M74HC132 Quad 2-input Schmitt NAND gate Datasheet - production data * Wide operating voltage range: VCC (opr) = 2 V to 6 V * Pin and function compatible with 74 series 132 SO14 TSSOP14 * ESD performance - HBM: 2 kV - MM: 200 V - CDM: 1 kV Description Features The M74HC132 is a high-speed CMOS quad 2input Schmitt NAND gate fabricated with silicon gate C2MOS technology. * High-speed: tPD = 11 ns (typ.) at VCC = 6 V Pin configuration and function are identical to those of the M74HC00. The hysteresis characteristics (around 20 % VCC) of all inputs allow slowly changing input signals to be transformed into sharply defined jitter-free output signals. * Low power dissipation: ICC = 1 A (max.) at TA = 25 C * High noise immunity: VH(typ) = 0.9 V at VCC = 5 V * Symmetrical output impedance: |IOH| = IOL = 4 mA (min.) All inputs are equipped with protection circuits against static discharge and transient excess voltage. * Balanced propagation delays: tPLH tPHL Table 1. Device summary Order code Temp. range Package M74HC132RM13TR -55 C to 125 C S014 M74HC132YRM13TR(1) -40 C to 125 C SO14 (automotive grade) M74HC132TTR -55 C to 125 C TSSOP14 M74HC132YTTR(1) -40 C to 125 C TSSOP14 (automotive grade) Packing Marking 74HC132 Tape and reel 74HC132Y HC132 HC132Y 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent. January 2014 This is information on a product in full production. DocID1896 Rev 3 1/13 www.st.com Contents M74HC132 Contents 1 Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.1 SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.2 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 DocID1896 Rev 3 M74HC132 1 Pin information Pin information Figure 1. Pin connection and IED logic symbols GAMS0301141652CB Table 2. Pin description Pin no Symbol 1, 4, 9, 12 1A to 4A 2, 5, 10, 13 1B to 4B 3, 6, 8, 11 1Y to 4Y Data outputs 7 GND Ground (0 V) 14 VCC Positive supply voltage DocID1896 Rev 3 Name and function Data inputs 3/13 13 Functional description 2 M74HC132 Functional description Table 3. Truth table A B Y L L H L H H H L H H H L Figure 2. Input and output equivalent circuit VCC VCC Output Input GND 4/13 GND DocID1896 Rev 3 M74HC132 3 Electrical characteristics Electrical characteristics "Absolute maximum ratings" are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Table 4. Absolute maximum ratings Symbol VCC Parameter Value Supply voltage -0.5 to +7 VI DC input voltage VO DC output voltage IIK DC input diode current IOK DC output diode current IO DC output current 25 DC VCC or ground current 50 ICC or IGND Unit -0.5 to VCC + 0.5 PD Power dissipation Tstg Storage temperature TL Lead temperature (10 sec) V 20 SO14 500(1) TSSOP14 450(1) -65 to +150 300 mA mW C 1. Power dissipation at 65 C. Derating from 65 C to 125 C: SO14 -7 mW/C, TSSOP14 -6.1 mW/C. Table 5. Recommended operating conditions Symbol VCC Parameter Supply voltage VI Input voltage VO Output voltage Top Operating temperature Value Unit 2 to 6 0 to VCC -55 to 125 DocID1896 Rev 3 V C 5/13 13 Electrical characteristics M74HC132 Table 6. DC specifications Test condition Symbol VP VN VH VOH VOL II ICC 6/13 Parameter High level threshold voltage Low level threshold voltage Hysteresis voltage Value TA = 25 C VCC (V) -40 to 85 C -55 to 125 C Unit Min. Typ. Max. Min. Max. Min. Max. 2.0 1.0 1.25 1.5 1.0 1.5 1.0 1.5 4.5 2.3 2.7 3.15 2.3 3.15 2.3 3.15 6.0 3.0 3.5 4.2 3.0 4.2 3.0 4.2 2.0 0.3 0.65 0.9 0.3 0.9 0.3 0.9 4.5 1.13 1.6 2.0 1.13 2.0 1.13 2.0 6.0 1.5 2.3 2.6 1.5 2.6 1.5 2.6 2.0 0.3 0.6 1.0 0.3 1.0 0.3 1.0 4.5 0.6 1.1 1.4 0.6 1.4 0.6 1.4 6.0 0.8 