|x|Y@ ao SSE ONES A= 1852 3 Z ! ya 2X 9.092+.004 |Z.014@]x|BO@]Y ] | .050 TYP NO 21X .0320+.0015 - AT SOCKET TIPS OE ]ZB.008M|xX|BH)|Y@ INTERFACE DETAIL POSITION 1 . 365 _ VIEW_BB INTERFACIAL SEAL SOCKET CONTACT ey pe 820 ALL AROUND A a / SHELL ; .195+.005 TO | a DKA 419+.010 SO | [eo EE YYWW | .093+.005 ory 144 | : i | 130 KK A | | | .260+.010 _ 6907-810 _ Neuere | | -|.020M|X|Y@) -|.020M|X|BM ! oI ATT SNe aS _ om Z\ AS Ne] I | | | | SL ! ! IL ___--_ A SECTION A-A /\. CONNECTOR SHALL BE MARKED IN ACCORDANCE WITH METHOD | OF MIL-STD-1285. MARKING SHALL CONTAIN THE MILITARY PIN, CAGE CODE (OR TE), AND DATE CODE. EXAMPLE: M83513/04XXXX TE YYWW (WHERE XXXX IS PART OF THE PIN SHOWN IN THE "MILDTL-83513 COLUMN OF THE PART NUMBER TABLE, AND YYWW IS THE DATE CODE). FOR THE SIZE 21 RECEPTACLE, THE MARKING MUST BE PRINTED ON BOTH SIDES OF THE FLANGE. TEXT HEIGHT SHALL BE .035 INCH MINIMUM. /. POSITION 1 SHALL BE INDICATED BY AN IDENTIFIABLE MARK, LOCATED APPROXIMATELY AS SHOWN ON THE POSITION 1 SIDE OF THE CONNECTOR FLANGE. THIS MARK SHALL BE INCLUDED AS PART OF THE PART MARKING INFORMATION. = = E THIS DRAWING IS A CONTROLLED DOCUMENT. B. ROMANCHUK = Tyco Electronics Corporation LX LENGTH IS SHOWN IN THE "L DIM COLUMN OF THE PART NUMBER TABLE. LENGTH TOLERANCE IS +1.0/0.0 FOR INSULATED Ti = Tyco nies Horrisburg, PA 17105-3608 WIRE TERMINATIONS, AND +0.20/0.00 FOR UNINSULATED WIRE TERMINATIONS DIMENSIONS: RES. br 5 See 08 INCHES M. STORRY /\, INSULATED WIRE IS SHOWN FOR REFERENCE ONLY. PART MAY BE TERMINATED WITH INSULATED OR UNINSULATED WIRE onc 4 - ProBUcT so VICRO_D PER MIL_DTL_83813/04 -005 ; /5\. EPOXY ENCAPSULATION. EPOXY MAY WICK .125 INCH MAX FOR INSULATED WIRE, AND .050 INCH MAX FOR UNINSULATED WIRE. 4 PC _ SIZE] CAGE CODE | DRAWNG NO RESTROTED TO 6 ALL DIMENSIONS AND REQUIREMENTS ARE PER MILDTL83513/4 eee ce works en A2|98278\(G=1532173 _ CUSTOMER DRAWING SE ay LT or 2 | A 3307-7 (1/08)1532173 4 5 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION -,-. Loc DIST REVISIONS ) copyricut = BY TYCO ELECTRONICS CORPORATION, _\~_'NIERNATIONAL RIGHTS. RESERVED. > oOR DESCRIPTION DATE DWN] -APVD | SEE SHEET 1 - | - < |4& A PART NUMBER L DIM|MILDTL83513 PIN MICRODOT P/N MCKS DESCRIPTION 1532173-1 18 |M83513/04CO1N 09463260001 MCKSN1B21S6G61-18.0 1542175-2 36 |M83513/04CO2N 09463260002 | MCKSN1B21S6G136.0 15321735-3 18 |M83513/04CO3N 09463260003 | MCKSN1B21S6G918.0 15421735-4 36 |M83513/04CO4N 09463260004 | MCKSN1B21S6G936.0 1582175-5 18 |M83513/04CO9N 09463260009 | MCKSN1B21S6Q1-18.0 1542175-6 36 | M83513/04C10N 0946326-0010 | MCKSN1B21S56Q136.0 154321735-7 18 |M83513/04C11N 09463260011 MCKSN1B21S6Q918.0 15421735-8 36 | M83513/04C12N 09463260012 | MCKSN1B21S6Q936.0 15421735-9 72 |M83513/04C13N 0946326-0013 | MCKSN1B-21S6G6172.0 1-1532175-0 72 |M83513/04C14N 09463260014 | MCKSN1B21S6G972.0 1-1532173-1 72 |M83513/04C15N 09463260015 | MCKSN1B21S6Q172.0 1-15321735-2 72 |M83513/04C16N 09463260016 | MCKSN1B21S6Q972.0 1-15452175-3 0.5 | M83513/04CO5N 09463260005 | MCKSN1B21S5L40.5 1-1532175-4 1.0 |M83513/04CO6N 09463260006 | MCKSN1B21S5L41.0 1-1532173-5 0.5 |M83513/04CO7N 094-63260007 | MCKSN1B-21S5L50.5 1-1532175-6 1.0 |M83513/04CO8N 09463260008 | MCKSN1B21S5L51.0 1-1532175-7 18 | M83513/04CO1C 09463360001 MCKSC2B21S6G61-18.0 11542175-8 36 |M83513/04CO2C 09463560002 | MCKSC2B21S56G6136.0 1-1532173-9 18 | M83513/04CO3C 09463360003 | MCKSC2B21S56G918.0 2-153521735-0 36 |M83513/04CO4C 09463560004 | MCKSC2B21S6G936.0 215321735-1 0.5 |M83513/04CO5C 09463360005 | MCKSC2B21S5L40.5 2-15321735-2 1.0 |M83513/04CO6C 09463360006 | MCKSC2B21S5L41.0 2-15321735-3 0.5 | M83513/04CO7C 09463360007 | MCKSC2B21S5L50.5 2-15521/75-4 1.0 | M83513/04CO8C 0946356-0008 | MCKSC2B21S5L51.0 215321735-5 18 | M83513/04CO9C 09463360009 | MCKSC2B21S6Q118.0 21532173-6 36 | M83513/04C10C 09463360010 | MCKSC2B21S6Q136.0 2-15321735-7 18 |M83513/04C11C 09463360011 MCKSC2B21S56Q918.0 215521/75-8 36 | M83513/04C12C 09463360012 | MCKSC2B21S6Q936.0 21532173-9 72 |M83513/04C13C 09463560013 | MCKSC2B-21S6G61-72.0 5-1532175-0 72 |M83513/04C14C 09463360014 | MCKSC2B-21S6G972.0 5-1532175-1 72 |M83513/04C15C 0946336-0015 | MCKSC2B21S6Q172.0 5-153521735-2 72 |M83513/04C16C 09463360016 | MCKSC2B21S6Q972.0 THIS DRAWING IS A CONTROLLED DOCUMENT. |"8 povancHUuK Tyco Electronics Corporation CHI - Harrisburg, PA 17105-3608 ce OTHERWISE SPECIFIED: wD ay 08 SEP 8 | NAVE SCLPTACIE ASSEMBLY 0 PLC + PRODUCT SPEC ? 1 Puc * - _ MICROD PER MILDTL83513/04, OS Ble _ sreemmon see SIZE CAGE CODE vs ane arene RESTRICTED TO MATERIAL FINISH WEIGHT _ A? 98278 C1 9521735 7 - - CUSTOMER DRAWING SAE aT PT 9 oo IY A 3307-7 (1/08) W