TCR3UG series
2017-09-19
1
© 2017
Toshiba Electronic Devices & Storage Corporation
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCR3UG series
Ultra low quiescent current, Fast Load Transient 300 mA CMOS Low Drop-Out Regulator in ultra
small package
1. Description
The TCR3UG series are CMOS general-purpose single-output
voltage regulators with an on/off control input, featuring ultra low
quiescent bias current and low dropout voltage.
These voltage regulators are available in fixed output voltages
between 0.8 V and 5.0 V and capable of driving up to 300 mA.
They feature Over-current protection, Thermal Shutdown function
and Auto-discharge option.
The TCR3UG series is offered in the ultra small plastic mold
package WCSP4F (0.645 mm x 0.645 mm; t 0.33 mm (max)) and
has a low dropout voltage of 155 mV (3.3 V output, IOUT = 300
mA). As small ceramic input and output capacitors 1μF can be used with the TCR3UG series, these devices
are ideal for portable applications that require high-density board assembly such as cellular phones.
2. Applications
Power IC developed for portable applications
3. Features
Ultra small package WCSP4F (0.645 mm x 0.645 mm; t 0.33 mm (max)).
Low quiescent bias current ( IB = 0.34 μA (typ.) at IOUT = 0 mA, output voltage up to 1.5 V)
High Ripple rejection ratio 70dB at 0.8 V-output
Fast Load transient response ± 60 mV at 0.8 V-output, IOUT = 1 mA 50 mA
Low Drop-Out voltage
VIN-VOUT = 155 mV (typ.) at 3.3 V-output, IOUT = 300 mA
Wide range output voltage line up ( VOUT = 0.8 to 5.0 V )
High VOUT accuracy ±1.0% ( 1.8V VOUT )
Auto-discharge (TCR3UGxxA series)/ Non-discharge (TCR3UGxxB series) line up
Overcurrent protection
Thermal Shutdown function
Inrush current protection circuit
Pull down connection between CONTROL and GND
Ceramic capacitors can be used (CIN = 1 μF, COUT =1 μF)
WCSP4F
Weight: 0.26 mg (typ.)
Start of commercial production
2017-
10
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
2
4. Absolute Maximum Ratings (Ta = 25°C)
Characteristics Symbol Rating Unit
Input voltage VIN -0.3 to 6.0 V
Control voltage VCT -0.3 to VIN + 0.3 6.0 V
Output voltage VOUT -0.3 to VIN + 0.3 6.0 V
Output current IOUT 300 mA
Power dissipation PD 800 (Note1) mW
Operation temperature range Topr 40 to 85 °C
Junction temperature Tj 150 °C
Storage temperature range Tstg 55 to 150 °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant
change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the
operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated
failure rate, etc).
Note1: Rating at mounting on a board
Glass epoxy(FR4) board dimension: 40mm x 40mm x 1.6mm, both sides of board.
Metal pattern ratio: a surface approximately 50%, the reverse side approximately 50%
