ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 1Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Resin-Coated, Radial-Leaded
Solid Tantalum Capacitors
FEATURES
• RoHS compliant design available
• Flame retardant encapsulation
• Very high temperature range
• Improved humidity class
• Low leakage current
• Very high CV product
• Low failure rate
• Compliant to RoHS Directive 2002/95/EC
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
MECHANICAL SPECIFICATIONS
Color: Gold
Laser Marked: Capacity and voltage in clear text; plus pole
marked
Leads: Standard (tin/lead), RoHS compliant (100 % tin)
Tantalum capacitors with sintered anode and solid
semiconductor electrolyte with flame retardant fluidized bed
coating. The type ETPW is characterized by very favorable
electrical values even at higher ambient temperatures. The
capacitors comply with DIN 45910 part 146 and they are
also available as a radially taped version.
Note
(1) J, K with RM 2.5 mm: 100 μF - 6.3 V, 68 μF - 10 V, 47 μF - 16 V, 22 μF - 25 V
ORDERING INFORMATION
P1A 686 603 M 00 D E3
TYPE CAPACITANCE DC VOLTAGE RATING
AT + 85 °C
CAPACITANCE
TOLERANCE
LEAD STYLE AND
PACKAGING
RoHS
COMPLIANT
ETPW 1A ....
ETPW 6R
Expressed in
picofarads. The first
two digits are
significant figures.
The third is the number
of zeros following.
Expressed by zeros if
needed to complete the
3 digit block. A decimal
point is indicated by an
“0“ (603 = 6.3 V).
M = ± 20 %
K = ± 10 %
See Lead Styles
and Packaging table.
E3 = 100 % tin
termination (RoHS
compliant design)
Blank = SnPb
termination
(standard design)
DIMENSIONS in millimeters
MODEL D MAX. H MAX. RM
± 0.5 Ø D ± 0.05 FORM DS FORM L
H2 MAX. RM H2 MAX. RM
ETPW - 1 A, B 4.0 7.1 2.5 0.5 10.5 5 10.5 5
ETPW - 2 C, D 4.5 8.0 2.5 0.5 11.0 5 11.0 5
ETPW - 2 E 5.0 9.5 2.5 0.5 12.5 5 12.5 5
ETPW - 3 F 5.0 9.5 2.5 0.5 12.5 5 12.5 5
ETPW - 3 G 5.5 10.0 2.5 0.5 13.0 5 13.0 5
ETPW - 4 H 6.0 10.0 2.5 0.5 13.0 5 13.0 5
ETPW - 5 J, K (1) 8.6 12.5 2.5 0.5 15.5 5 15.5 5
ETPW - 5 J, K, L 8.6 12.5 5.0 0.5 15.5 5 - -
ETPW - 6 M, N 9.5 15.0 5.0 0.5 18.0 5 - -
ETPW - 6 P, R 9.5 16.0 5.0 0.5 19.0 5 - -
Basic version
H
RM ± 0.5
D
15 ± 5
D
Ø d
Form DS
H
2
D
1.1 ± 0.1
4.5 ± 1.5
RM ± 0.5
Form L
H
2
5.5 ± 0.5
RM ± 0.5
D
ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 2Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
CR
(μF)
RATED VOLTAGE UR AT + 85 °C
3.0 V 6.3 V 10 V 16 V 25 V 35 V 50 V
0.10 1A 1A
0.15 1A 1A
0.22 1A 1A
0.33 1A 1B
0.47 1A 1B
0.68 1A 2C
1.0 1A 1A 2D
1.5 1A 1B 2E
2.2 1A 1B 2C 3F
3.3 1A 1B 2C 2D 3G
4.7 1A 1B 2C 2D 2E 4H
6.8 1A 1B 2C 2D 2E 3F 5J
10 1A 2C 2D 2E 3F 3G 5L
15 1B 2D 2E 3F 4H 5J 6M
22 2C 2E 3F 3G 5J 5L 6P
33 2D 3F 3G 4H 5K 6M
47 2E 3G 4H 5K 6M 6P
68 3F 4H 5J 5L 6N
100 3G 5J 5L 6N
150 4H 5L 6N 6R
220 5J 6M 6P
330 5L 6P
470
STANDARD RATINGS
CR
(μF)
CASE
CODE PART NUMBER
DIMENSIONS MAX. DCL
AT + 20 °C
(μA)
MAX. Z
AT 100 kHz
()
MAX. DF
AT 120 Hz
+ 20 °C
D MAX.
