Screw Clamp
terminal blocks
The choice of ADO System
terminal blocks
Entrelec Terminal blocks by ABB have over 50 years experience in screw
clamp connections. A standard system produced in billions of models,
this technology can be found on a very wide range of products.
Screw clamp terminal blocks are: Flexible
• Large wire range (up to 300mm2)
• Connection of solid or stranded wires (with or without ferrules)
• Two identical wires (maximum) per clamp
• Flat bottom design to accept small wires (<0.2mm2)
Screw clamp range
• Most popular: 5mm to 16mm spacing
• Same prole: Esthetic/functional
• Only one end plate for the four most popular sizes
• Multi prole rail – TS35/F6, TS35/CF6, TS32, etc.
Spring clamp techonlogy
The front connection
Screw clamp connection technology
The benets of screw clamp technology: Safety!
The connection's reliability and long life are ensured by:
• The excellent contact press provided by the steel clamp
• High resistance to corrosion offered by dichromate zinc surface treatment
• Any conductor creep compensated by the resilience of the clamp
• High resistance to thread destruction, as the threads are approximately
30% longer than on traditional clamps
Terminal Blocks
Screw clamp technology
ABB clamp
Clamps are made from hardened steel and are anti-corrosion treated.
They combine strength and resistance to external attack (high
resistance to saline mists) and comply with IEC 68.2.34 standard.
Simplicity
Screw connections are used on all types of
products and are recognized by all users.
They can also be used for connection
exible conductors of up to 240mm2
without ferrules.
Security:
Non Symmetrical blocks
Prevent risk of short-circuit between two
blocks due to mounting errors. Further more the locking pin reduces
dramatically the risk of reversal as all blocks are attached in the right way.
The Benefits
• Anti-corrosion
treated
• Unique anti-release
system
• Same prole – four
popular sizes
• Locking pin
ABB Inc.
1206 Hatton Road
Wichita Falls, TX 76302
Telephone 888-385-1221; 940-397-7000
Fax 940-397-7085
http://www.abb.us/controlproducts
Publication LV107
No. 1SXU 160 107 L0201
Printed in USA, March 2008
Screw Clamp
terminal blocks
RECOMMENDED STOCKING PACKAGES
SCREW CONNECTION
PART
NUMBER DESCRIPTION
DISTR MIN
PURCHASE
011511607 M4/6 TERMINAL 500
011511811 M6/8 TERMINAL 500
011512017 M10/10 TERMINAL 250
011836816 END SECTION FEM6 100
016511316 M4/6P TERMINAL 50
016511417 M4/8P TERMINAL 50
010306221 END SECTION FEM6 YELLOW 20
011512407 M35/16 TERMINAL 20
011823327 END SECTION FEM16 20
011512914 M16/12 TERMINAL 20
011861801 END SECTION FEM12 20
011527122 M4/6.D2 TERMINAL 50
011849923 END SECTION FEM6D 20
011565725 M4/8SF 50
011566121 M4/8SFL 50
011566323 M4/8SFD 50
011695115 FEM6S END SECTION 20
019909513 ML10/13SF 20
019916800 ML10/13SFL 110/230V 20
019963524 FEM 13U END SECTION 10
011643813 DL10/17.5SF 10
035620021 BRU160A DIST BLOCK 1
035620411 BRU125A DIST BLOCK 1
035620926 BRT115A 3 POLE DIST BLOCK 1
035621021 BRT175A 3 POLE DIST BLOCK 1
Locking pin
• Simple and rapid to use for locking up to ten blocks in position at a time 1
• Improved storage 2
• Does not prevent individual blocks from being removed 3
• Eliminates any risk of mistake during assembly
Labeling
Blocks can be identied using pre-
printed or custom made markers.
Multi-function channels
With the central multifunction channel, test plugs
and jumpers bars and labeling can be put in place.
2 31
Insulating material
• Insulating material is in a polyamide and contains
no asbestos, cadmium, phosphor or halogen
elements
• Manufactured to the highest standards (thermal
resistance from –40 to +110°C) and with its
self-extinguishing capacities it complies with
European directives (incandescent wire resistance
in compliance with IEC standard 06095.2.11)
• Available in a wide variety of colors
Alignment
Blocks are positioned side-by-side
for an aesthetic and functional nal
set-up that only requires one type
of ange. The blocks are slightly
asymmetrical to avoid any mistake
when mounting on DIN rail.