> Tool-free adjustable switch positioning
> Strain relief, suitable for range of cable
diameters
> High switching capacity
> Suitable for lamp LED 025
and other devices
The door switch monitors the position of cabinet doors and is available in three versions. For example, it can be
used for switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version
with change-over contact (CO) can be used as a normally closed and/or normally open contact. The wide mecha-
nical adjustment range of the door switch DS 013 offers versatile mounting: the housing is adjustable within a
1-3/8" (35 mm) range, while the screw flange with a slotted hole offers an additional 13/16" (21 mm). The travel
of the switch itself is another 5/16" (8 mm).
Wiring diagrams
TECHNICAL DATA
Max. switching capacity 10 A resistive / 1.5 A inductive @ AC 250 V
Service life VDE: > 10,000 cycles
UL: > 6,000 cycles
Connection 4-pole clamp with strain relief, clamping torque 0.5 Nm max.
Housing plastic according to UL 94V-0, grey/black
Mounting M5 screws (not included)
Mounting position variable
Operating / Storage temperature -4 to +185 °F (-20 to +85 °C)
Operating / Storage humidity max. 90 %RH (non-condensing)
Dimensions 3.4 x 2.5 x 1.2" (87 x 64 x 30 mm)
Weight approx. 1.8 oz. (50 g)
Protection type IP20
Approvals UL + VDE intended
Part No. Model Suitable wire
01350.0-00 change-over (CO) Round cable, stranded wire (with wire end ferrule) AWG 18 to 17 (0.75 mm² to 1 mm²)
01351.0-00 normally closed (NC) Round cable, stranded wire (with wire end ferrule) AWG 18 to 16 (0.75 mm² to 1.5 mm²)
01352.0-00 normally open (NO) Round cable, stranded wire (with wire end ferrule) AWG 18 to 16 (0.75 mm² to 1.5 mm²)
DOOR SWITCH
DS 013
www.stegousa.com08.08.2014 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
