PDE-N1200D25B-0
IGBT MODULE
MBN1200D25B
Silicon N-channel IGBT OUTLINE DRAWING
FEATURES
* High thermal fatigue durability.
(delta Tc=70
°C,N>20,000cycles)
* low noise due to built-in free-wheeling
diode - ultra soft fast recovery diode(USFD).
*High speed,low loss IGBT module.
*Low driving power due to low input
capacitance MOS gate.
*High reliability,high durability module.
* Isolated head sink (terminal to base).
ABSOLUTE MAXIMUM RATINGS (Tc=25°C )
Item Sy mbol Unit MBN1200D25B
Collector Emitter Voltage VCES V 2,500
Gate Emitter Voltage VGES V ±20
Collector Current DC IC 1,200
1ms ICp A 2,400
Forward Current DC IF 1,200
1ms IFM A 2,400
Collector Power Dissipation Pc W 12,000
Junction Temperature Tj °C -40 ~ +125
Storage Temperature Tstg °C -40 ~ +125
Isolation Voltage VISO VRMS 5,000(AC 1 minute)
Screw Torque Terminals(M4/M8) - 2/10 (1)
Mounting(M6) -N.m 6 (2)
Notes: (1)Recommended Value 1.8±0.2/9±1N.m (2)Recommended Value 5.5±0.5N.m
CHARACTERISTICS (Tc=25°C )
Item S
y
mbol Unit Min. T
y
p. Max. Test Conditions
Collector Emitter Cut-Off Current I CES mA - - 12.0 VCE=2,500V,VGE=0V
Gate Emitter Leakage Current IGES nA - - ±500 VGE=±20V,VCE=0V
Collector Emitter Saturation Voltage VCE
(
sat
)
V - 2.9 3.7 IC=1,200A,VGE=15V
Gate Emitter Threshold Voltage VGE
(
TO
)
V 4.0 5.5 7.0 VCE=10V, IC =1,200mA
Input Capacitance Cies nF - 170 - VCE=10V,VGE=0V,f=100KHz
Rise Time t
r - 1.7 2.7 VCC=1,250V,Ic=1,200A
Turn On Time ton - 2.7 4.2 L=100nH
Fall Time tf - 2.4 3.2 RG=3.3W (3)
Switching Times
Turn Off Time toff
ms
- 4.4 6.4 VGE=±15V Tc=125°C
Peak Forward Voltage Drop VFM V - 2.0 2.9 -Ic=1,200A,VGE=0V
Reverse Recovery Time trr ms - 0.8 1.4 Vcc=1,250V,-Ic=1,200A,L=100nH,
Tc=125°C (4)
IGBT Rth
(j
-c
)
- - 0.008
Thermal Impedance FWD Rth
(j
-c
)
°C/W - - 0.016 Junction to case
Notes:(3) RG value is the test condition’s value for decision of the switching times, not recommended value.
Determine the suitable R
G value after the measurement of switching waveforms
(overshoot voltage,etc.)with appliance mounted.
(4) Counter arm IGBT VGE=-15V
Unit in mm
Weight: 1,200 (g) TERMINALS
G
E E E E
C C C C
6-M8
3-M4
8-φ7
http://store.iiic.cc/
1. The information given herein, including the specifications and dimensions, is subject to
change without prior notice to improve product characteristics. Before ordering,
purchasers are adviced to contact Hitachi sales department for the latest version of this
data sheets.
2. Please be sure to read "Precautions for Safe Use and Notices" in the individual brochure
before use.
3. In cases where extremely high reliability is required(such as use in nuclear power control,
aerospace and aviation, traffic equipment, life-support-related medical equipment, fuel
control equipment and various kinds of safety equipment), safety should be ensured by
using semiconductor devices that feature assured safety or by means of users’ fail-safe
precautions or other arrangement. Or consult Hitachi’s sales department staff.
4. In no event shall Hitachi be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to this data sheets. Hitachi
assumes no responsibility for any intellectual property claims or any other problems that
may result from applications of information, products or circuits described in this data
sheets.
5. In no event shall Hitachi be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
6. No license is granted by this data sheets under any patents or other rights of any third
party or Hitachi, Ltd.
7. This data sheets may not be reproduced or duplicated, in any form, in whole or in part ,
without the expressed written permission of Hitachi, Ltd.
8. The products (technologies) described in this data sheets are not to be provided to any
party whose purpose in their application will hinder maintenance of international peace
and safety not are they to be applied to that purpose by their direct purchasers or any
third party. When exporting these products (technologies), the necessary procedures are
to be taken in accordance with related laws and regulations.
HITACHI POWER SEMICONDUCTORS
For inquiries relating to the products, please contact nearest overseas representatives which is located
“Inquiry” portion on the top page of a home page.
NNNoootttiiiccceeesss
Hitachi power semiconductor home page address http://www.hitachi.co.jp/pse
http://store.iiic.cc/
