MAPDCC0010 - M/A-COM Technology Solutions, Inc.

Low Cost Two-Way GMIC SMT Power Divider,

2200 - 2500 MHz

Rev. V2

MAPDCC0010

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Small Size and Low Profile

• Typical Insert ion Loss: 1.0 dB

• Typical Amplit ude Balance: 0.1 dB

• 1 Watt Power Handling

• Lead-Free SOT-25 Package

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• 260°C Reflow Compatible

• RoHS* Compliant Version of DS52-0007

Description

M/A-COM’s MAPDCC0010 is an IC-based mono-

lithic power divider using M/A-COM’s GMIC technol-

ogy in a low cost SOT-25 plastic package. This 2-

way power divider is ideally suited for applications

where small size, low insertion loss, superior phase/

amplitude tracking and low cost are required. Typi-

cal applications include handsets, base station

switching networks and other communication appli-

cations where size and PCB real estate are at a

premium. Available in Tape and Reel.

The MAPDCC0010 is fabricated using a passive-

integrated circuit process. The process features full-

chip passivation for increased performance and reli-

ability.

Ordering Information

Part Number Package

MAPDCC0010 Bulk Packaging

MAPDCC0010-TR 1000 piece reel

MAPDCC0010-TB Sample Test Board

Note: Reference Application Note M513 for reel size

information.

Pin Configuration

Pin No. Function

1 RF1 (OUT)

2 GND

3 RF2 (OUT)

4 GND

5 RF IN

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Functional Block Diagram

RF IN

GND

RF1

(Out) GND

RF2

(Out)

Low Cost Two-Way GMIC SMT Power Divider,

2200 - 2500 MHz

Rev. V2

MAPDCC0010

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications: TA = 25°C, Z0 = 50 Ω

Parameter Frequency Units Min Typ Max

Insertion Loss

(above 3.0 dB theoretical loss) 2200 - 2500 MHz dB — 1.0 1.1

Isolation 2200 - 2500 MHz dB 15 22 —

Input VSWR 2200 - 2500 MHz Ratio — 1.6:1 1.8:1

Output VSWR 2200 - 2500 MHz Ratio — 1.3:1 1.5:1

Amplitude Balance 2200 - 2500 MHz dB — 0.1 —

Phase Balance 2200 - 2500 MHz ° — 2 —

Recommended PCB Configuration

Absolute Maximum Ratings 1,2

Parameter Absolute Maximum

Input Power 3 1 W CW

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

1. Exceeding any one or combination of these limits may cause

permanent damage to this device.

2. M/A-COM does not recommend sustained operation near

these survivability limits.

3. With internal load dissipation of 0.125 W maximum.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC Circuits are sensitive to electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these device s.

Dimensions in inches.

Circuit Material: FR-4, .016 Thick.

Low Cost Two-Way GMIC SMT Power Divider,

2200 - 2500 MHz

Rev. V2

MAPDCC0010

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Isolation vs. Frequency

VSWR vs. Frequency

Typical Performance Curves @ 25ºC

Insertion Loss vs. Frequen cy

0.0

0.5

1.0

1.5

2200 2275 2350 2425 2500

Frequency (M Hz)

Inse rtion Loss (d B)

2200 2275 2350 2425 2500

Frequency (M Hz)

Isolation (dB)

1.0

1.2

1.4

1.6

1.8

2.0

2200 2275 2350 2425 2500

Fre quency (MHz)

VSWR

Input Output

Lead-Free, SOT-25†

† Reference Application Note M538 for lead-free solder reflow

recommendations.