Toll free: 1-888-783-4611 (US & Canada only) * www.stegousa.com www.stegousa.com DOOR SWITCH DS 013 >>Tool-free adjustable switch positioning >>Strain relief, suitable for range of cable diameters >>High switching capacity >>Suitable for lamp LED 025 and other devices TECHNICAL DATA Max. switching capacity 10 A resistive / 1.5 A inductive @ AC 250 V Service life VDE: > 10,000 cycles UL: > 6,000 cycles Connection 4-pole clamp with strain relief, clamping torque 0.5 Nm max. Housing plastic according to UL 94V-0, grey/black Mounting M5 screws (not included) Mounting position variable Operating / Storage temperature -4 to +185 F (-20 to +85 C) Operating / Storage humidity max. 90 %RH (non-condensing) Dimensions 3.4 x 2.5 x 1.2" (87 x 64 x 30 mm) Weight approx. 1.8 oz. (50 g) Protection type IP20 Approvals UL + VDE intended Wiring diagrams Part No. Model Suitable wire 01350.0-00 change-over (CO) Round cable, stranded wire (with wire end ferrule) AWG 18 to 17 (0.75 mm to 1 mm) 01351.0-00 normally closed (NC) Round cable, stranded wire (with wire end ferrule) AWG 18 to 16 (0.75 mm to 1.5 mm) 01352.0-00 normally open (NO) Round cable, stranded wire (with wire end ferrule) AWG 18 to 16 (0.75 mm to 1.5 mm) 08.08.2014 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. The door switch monitors the position of cabinet doors and is available in three versions. For example, it can be used for switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version with change-over contact (CO) can be used as a normally closed and/or normally open contact. The wide mechanical adjustment range of the door switch DS 013 offers versatile mounting: the housing is adjustable within a 1-3/8" (35 mm) range, while the screw flange with a slotted hole offers an additional 13/16" (21 mm). The travel of the switch itself is another 5/16" (8 mm).