(mm)
H MAX.
(mm)
H2 MAX.
(mm)
RM
± 0.05
d
± 0.05
UR = 3 VDC AT + 85 °C, SURGE = 3.9 V; UC = 2 VDC AT + 125 °C
6.8 1A P1A685003(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 6.0 0.06
10 1A P1A106003(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 5.0 0.08
15 1B P1B156003(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 4.0 0.08
22 2C P2C226003(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.7 3.2 0.08
33 2D P2D336003(1)(2)D 4.5 8.0 11.0 2.5 0.5 1.0 2.5 0.08
47 2E P2E476003(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.4 2.0 0.08
68 3F P3F686003(1)(2)D 5.0 9.5 12.5 2.5 0.5 2.0 1.6 0.08
100 3G P3G107003(1)(2)D 5.5 10.0 13.0 2.5 0.5 3.0 1.2 0.10
150 4H P4H157003(1)(2)D 6.0 10.0 13.0 2.5 0.5 4.5 1.0 0.10
220 5J P5J227003(1)(2)D 8.6 12.5 15.5 5.0 0.5 6.6 0.8 0.10
330 5L P5L337003(1)(2)D 8.6 12.5 15.5 5.0 0.5 9.9 0.6 0.10
Note
• Part number definitions:
(1) Insert M for ± 20 % tolerance or K for ± 10 %
(2) Lead style and packaging code, see Lead Styles and Packaging table
ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 3Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
UR = 6.3 VDC AT + 85 °C, SURGE = 7.8 V; UC = 4 VDC AT + 125 °C
4.7 1A P1A475603(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 6.0 0.06
6.8 1B P1B685603(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 5.0 0.06
10 2C P2C106603(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.6 4.0 0.08
15 2D P2D156603(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.9 3.2 0.08
22 2E P2E226603(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.4 2.5 0.08
33 3F P3F336603(1)(2)D 5.0 9.5 12.5 2.5 0.5 2.1 2.0 0.08
47 3G P3G476603(1)(2)D 5.5 10.0 13.0 2.5 0.5 3.0 1.6 0.08
68 4H P4H686603(1)(2)D 6.0 10.0 13.0 2.5 0.5 4.3 1.2 0.08
100 5J P5J107603(1)(2)D 8.6 12.5 15.5 2.5 0.5 6.3 1.0 0.10
150 5L P5L157603(1)(2)D 8.6 12.5 15.5 5.0 0.5 9.5 0.8 0.10
220 6M P6M227603(1)(2)D 9.5 15.0 18.0 5.0 0.5 13.9 0.6 0.10
330 6P P6P337603(1)(2)D 9.5 16.0 19.0 5.0 0.5 20.8 0.5 0.10
UR = 10 VDC AT + 85 °C, SURGE = 13 V; UC = 6.3 VDC AT + 125 °C
3.3 1A P1A335010(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 6.5 0.06
4.7 1B P1B475010(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 5.0 0.06
6.8 2C P2C685010(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.7 4.0 0.06
10 2D P2D106010(1)(2)D 4.5 8.0 11.0 2.5 0.5 1.0 3.2 0.08
15 2E P2E156010(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.5 2.5 0.08
22 3F P3F226010(1)(2)D 5.0 9.5 12.5 2.5 0.5 2.2 2.0 0.08
33 3G P3G336010(1)(2)D 5.5 10.0 13.0 2.5 0.5 3.3 1.6 0.08
47 4H P4H476010(1)(2)D 6.0 10.0 13.0 2.5 0.5 4.7 1.2 0.08
68 5J P5J686010(1)(2)D 8.6 12.5 15.5 2.5 0.5 6.8 1.0 0.08
100 5L P5L107010(1)(2)D 8.6 12.5 15.5 5.0 0.5 10.0 0.8 0.10
150 6N P6N157010(1)(2)D 9.5 15.0 18.0 5.0 0.5 15.0 0.6 0.10
220 6P P6P227010(1)(2)D 9.5 16.0 19.0 5.0 0.5 22.0 0.5 0.10
UR = 16 VDC AT + 85 °C, SURGE = 20.8 V; UC = 10 VDC AT + 125 °C
2.2 1A P1A225016(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 7.0 0.06