Through hole : diameter 0.5mm x 24
5. Pin Assignment (top view)
1 2
A VIN VOUT
B CONTROL GND
1
2
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
3
6. List of Products Number, Output voltage and Marking
**Marking is rotated 90 degrees to the left.
Top Marking
(top view)
Example: TCR3UG08A (0.8 V output) Example: TCR3UG08B (0.8 V output)
Product No. Output voltage(V)
Auto
dis-
charge
Marking Product No. Output voltage(V)
Auto
dis-
charge
Marking**
TCR3UG08A 0.8
Yes
A TCR3UG08B 0.8
No
A
TCR3UG085A 0.85 B TCR3UG085B 0.85 B
TCR3UG09A 0.9 C TCR3UG09B 0.9 C
TCR3UG095A 0.95 D TCR3UG095B 0.95 D
TCR3UG10A 1.0 E TCR3UG10B 1.0 E
TCR3UG105A 1.05 F TCR3UG105B 1.05 F
TCR3UG11A 1.1 H TCR3UG11B 1.1 H
TCR3UG115A 1.15 J TCR3UG115B 1.15 J
TCR3UG12A 1.2 K TCR3UG12B 1.2 K
TCR3UG13A 1.3 L TCR3UG13B 1.3 L
TCR3UG135A 1.35 M TCR3UG135B 1.35 M
TCR3UG15A 1.5 N TCR3UG15B 1.5 N
TCR3UG175A 1.75 P TCR3UG175B 1.75 P
TCR3UG18A 1.8 R TCR3UG18B 1.8 R
TCR3UG185A 1.85 S TCR3UG185B 1.85 S
TCR3UG19A 1.9 T TCR3UG19B 1.9 T
TCR3UG25A 2.5 U TCR3UG25B 2.5 U
TCR3UG26A 2.6 V TCR3UG26B 2.6 V
TCR3UG27A 2.7 W TCR3UG27B 2.7 W
TCR3UG28A 2.8 X TCR3UG28B 2.8 X
TCR3UG285A 2.85 Y TCR3UG285B 2.85 Y
TCR3UG30A 3.0 0 TCR3UG30B 3.0 0
TCR3UG31A 3.1 1 TCR3UG31B 3.1 1
TCR3UG32A 3.2 2 TCR3UG32B 3.2 2
TCR3UG33A 3.3 3 TCR3UG33B 3.3 3
TCR3UG35A 3.5 4 TCR3UG35B 3.5 4
TCR3UG36A 3.6 5 TCR3UG36B 3.6 5
TCR3UG41A 4.1 9 TCR3UG41B 4.1 9
TCR3UG42A 4.2 6 TCR3UG42B 4.2 6
TCR3UG45A 4.5 7 TCR3UG45B 4.5 7
TCR3UG50A 5.0 8 TCR3UG50B 5.0 8
A
VOUT
VIN
CONTROL
A
VOUT
VIN
CONTROL
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
4
7. Electrical Characteristics
(Unless otherwise specified,
VIN = VOUT+1 V (VOUT>1.5V), VIN=2.5V (VOUT≤1.5V), IOUT = 50 mA, CIN = COUT = 1 μF)
Characteristics Symbol Test Condition
Tj = 25°C Tj = -40 to 85°C
(Note 7) Unit
Min Typ. Max Min Max
Output voltage VOUT IOUT = 50 mA
(Note 2)
VOUT < 1.8 V -18 +18 mV
1.8V ≤ VOUT -1.0 +1.0 %
Input voltage VIN IOUT = 1 mA 1.5 5.5 1.5 5.5 V
Line regulation Regline IOUT = 1 mA (Note 3) 1 15 mV
Load regulation Regload 1 mA IOUT 300 mA (Note 4) 10 30 mV
Quiescent current
IB(ON1) IOUT = 0 mA, VOUT 1.5V (Note 5) 0.34 0.58 μA
IB(ON2) IOUT = 0 mA,
1.75 V ≤ VOUT 5 V (Note 5) 0.38 0.68 μA
Stand-by current
IB (OFF1) VCT = 0 V, VIN = 2.5 V 0.03 0.16 μA
IB (OFF2) VCT = 0 V, VIN = 5.5 V 0.03 0.20 μA
Control pull down current ICT 0.1 μA
Drop-out voltage VIN-VOUT IOUT = 300 mA
VOUT = 1.8 V 335 457 mV
VOUT = 3.3 V 140 273 mV
Output noise voltage VNO
IOUT = 10 mA,
10 Hz ≤ f 100 kHz, Ta = 25°C
(Note 4)
50 μVrms
Ripple rejection ratio R.R.
IOUT = 10 mA,
f = 1 kHz, VRipple = 200 mVp-p,
Ta = 25°C (Note 4)
70 dB
Load transient response VOUT
IOUT=1mA 50mA (Note 6) -60 mV
IOUT=50mA 1mA (Note 6) +60 mV
Temperature coefficient TCVO 40°C ≤ Topr ≤ 85°C 75 ppm/°C
Control voltage (ON) VCT (ON) 1.0 5.5 1.0 5.5 V
Control voltage (OFF) VCT (OFF) 0 0.4 0 0.4 V
Discharge on resistance RSD 10 Ω
Note 2: stable state with fixed IOUT condition
Note 3: VOUT 1.5 V, 2.5 V ≤ VIN 5.5 V
1.75 V ≤ VOUT 4.2 V, VOUT + 1 V ≤ VIN 5.5 V
VOUT = 4.5 V, VOUT = 5.0 V, not applicable
Note 4: VOUT = 0.8V
Note 5: except Control pull down current (ICT)
Note 6: VOUT = 0.8V, VIN = 3.3V
Note 7: This parameter is warranted by design
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
5
Drop-out voltage
(IOUT = 300 mA, CIN = COUT = 1 μF)
Note 8: Tj = -40 to 85 °C. This parameter is warranted by design
Output voltages Symbol Min Typ.