1.2 1.4 0.8 1.7 0.8 1.7 V V V 2.0 IO = -20 A 1.9 2.0 1.9 1.9 4.5 IO = -20 A 4.4 4.5 4.4 4.4 6.0 IO = -20 A 5.9 6.0 5.9 5.9 4.5 IO = -4.0 mA 4.18 4.31 4.13 4.10 6.0 IO = -5.2 mA 5.68 5.8 5.63 5.60 2.0 IO = -20 A 0.1 0.1 0.1 4.5 IO = -20 A 0.1 0.1 0.1 6.0 IO = -20 A 0.1 0.1 0.1 4.5 IO = -4.0 mA 0.17 0.26 0.33 0.40 6.0 IO = -5.2 mA 0.18 0.26 0.33 0.40 Input leakage current 6.0 VI = VCC or GND 0.1 1 1 A Quiescent supply current 6.0 VI = VCC or GND 1 10 20 A High level output voltage Low level output voltage DocID1896 Rev 3 V V M74HC132 Electrical characteristics Table 7. AC electrical characteristics (CL = 50 pF, Input tr = tf = 6 ns) Test condition Symbol TA = 25 C Parameter VCC (V) tTLH, tTHL Output transition time Min. -55 to 125 C Min. Min. Max. 2.0 30 75 95 110 4.5 8 15 19 22 7 13 52 105 4.5 13 21 26 32 6.0 11 18 22 27 - 2.0 Propagation delay time -40 to 85 C Typ. 6.0 tPLH, tPHL Value - Max. 16 130 - Unit Max. ns 19 160 ns Table 8. Capacitive characteristics Test condition Sym Value TA = 25C Parameter VCC (V) CIN Input capacitance CPD Power dissipation capacitance(1) 5.0 Min - Typ Max 5 10 -40 to 85 C -55 to 125 C Min Min 29 Max 10 - Unit Max 10 - pF 1. CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load (refer to test circuit). Average operating current can be obtained by the following equation: ICC(opr) = CPD x VCC x fIN + ICC/4 (per gate). Figure 3. Test circuit GAMS0301141630CB 1. Legend: CL = 50 pF or equivalent (includes jig and probe capacitance). RT = ZOUT of pulse generator (typically 50 ). DocID1896 Rev 3 7/13 13 Electrical characteristics M74HC132 Figure 4. Propagation delay times (f = 1 MHz; 50 % duty cycle) GAMS0301141646CB 8/13 DocID1896 Rev 3 M74HC132 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. DocID1896 Rev 3 9/13 13 Package information 4.1 M74HC132 SO14 package information Figure 5. SO14 package mechanical drawing / * F & $ D E H D 6 H E ( ' 0 ) *$06&% Table 9. SO14 package mechanical data Dimensions Ref Millimeters Min. Typ. A a1 Max. Min. Typ. 1.75 0.1 0.2 a2 10/13 Inches Max. 0.068 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 45 D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S 8 8 DocID1896 Rev 3 M74HC132 4.2 Package information TSSOP14 package information Figure 6. TSSOP14 package mechanical drawing $ $ $ H E . / F ( ' ( 3,1,'(17,),&$7,21 *$06&% Table 10. TSSOP14 package mechanical data Dimensions Ref Millimeters Min. Typ. A Inches Max. Min. Typ. 1.2 A1 0.05 A2 0.8 b Max. 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.9 5 5.1 0.193 0.197 0.201 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.48 0.169 0.173 0.176 e 1 0.65 K 0 L 0.45 0.60 0.0256 8 0 0.75 0.018 DocID1896 Rev 3 8 0.024 0.030 11/13 13 Ordering information 5 M74HC132 Ordering information Table 11. Order codes Order code Temp. range Package Packing M74HC132RM13TR -55 C to 125 C S014 M74HC132YRM13TR(1) -40 C to 125 C SO14 (automotive grade) M74HC132TTR -55 C to 125 C TSSOP14 M74HC132YTTR(1) -40 C to 125 C TSSOP14 (automotive grade) Marking 74HC132 Tape and reel 74HC132Y HC132 HC132Y 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent. 6 Revision history Table 12. Document revision history Date 10-Jan-2014 12/13 Revision 3 Changes Removed DIP14 package Added ESD data to Features Table 1: Device summary: added automotive grade order codes, added temperature range and marking details. Added Section 5: Ordering information. DocID1896 Rev 3 M74HC132 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER'S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID1896 Rev 3 13/13 13