3.3 1B P1B335016(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 6.0 0.06
4.7 2C P2C475016(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.8 4.5 0.06
6.8 2D P2D685016(1)(2)D 4.5 8.0 11.0 2.5 0.5 1.1 3.2 0.06
10 2E P2E106016(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.6 2.5 0.08
15 3F P3F156016(1)(2)D 5.0 9.5 12.5 2.5 0.5 2.4 2.0 0.08
22 3G P3G226016(1)(2)D 5.5 10.0 13.0 2.5 0.5 3.5 1.6 0.08
33 4H P4H336016(1)(2)D 6.0 10.0 13.0 2.5 0.5 5.3 1.2 0.08
47 5K P5K476016(1)(2)D 8.6 12.5 15.5 2.5 0.5 7.5 1.0 0.08
68 5L P5L686016(1)(2)D 8.6 12.5 15.5 5.0 0.5 10.9 0.8 0.08
100 6N P6N107016(1)(2)D 9.5 15.0 18.0 5.0 0.5 16.0 0.6 0.10
150 6R P6R157016(1)(2)D 9.5 16.0 19.0 5.0 0.5 24.0 0.5 0.10
STANDARD RATINGS
CR
(μF)
CASE
CODE PART NUMBER
DIMENSIONS MAX. DCL
AT + 20 °C
(μA)
MAX. Z
AT 100 kHz
()
MAX. DF
AT 120 Hz
+ 20 °C
D MAX.
(mm)
H MAX.
(mm)
H2 MAX.
(mm)
RM
± 0.05
d
± 0.05
Note
• Part number definitions:
(1) Insert M for ± 20 % tolerance or K for ± 10 %
(2) Lead style and packaging code, see Lead Styles and Packaging table
ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 4Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
UR = 25 VDC AT + 85 °C, SURGE = 32.5 V; UC = 16 VDC AT + 125 °C
1.0 1A P1A105025(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 8.5 0.04
1.5 1A P1A155025(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 7.5 0.04
2.2 1B P1B225025(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.6 6.0 0.06
3.3 2C P2C335025(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.8 4.5 0.06
4.7 2D P2D475025(1)(2)D 4.5 8.0 11.0 2.5 0.5 1.2 3.2 0.06
6.8 2E P2E685025(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.7 2.5 0.06
10 3F P3F106025(1)(2)D 5.0 9.5 12.5 2.5 0.5 2.5 2.0 0.08
15 4H P4H156025(1)(2)D 6.0 10.0 13.0 2.5 0.5 3.8 1.6 0.08
22 5J P5J226025(1)(2)D 8.6 12.5 15.5 2.5 0.5 5.5 1.2 0.08
33 5K P5K336025(1)(2)D 8.6 12.5 15.5 5.0 0.5 8.3 1.0 0.08
47 6M P6M476025(1)(2)D 9.5 15.0 18.0 5.0 0.5 11.8 0.8 0.08
68 6N P6N686025(1)(2)D 9.5 15.0 18.0 5.0 0.5 17.0 0.6 0.08
UR = 35 VDC AT + 85 °C, SURGE = 45.5 V; UC = 23 VDC AT + 125 °C
0.10 1A P1A104035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 38.0 0.04
0.15 1A P1A154035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 30.0 0.04
0.22 1A P1A224035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 23.0 0.04
0.33 1A P1A334035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 18.0 0.04
0.47 1A P1A474035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 14.0 0.04
0.68 1A P1A684035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 10.0 0.04
1.0 1A P1A105035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 8.0 0.04
1.5 1B P1B155035(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 6.5 0.04
2.2 2C P2C225035(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.8 5.0 0.06
3.3 2D P2D335035(1)(2)D 4.5 8.0 11.0 2.5 0.5 1.2 3.5 0.06
4.7 2E P2E475035(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.6 2.5 0.06