Tj = 25°C
Max
(Note 8) Unit
0.8 V ≤ VOUT < 0.9 V
VIN-VOUT
1025 1257
mV
0.9 V ≤ VOUT < 1.0 V
930 1157
1.0 V ≤ VOUT < 1.1 V
835 1057
1.1 V ≤ VOUT < 1.2 V
740 957
1.2 V ≤ VOUT < 1.3 V
660 857
1.3 V ≤ VOUT < 1.5 V
580 757
1.5 V ≤ VOUT < 1.6 V
450 617
1.6 V ≤ VOUT < 1.8 V
400 537
1.8 V ≤ VOUT < 2.0 V
335 457
2.0 V ≤ VOUT < 2.5 V
260 405
2.5 V ≤ VOUT < 3.0 V
185 327
3.0 V ≤ VOUT < 3.6 V
140 273
3.6 V ≤ VOUT < 4.5 V
130 228
4.5 V ≤ VOUT5.0 V
120 195
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
6
8. Application Note
8.1. Recommended Application Circuit
The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a
capacitor at VOUT and VIN pins for stable input/output operation. (Ceramic capacitors can be used).
8.2. Power Dissipation
Board-mounted power dissipation ratings are available in the Absolute Maximum Ratings table.
Power dissipation is measured on the board condition shown below.
[The Board Condition]
Board material: Glass epoxy (FR4)
Board dimension: 40mm x 40mm (both sides of board), t= 1.6mm
Metal pattern ratio: a surface approximately 50%, the reverse side approximately 50%
Through hole: diameter 0.5mm x 24
CONTROL
voltage
VOUT
voltage
HIGH
ON
LOW
OFF
OPEN
OFF
VOUT
GND
VIN
CONTROL
1 μF
1 μF
Ambient temperature Ta (°C)
Power dissipation PD (mW)
40
0
0
40
120
80
200
400
600
800
1000
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
7
8.3. Attention in Use
Output Capacitors
Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there
might be unexpected thermal features. Please consider application condition for selecting capacitors. And
Toshiba recommend the ESR of ceramic capacitor is under 10 Ω.
COUT is not necessary. But for stable operation, we recommend over 0.1μF.
Mounting
The long distance between IC and output capacitor might affect phase assurance by impedance in wire
and inductor. For stable power supply, output capacitor need to mount near IC as much as possible. Also
VIN and GND pattern need to be large and make the wire impedance small as possible.
Permissible Loss
Please have enough design patterns for expected maximum permissible loss. And under consideration of
surrounding temperature, input voltage, and output current etc., we recommend proper dissipation ratings
for maximum permissible loss; in general maximum dissipation rating is 70 to 80 %.
Over current Protection and Thermal shut down function
Over current protection and Thermal shut down function are designed in these products, but these are not
designed to constantly ensure the suppression of the device within operation limits. Depending on the
condition during actual usage, it could affect the electrical characteristic specification and reliability. Also
note that if output pins and GND pins are not completely shorted out, these products might be break down.
When using these products, please read through and understand the concept of dissipation for absolute
maximum ratings from the above mention or our ‘Semiconductor Reliability Handbook’. Then use these
products under absolute maximum ratings in any condition. Furthermore, Toshiba recommend inserting
failsafe system into the design.
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
8
9. Package Information
WCSP4F Unit: mm
Figure 9.1 Package Dimensions
Weight: 0.26 mg (typ.)
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
9
Unit: mm
Land pattern dimensions for reference only
0.35
0.35
0.180
TCR3UG series
2017-09-19
© 2017
Toshiba Electronic Devices & Storage Corporation
10
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as Product”.
TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for
complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize
risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property,
including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their
own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without
limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in
the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for.
Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information
contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and
(c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS'
PRODUCT DESIGN OR APPLICATIONS.
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY
HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF
HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for
specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities,
equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic
signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to
electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO
LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable
laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR
PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2)
DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR
INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the
design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass
destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations
including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export
and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and
regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please
use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without
limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF
NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.