SBL1630CT ~ SBL1640CT DUAL SCHOTTKY
BARRIER RECTIFIERS
PRV : 30 ~ 40 Volts
Io : 16 Amperes
FEATURES :
* Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
* Dual rectifier construction, positive center tap
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* Guardring for overvoltage protection
* For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
* High temperature soldering : 250°C/10 seconds,
0.25" (6.35mm) from case
* Pb / RoHS Free
MECHANICAL DATA :
* Case : JEDEC TO-220AB molded plastic body
* Terminals: Plated leads, solderable per
MIL-STD-750 Method 2026
* Polarity: As marked
* Mounting Position: Any
* Weight : 2.24 grams (Approximately)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS ( Tc = 25 °C unless otherwise noted )
SYMBOL SBL1630CT SBL1640CT UNIT
Maximum Repetitive Peak Reverse Voltage VRRM V
Maximum Working Peak Reverse Voltage VRWM V
Maximum DC Blocking Voltage VDC V
Maximum Average Forward Rectified Current Total device
at TC = 95 °C Per leg
Peak Forward Surg Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method) Per leg
Maximum Instantaneous Forward Voltage at 8.0 A (Note 1) VFV
Maximum Instantaneous Reverse Current TC = 25 °C
Per leg at Rate DC Blocking Voltage (Note 1) TC = 100 °C
Typical Thermal Resistance (Junction to Case) Per Leg RθJC °C/W
Operating Junction and Storage Temperature Range TJ, TSTG °C
Note :
(1) Pulse test : 300 µs pluse width, 1% duty cycle
Page 1 of 2 Rev. 01 : March 7, 2006
PARAMETER
IFSM
16
8.0
30
40
28
40
250
IF(AV)
mA
50
30
21
0.55
A
A
2.0
-40 to + 125
0.5
IR
0.105(2.67)
0.095(2.41)
PIN 2
0.205(520)
0.195(4.95)
0.635(16.13)
0.625(15.87)
0.055(1.39)
0.045(1.14)
0.145(3.68)
0.135(3.43)
0.160(4.06)
0.140(3.56)
0.603(15.32)
0.573(14.55)
0.560(14.22)
0.530(13.46)
0.350(8.89)
0.330(8.39)
0.185(4.70)
0.175(4.44)
0.037(0.94)
0.027(0.68)
0.415(10.54)MAX.
0.154(3.91)DIA.
0.148(3.74)
0.113(2.87)
0.103(2.62)
PIN 1
PIN 3
CASE
0.022(0.56)
0.014(0.36)
132
TO-220AB
Dimensions in inches and ( millimeters )
Certificate TH97/10561QM Certificate TW00/17276EM
FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
0 25 50 75 100 125 150 1 10 100
CASE TEMPERATURE, (°C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL INSTANTANEOUS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
FORWARD CHARACTERISTICS PER LE
G
PER LE
G
Page 1 of 2 Rev. 01 : March 7, 2006
RATING AND CHARACTERISTIC CURVES ( SBL1630CT ~ SBL1640CT )
16
12
8
4
20
200
0
250
0
150
100
50
PEAK FORWARD SURGE
CURRENT, (A)
AVERAGE FORWARD
CURRENT, (A)
10
1.0
80
0.01
0.1
100020 4060
PERCENT OF RATED PEAK
REVERSE VOLTAGE, (%)
INSTANTANEOUS REVERSE
CURRENT, (mA)
10
1.0
INSTANTANEOUS FORWARD
CURRENT, (A)
100
TJ =TJmax
8.3 ms single half sine-wave
(JEDEC Method)
0.01
INSTANTANEOUS FORWARD
VOLTAGE, (V)
0 0.4 0.6 0.80.2
0.001
TJ = 75 °C
Resistive or Inductive Load
TJ = 25 °C
1.00.9
TJ = 25 °C
TJ = 125 °C
Pulse Width = 300 μs
1% Duty Cycle
TJ = 125 °C
0.1
1.10.70.50.30.1
Certificate TH97/10561QM Certificate TW00/17276EM