P522.F (06/15)1pulseelectronics.com
SMT Power Inductors
Power Beads - Volta 1 & 2 series
Height: 3.2mm and 4.5mm Max
Footprint: 7.0 x 6.4mm Max and 8.9 x 6.4mm Max
Current Rating: up to 16A
Inductance Range: 0.1µH to 0.6µH
Frequency Range: up to 2MHz
Volta 1
Mechanical
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C
Part
Number
Inductance
@ Irated
(nH ± 20%)
Irated
(ADC)
DCR
(mΩ)Inductance
@ 0ADC
(nH ± 20%)
Saturation Current
(ADC)Heating
Current
(A)
Trise
Factor
K0
Core Loss Factor
25°C 100°C K1 K2TYP MAX
Volta 1
P1681NLT 95 15 0.31 0.39 100 18 16.2 15 1.0032 .00319 .07381
Volta 2
PA0229NL 92 16 0.68 0.80 100 36 30 16 2.2458 .00638 .03975
P2005 NL** 142.5 15 0.45 0.56 150 18 16.2 15 2.2458 .00638 .05961
P2004NL 190 15 0.45 0.56 200 16.8 15.1 15 2.2458 .00638 .07949
PA0277 NL** 600* 10.7 2.3 95 700 12.6 8.0 10.7 2.0400 .01276 .13196
* DCR and Inductance rating for indicated parts is for both windings tied in series.
** Contact Pulse for availability
5, 6
2
344
P1681NLT
Weight ...........................0.464 grams
Tape & Reel ........................1500/reel
Dimensions: Unless otherwise specified, all tolerances are ±
Inches
mm
.010
0,25
P522.F (06/15)2pulseelectronics.com
SMT Power Inductors
Power Beads - Volta 1 & 2 series
Volta 2
Mechanicals
P1681NL
P2004NL
P2005NL
PA0229NL
PA0277NL
Schematics
P2004NL/P2005NL
PA0229NL
NL
(continued)
Weight ...........................0.945 grams
Tape & Reel ........................1000/reel
Dimensions:
Unless otherwise specified,
all tolerances are ±
Inches
mm
.010
0,25
3pulseelectronics.com
SMT Power Inductors
Power Beads - Volta 1 & 2 series
P522.E (06/15)
For More Information
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Einsteinstrasse 1
D-71083 Herren-
berg
Germany
Tel: 49 7032 78060
Fax: 49 7032 7806 135
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technol-
ogy Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823 (Pulse)
Fax: 886 3 4356820 (FRE)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2015. Pulse Electronics, Inc. All rights reserved.
Notes:
1. The rated current as listed is either the saturation current or the heating current
depending on which value is lower.
2. The saturation current is the current which causes the inductance to drop by 10%
at the stated ambient temperatures (-40°C, 25°C, 125°C). This current is determined by
placing the component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating eects) to the component.
3. The heating current is the DC current which causes the temperature of the part to
increase by approximately 30°C. This current is determined by mounting the component
on a PCB with .25” wide, 3 oz. equivalent copper traces, and applying the current to the
device for 30 minutes.
4. In high volt*time applications, additional heating in the component can occur due to core
losses in the inductor which may neccessitate derating the current in order to limit the
temperature rise of the component. In order to determine the approximate total losses
(or temperature rise) for a given application both copper losses and core losses should be
taken into account.
5. Optional Tape & Reel packaging can be ordered by adding a “T” sux to the part number,
(i.e. PA0277NLT).
Estimated Temperature Rise:
Trise = (°C)
Coreloss = K1 * (Fsw (kHz)) * (K2 * dl) (mW)
Copper Loss = Irms * DCR (mΩ) (mW)
Irms = IDC + (Arms)
Fsw(kHz) = switching frequency (kHz)
dI = delta I across the component (A)
The temperature of the component (ambient temperature + temperature rise) should
be within the listed operating temperature range.
Coreloss (mW) + Copper Loss (mW)
K0
.833
1.6688 2.17
222
1
dl
12
NLTNLNLNL
PA0277NL Inductance vs. DC Current at 25ºC
