SMT Power Inductors Power Beads - Volta 1 & 2 series Height: 3.2mm and 4.5mm Max Footprint: 7.0 x 6.4mm Max and 8.9 x 6.4mm Max Current Rating: up to 16A Inductance Range: 0.1H to 0.6H Frequency Range: up to 2MHz Electrical Specifications @ 25C - Operating Temperature -40C to +130C DCR (m) Saturation Current 2 (ADC) 100C Heating 3 Current (A) Trise 4 Factor K0 K1 K2 18 16.2 15 1.0032 .00319 .07381 100 36 30 16 2.2458 .00638 .03975 0.56 150 18 16.2 15 2.2458 .00638 .05961 0.45 0.56 200 16.8 15.1 15 2.2458 .00638 .07949 2.3 95 700 12.6 8.0 10.7 2.0400 .01276 .13196 Inductance @ Irated (nH 20%) Irated (ADC) TYP 95 15 PA0229NL 92 P2005 NL** MAX Inductance @ 0ADC (nH 20%) 25C 0.31 0.39 100 16 0.68 0.80 142.5 15 0.45 P2004NL 190 15 PA0277 NL** 600* 10.7 5, 6 Part Number Core Loss Factor 4 Volta 1 P1681NLT Volta 2 * DCR and Inductance rating for indicated parts is for both windings tied in series. ** Contact Pulse for availability Mechanical Volta 1 P1681NLT Weight ...........................0.464 grams Tape & Reel ........................1500/reel Inches Dimensions: Unless otherwise specified, all tolerances are .010 mm 0,25 USA 858 674 8100 Germany 49 7032 7806 0 1 Singapore 65 6287 8998 pulseelectronics.com Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 P522.F (06/15) SMT Power Inductors Power Beads - Volta 1 & 2 series Mechanicals (continued) Schematics Volta 2 P2004NL/P2005NL PA0229NL P1681NL P2004NL P2005NL PA0229NL NL PA0277NL Weight ...........................0.945 grams Tape & Reel ........................1000/reel Inches Dimensions: mm Unless otherwise specified, all tolerances are .010 0,25 2 pulseelectronics.com P522.F (06/15) SMT Power Inductors Power Beads - Volta 1 & 2 series Notes: 1. The rated current as listed is either the saturation current or the heating current depending on which value is lower. 2. The saturation current is the current which causes the inductance to drop by 10% at the stated ambient temperatures (-40C, 25C, 125C). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 3. The heating current is the DC current which causes the temperature of the part to increase by approximately 30C. This current is determined by mounting the component on a PCB with .25" wide, 3 oz. equivalent copper traces, and applying the current to the device for 30 minutes. 4. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. In order to determine the approximate total losses (or temperature rise) for a given application both copper losses and core losses should be taken into account. 5. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number, (i.e. PA0277NLT). NLT NL NL Estimated Temperature Rise: Trise = Coreloss (mW) + Copper Loss (mW) K0 1.6688 2.17 Coreloss = K1 * (Fsw (kHz)) * (K2 * dl) Copper Loss = Irms * DCR (m) (mW) 1 Irms = 2 IDC + dl 12 2 .833 (C) (mW) 2 (Arms) Fsw(kHz) = switching frequency (kHz) dI = delta I across the component (A) The temperature of the component (ambient temperature + temperature rise) should be within the listed operating temperature range. NL PA0277NL Inductance vs. DC Current at 25C For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 Aerospace TechnolSuper Ocean Finance #03-02 Zhongyuan Road ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 320 High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Shenzen, PR China China Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Tel: 858 674 8100 Tel: 49 7032 78060 518057 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Fax: 858 674 8262 Fax: 49 7032 7806 135 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: 86 755 33966700 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2015. Pulse Electronics, Inc. All rights reserved. 3 pulseelectronics.com P522.E (06/15)