Semiconductor Components Industries, LLC, 2000
October, 2000 – Rev. 2 1Publication Order Number:
MBR2535CTL/D
MBR2535CTL
SWITCHMODE
Power Rectifier
...employing the Schottky Barrier principle in a large
metal–to–silicon power diode. State–of–the–art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for use in low voltage, high frequency
switching power supplies, free wheeling diodes, and polarity
protection diodes.
Very Low Forward Voltage (0.55 V Maximum @ 25 Amps)
Matched Dual Die Construction
(12.5 A per Leg or 25 A per Package)
Guardring for Stress Protection
Highly Stable Oxide Passivated Junction
(125°C Operating Junction Temperature)
Epoxy Meets UL94, VO at 1/8
Mechanical Characteristics
Case: Epoxy, Molded
Weight: 1.9 grams (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped 50 units per plastic tube
Marking: B2535L
MAXIMUM RATINGS (Per Leg)
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
35 V
Average Rectified Forward Current
(Rated VR, TC = 110°C) IF(AV) 12.5 A
Peak Repetitive Forward Current,
per Leg (Rated VR, Square Wave,
20 kHz, TC = 95°C)
IFRM 25 A
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions, Halfwave, Single
Phase, 60 Hz)
IFSM 150 A
Peak Repetitive Reverse Surge
Current (2.0 s, 1.0 kHz) IRRM 1.0 A
Storage Temperature Range Tstg –65 to +150 °C
Operating Junction Temperature TJ–65 to +125 °C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s
Controlled Avalanche Energy Waval 20 mJ
Device Package Shipping
ORDERING INFORMATION
MBR2535CTL TO–220
http://onsemi.com
TO–220AB
CASE 221A
PLASTIC
50 Units/Rail
3
4
1
SCHOTTKY BARRIER
RECTIFIER
25 AMPERES
35 VOLTS
1
3
2, 4
2
MARKING DIAGRAM
B2535L
B2535L = Device Code
MBR2535CTL
http://onsemi.com
2
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance — Junction to Case RθJC 2.0 °C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Maximum Instantaneous Forward Voltage (Note 1.)
(IF = 25 Amps, TJ = 25°C)
(IF = 12.5 Amps, TJ = 25°C)
(IF = 12.5 Amps, TJ = 125°C)
VF0.55
0.47
0.41
Volts
Maximum Instantaneous Reverse Current (Note 1.)
(Rated dc Voltage, TJ = 25°C)
(Rated dc Voltage, TJ = 125°C)
IR5.0
500
mA
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle 2.0%.
50
20
10
5
2
1
0.5
0.2
0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 10
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage, Per Leg
TJ = 25°C
TJ = 125°C
I , INSTANEOUS FORWARD CURRENT (AMP)
F
MBR2535CTL
http://onsemi.com
3
1000
100
10
1
0.1
I , REVERSE CURRENT (mA)
R
VR, REVERSE VOLTAGE (VOLTS)
05101520253035
Figure 2. Typical Reverse Current, Per Leg
TJ = 25°C
TJ = 100°C
TJ = 125°C
40
35
30
25
20
15
10
5
0
P , AVERAGE FORWARD POWER DISSIPATION (WATTS)
F(AV)
0 5 10 15 20 25 30 35 40
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 3. Forward Power Dissipation, Per Leg
TJ = 125°C
SINE WAVE
(RESISTIVE LOAD)
SQUARE
WAVE
dc
32
28
24
20
16
12
8
4
085 95 105 115 125
I , AVERAGE FORWARD CURRENT (AMPS)
F(AV)
TC, CASE TEMPERATURE (°C)
Figure 4. Current Derating
(RATED Vr APPLIED)
RθJC = 2.0°C/W
dc
SQUARE
20
18
16
14
12
10
8
6
4
2
0
0 25 50 75 100 125
I , AVERAGE FORWARD CURRENT (AMPS)
F(AV)
TA, AMBIENT TEMPERATURE (°C)
Figure 5. Current Derating Ambient, Per Leg
RθJA = 16°C/W
dc
SQUARE
WAVE
MBR2535CTL
http://onsemi.com
4
PACKAGE DIMENSIONS
TO–220
PLASTIC
CASE 221A–09
ISSUE AA
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.035 0.64 0.88
F0.142 0.147 3.61 3.73
G0.095 0.105 2.42 2.66
H0.110 0.155 2.80 3.93
J0.018 0.025 0.46 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 --- 1.15 ---
Z--- 0.080 --- 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
–T–
C
S
T
U
R
J
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly , any claim of personal injury or death associated with such unintended or unauthori zed use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MBR2535CTL/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland