Terminal Blocks Screw clamp technology he choice ofTerminal ADOblocks System Entrelec by ABB have over 50 years experience in screw rminalclamp blocks connections. A standard system produced in billions of models, Spring techonlogy Screw clampclamp connection technology The benefits of screw clamp technology: Safety! The front connection The connection's reliability and long life are ensured by: * The excellent contact press provided by the steel clamp * High resistance to corrosion offered by dichromate zinc surface treatment * Any conductor creep compensated by the resilience of the clamp * High resistance to thread destruction, as the threads are approximately 30% longer than on traditional clamps ABB clamp Clamps are made from hardened steel and are anti-corrosion treated. They combine strength and resistance to external attack (high resistance to saline mists) and comply with IEC 68.2.34 standard. Screw Clamp terminal blocks this technology can be found on a very wide range of products. Simplicity Screw connections are used on all types of products and are recognized by all users. They can also be used for connection flexible conductors of up to 240mm2 without ferrules. Security: Non Symmetrical blocks Prevent risk of short-circuit between two blocks due to mounting errors. Further more the locking pin reduces dramatically the risk of reversal as all blocks are attached in the right way. Screw clamp terminal blocks are: Flexible * Large wire range (up to 300mm2) * Connection of solid or stranded wires (with or without ferrules) * Two identical wires (maximum) per clamp * Flat bottom design to accept small wires (<0.2mm2) Screw clamp range * Most popular: 5mm to 16mm spacing * Same profile: Esthetic/functional * Only one end plate for the four most popular sizes * Multi profile rail - TS35/F6, TS35/CF6, TS32, etc. The Benefits * Anti-corrosion treated * Unique anti-release system * Same profile - four popular sizes * Locking pin Locking pin * Simple and rapid to use for locking up to ten blocks in position at a time 1 * Improved storage 2 * Does not prevent individual blocks from being removed 3 * Eliminates any risk of mistake during assembly Screw Clamp terminal blocks 1 2 3 Multi-function channels Labeling With the central multifunction channel, test plugs and jumpers bars and labeling can be put in place. Blocks can be identified using preprinted or custom made markers. Insulating material Alignment * Insulating material is in a polyamide and contains no asbestos, cadmium, phosphor or halogen elements * Manufactured to the highest standards (thermal resistance from -40 to +110C) and with its self-extinguishing capacities it complies with European directives (incandescent wire resistance in compliance with IEC standard 06095.2.11) * Available in a wide variety of colors Blocks are positioned side-by-side for an aesthetic and functional final set-up that only requires one type of flange. The blocks are slightly asymmetrical to avoid any mistake when mounting on DIN rail. ABB Inc. 1206 Hatton Road Wichita Falls, TX 76302 Telephone 888-385-1221; 940-397-7000 Fax 940-397-7085 http://www.abb.us/controlproducts RECOMMENDED STOCKING PACKAGES SCREW CONNECTION PART DISTR MIN NUMBER DESCRIPTION PURCHASE 011511607 M4/6 TERMINAL 500 011511811 M6/8 TERMINAL 500 011512017 M10/10 TERMINAL 250 011836816 END SECTION FEM6 100 016511316 M4/6P TERMINAL 50 016511417 M4/8P TERMINAL 50 010306221 END SECTION FEM6 YELLOW 20 011512407 M35/16 TERMINAL 20 011823327 END SECTION FEM16 20 011512914 M16/12 TERMINAL 20 011861801 END SECTION FEM12 20 011527122 M4/6.D2 TERMINAL 50 011849923 END SECTION FEM6D 20 011565725 M4/8SF 50 011566121 M4/8SFL 50 011566323 M4/8SFD 50 011695115 FEM6S END SECTION 20 019909513 ML10/13SF 20 019916800 ML10/13SFL 110/230V 20 019963524 FEM 13U END SECTION 10 011643813 DL10/17.5SF 10 035620021 BRU160A DIST BLOCK 1 035620411 BRU125A DIST BLOCK 1 035620926 BRT115A 3 POLE DIST BLOCK 1 035621021 BRT175A 3 POLE DIST BLOCK 1 Publication LV107 No. 1SXU 160 107 L0201 Printed in USA, March 2008