6.8 3F P3F685035(1)(2)D 5.0 9.5 12.5 2.5 0.5 2.4 2.0 0.06
10 3G P3G106035(1)(2)D 5.5 10.0 13.0 2.5 0.5 3.5 1.6 0.08
15 5J P5J156035(1)(2)D 8.6 12.5 15.5 5.0 0.5 5.3 1.2 0.08
22 5L P5L226035(1)(2)D 8.6 12.5 15.5 5.0 0.5 7.7 1.0 0.08
33 6M P6M336035(1)(2)D 9.5 15.0 18.0 5.0 0.5 11.6 0.8 0.08
47 6P P6P476035(1)(2)D 9.5 16.0 19.0 5.0 0.5 16.5 0.8 0.08
UR = 50 VDC AT + 85 °C, SURGE = 65 V; UC = 33 VDC AT + 125 °C
0.10 1A P1A104050(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 38.0 0.04
0.15 1A P1A154050(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 30.0 0.04
0.22 1A P1A224050(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 23.0 0.04
0.33 1B P1B334050(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 18.0 0.04
0.47 1B P1B474050(1)(2)D 4.0 7.1 10.5 2.5 0.5 0.5 14.0 0.04
0.68 2C P2C684050(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.5 10.0 0.04
1.0 2D P2D105050(1)(2)D 4.5 8.0 11.0 2.5 0.5 0.5 8.0 0.04
1.5 2E P2E155050(1)(2)D 5.0 9.5 12.5 2.5 0.5 0.8 6.5 0.04
2.2 3F P3F225050(1)(2)D 5.0 9.5 12.5 2.5 0.5 1.1 5.0 0.06
3.3 3G P3G335050(1)(2)D 5.5 10.0 13.0 2.5 0.5 1.7 3.5 0.06
4.7 4H P4H475050(1)(2)D 6.0 10.0 13.0 2.5 0.5 2.4 2.5 0.06
6.8 5J P5J685050(1)(2)D 8.6 12.5 15.5 5.0 0.5 3.4 2.0 0.06
10 5L P5L106050(1)(2)D 8.6 12.5 15.5 5.0 0.5 5.0 1.6 0.08
15 6M P6M156050(1)(2)D 9.5 15.0 18.0 5.0 0.5 7.5 1.2 0.08
22 6P P6P226050(1)(2)D 9.5 16.0 19.0 5.0 0.5 11.0 1.0 0.08
STANDARD RATINGS
CR
(μF)
CASE
CODE PART NUMBER
DIMENSIONS MAX. DCL
AT + 20 °C
(μA)
MAX. Z
AT 100 kHz
()
MAX. DF
AT 120 Hz
+ 20 °C
D MAX.
(mm)
H MAX.
(mm)
H2 MAX.
(mm)
RM
± 0.05
d
± 0.05
Note
• Part number definitions:
(1) Insert M for ± 20 % tolerance or K for ± 10 %
(2) Lead style and packaging code, see Lead Styles and Packaging table
ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 5Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PERFORMANCE CHARACTERISTICS
1. Climatic Category: 55/125/56 according to IEC
2. Temperature Range: - 55 °C up to + 125 °C with linear
voltage derating to category voltage UC
3. Rated Voltage, Category Voltage:
3 V to 50 V; 2 V to 33 V
4. Surge Voltage: 1.3 times of rated voltage at + 85 °C
5. Reverse Voltage (Temporary):
15 % of the rated DC voltage at + 20 °C
10 % of the rated DC voltage at + 55 °C
5 % of the rated DC voltage at + 85 °C
6. Rated Capacitance: 0.1 μF to 330 μF
7. Capacitance Tolerance: ± 20 %, ± 10 %
8. Leakage Current in μA: Measured at + 20 °C after
5 min: 0.01 x CR x UR or 0.5 μA, whichever is greater
9. Dissipation Factor: At 120 Hz and + 20 °C
See table
10. Impedance: Measured at 100 kHz and + 20 °C
See table
11. Permissible AC Voltage Stress: The highest
permissible AC voltage for the respective frequency
may be taken from the brochure “General Information”.
The values apply for + 20 °C For higher temperatures,
the values have to be multiplied with the following
factors:
Intermediate values can be obtained by linear
interpolation.
