Call 800-678-0141 or visit us at www.amphenol-aerospace.com
Notice: Specications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Ofce for the latest specications. All statements, information and data given herein are
believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our
products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other
measures may not be required. Specications are typical and may not apply to all connectors.
Amphenol
Aerospace
Call 800-678-0141 Product Data Sheet
PDS-215-1
AMPHENOL is a registered trademark of Amphenol Corporation.
1
Amphenol now offers differential twinax transition adapters in smaller
sizes that provide matched impedance interconnection to PCB boards.
Our unique push-pull quick disconnect adapter design offers:
Advantages over traditional threaded type adapters•
Launching of controlled impedance (100 ohm) signals for •
high speed twinax contacts with push-pull quick disconnect coupling
Rugged construction, 100+ mating cycles for reliable and secure •
data transmission
Miniature size for tighter spacing on boards•
Intermountability with existing threaded solutions having the same •
PCB tail footprint
Styles include: •
• Plug - standard length and extended length options
• Straight PCB receptacle, 90° PCB receptacle
• Two jam nut receptacle styles - both with standard length and extended length options
• Bushing assembly 90° adapter (used with plug or jam nut receptacle)
Push-Pull Quick Disconnect Interconnects
Micro D-Twinax Transition Adapters
Micro D-Twinax Transition Adapter Plug
.245 DIA.
REF .
.719 REF.
Micro D-Twinax Transition Adapters
Shown right: Straight receptacle mated to plug
Shown left: Jam nut and 90° receptacles
Part Number Cable Type* Impedance
(Ohms)
21-033832-151 Calmont 3007-1923-12-7
10021-033832-161 Tensolite 26453/03184X-2LD
Thermax 956-626Z
21-033832-121** Calmont 3007-1923-12-7
* See page 3 for information on other cable terminations.
** Same as -151 with extended ferrule for added cable support
Micro D-Twinax Transition Adapter Straight PCB Receptacle
Part Number Impedance
(Ohms)
21-033833-191 100
Straight receptacle
mated to plug
.290 DIA.
REF .
.433 REF.
.110 REF .
.0223 ±.0010 SQUARE
OR
.0290 ±.0010 DIA. ROUND
PCB T A ILS, 4 PLACES
.020 ±.001 DIA.
PCB T A ILS
2 PLACES
.100
.100
.050
2010 Amphenol Corporation Printed in U.S.A. 11/3/2010
All dimensions for reference only.
Call 800-678-0141 Product Data Sheet
PDS-215-1
Amphenol
Aerospace
Call 800-678-0141 or visit us at www.amphenol-aerospace.com
2
Push-Pull Quick Disconnect Interconnects
Micro D-Twinax Transition Adapters
Micro D-Twinax Transition Adapter 90° PCB Receptacle
Part Number Impedance
(Ohms)
21-033833-201
100
21-033833-281
.140 PCB tail length
.0223 .0010 SQUARE
OR
.0290 ±.0010 DIA. ROUND
PCB T A ILS, 4 PLACES
.020 ±.001 DIA.
PCB T A ILS 2 PLACES
.100
.110 REF .
.100
.050
.305
REF .
.244
REF .
.484
REF .
Micro D-Twinax Transition Adapter Jam Nut Receptacles
Part Number Cable Type* Impedance
(Ohms)
21-033833-241 Calmont 3007-1923-12-7
10021-033833-261 Tensolite 26453/03184X-2LD
Thermax 956-626Z
21-033833-211** Calmont 3007-1923-12-7
* See page 3 for information on other cable terminations.
** Same as -241 with extended ferrule for added cable support
90 Degree receptacle
mated to plug
Jam Nut Receptacle, Style 1
Smaller diameter front shell requires a smaller mounting D-hole
dimension in panel.
Part Number Cable Type* Impedance
(Ohms)
21-033833-251 Calmont 3007-1923-12-7
10021-033833-271 Tensolite 26453/03184X-2LD
Thermax 956-626Z
21-033833-231** Calmont 3007-1923-12-7
* See page 3 for information on other cable terminations.
** Same as -251 with extended ferrule for added cable support
.235
FLAT
MAX.
.559 REF. .405 REF.
.200
PANEL
MAX.
.250-36 UNS-24
THREAD
.3125 HEX NUT
LOCK WASHER
.3125 HEX
Jam nut receptacle,
Style 1, mated to plug
Jam nut receptacle,
Style 2, mated to plug
.339
FLAT
MAX.
.545 REF.
.450 DIA. REF.
2 PLACES
.405 REF .
.150
P A NEL
MAX.
.375-24 UNS-2A
THREAD
.425 HEX NUT
LOCK WASHER
.425 HEX
All dimensions for reference only.
Jam Nut Receptacle, Style 2
Has a larger diameter front shell than Style 1. Requires a larger
mounting D-hole in panel.
Call 800-678-0141 Product Data Sheet
PDS-215-1
Call 800-678-0141 or visit us at www.amphenol-aerospace.com
Amphenol
Aerospace
3
Push-Pull Quick Disconnect Interconnects
Micro D-Twinax Transition Adapters
All dimensions for reference only.
90° Bushing Assembly with Wired Micro D Plug
Transition Adapter
90° Bushing Assemblies for use with Wired Micro D
Transition Adapters
90° Bushing Assembly with Wired Micro D Jam Nut
Receptacle Transition Adapter
.531 REF.
.210
REF.
.210
REF.
.435
REF.
To facilitate tight cable bend requirements, Amphenol provides
90° bushing assemblies which convert straight plug and re-
ceptacle wired adapters into 90° wired adapters.
90° Bushing Assembly with
Jam Nut Micro D Transition
Adapter
JAM NUT RECEPTACLE
TRANSITION ADAPTER
1.264
REF .
90 BUSHING
ASSEMBLY
.563 REF .
.668 REF .
90° Bushing Assembly
Part Number
21-033425-201
90° bushing assembly is ordered separately.
Adapters are not included with bushing assembly.
Illustrations below show how the 90° bushing assembly
attaches to either a plug or a jam nut receptacle adapter.
Amphenol transition adapters are capable of terminating to additional
100 Ohm cables beyond what are listed in the charts on pages 1 and 2.
Cables need to have the following dimensions:
.0210/.011 Dia. stranded center conductor (26/30 AWG)•
.045 Dia. max. inner wire insulation•
.115 Dia. max. outer braid (round type preferred)•
.150 Dia. max. jacket•
Consult Amphenol Aerospace for other cable termination possibilities.