For further notes on AC voltage stress: See general
information
12. Service life: > 300 000 h (1)
13. Failure percentage: 0.6 % within 100 000 h (1)
14. Failure rate (): 0.6 10- 7/h = 60 fit (1)
15. Failure criteria: Catastrophic failure: Short circuit or
interruption
Drift failure: DC/C > + 5 % - 15 %
Z > 3 times initial limit value
IR > 5 times initial value + 5 μA
Note
(1) Related to UR, + 40 °C and a circuit resistance of 3 /V
16. Characteristics at high and low temperatures (the values shall not exceed the following limits)
Note
(1) Measured at category voltage
TEMPERATURE FACTOR
+ 50 °C 0.7
+ 85 °C 0.5
+ 125 °C 0.3
TEST TEMPERATURE - 55 °C + 20 °C + 85 °C + 125 °C
C/C <
tan
1.5 μF
< 10 μF
< 100 μF
100 μF
- 10 %
0.04
0.06
0.08
0.10
-
0.04
0.06
0.08
0.10
+ 12 %
0.04
0.06
0.08
0.10
+ 15 %
0.06
0.08
0.08
0.10
Leakage current IR -
0.01 x CR x UR
or 0.5 μA
whichever is greater
0.1 x CR x UR
or 10 μA
whichever is greater
0.125 x CR x UR
or 12.5 μA
whichever is greater (1)
ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 6Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) 100 μF - 6.3 V, 68 μF - 10 V, 47 μF - 16 V, 22 μF - 25 V
LEAD STYLES AND PACKAGING
CASE SIZE CODE RM IN mm
± 0.5 SPECIFICATION REMARKS
1 - 6 00 2.5/5 Bulk
Reel with
positive pole in
tape run
direction in
front is
standard
1 - 4 (1) C0 5 Form L, bulk
1 - 6 V0 5 Form DS, bulk
1 - 4 (1) W0 2.5 Reel, positive pole in front of unreeling direction
1 - 4 (1) T0 2.5 Reel, negative pole in front of unreeling direction
1 - 4 (1) H0 2.5 Ammo
1 - 5 V2 5 Reel, positive pole in front of unreeling direction
1 - 5 R0 5 Reel, negative pole in front of unreeling direction
1 - 5 08 5 Ammo
CASE SIZE BULK
00, V0, C0
REEL
W0, T0, V2, R0
AMMO
H0, O8
ETPW 1 A, B 500 2500 2500
ETPW 2 C, D, E 500 2000 2000
ETPW 3 F, G 500 1500 1500
ETPW 4 H 500 1500 1500
ETPW 5 J, K, L 100 500 500
ETPW 6 M, N, P, R 100 - -
Reel packaging
Card board
Protective tape
Innerlayer paper
Clamp
TAPED
PARTS
Ammo packaging (mm)
191 - 201
41 - 45
320 - 330
ETPW
www.vishay.com Vishay Sprague
Revision: 09-Sep-09 7Document Number: 42074
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Also available: 16 mm and 20 mm taping according to DIN-IEC 286 part 2
TAPING according to IEC 286-2
DESIGNATION SYMBOL DIMENSIONS (mm)
Holding tape width W 18.0 (+ 1/- 0.5)
Adhesive tape width W0 Min. 5.0
Distance of components P 12.7 ± 1
Hole center to component center P2 6.35 ± 1.3
Hole center to lead P1 5.1/3.8 ± 0.7
Distance of body to hole center H (1) 18.0 (+ 2/- 0)
Distance of lead to hole center H0 16.0 ± 0.5
Component upper edge to hole center H1 Max. 32.0
Adhesive tape location W2 Max. 3.0
Hole location W1 9.0 (+ 0.75/- 0.5)
Distance of holes P0 12.7 ± 0.3
Hole diameter D0 4.0 ± 0.3
Lead diameter d 0.5 ± 0.05
Component alignment h Max. ± 2.0
Pitch F 2.5/5.0 (+ 0.6/- 0.1)
Holding tape thickness t 0.5 ± 0.2
Component alignment P Max. ± 1.3
Length of snipped leads L Max. 11.0
h
W2
D0
H0
W0
W1W
t
P1
P2
H2
F
PP
P2P
P1F
P0
L
H
Unreeling direction
Dimensions for components on tape and tolerances:
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
