CHEMTRONICS TDS # 1697 Technical Data Sheet Flux-Off Lead-Free Flux Remover PRODUCT DESCRIPTION Flux-Off Lead-Free Flux Remover is an extra strength solvent that removes heavy and encrusted flux deposits resulting from high temperature lead-free soldering applications. This powerful cleaner quickly removes all types of flux, oxide particles, dust, grease and oil, and then evaporates quickly leaving no residues. Removes R, RA, RMA, and No Clean fluxes in lead-free and Tin/Lead applications Non-corrosive, safe for metals Flammable Extra-strength, fast drying Removes encrusted, baked-on fluxes All-Way Spray valve - even sprays upside down Available with BrushClean System RoHS compliant TYPICAL APPLICATIONS Flux-Off Lead-Free Flux Remover effectively cleans flux residues from: Chip Carriers Heat Sinks Metal Housings and Chassis Printed Circuit Boards Plugs Relays and Contacts Sockets Surface Mount Device Pads Solenoids Switches TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Flash Point -20F Evaporation Rate (butyl acetate=1) Specific Gravity Appearance >1 0.706 Clear, Colorless Liquid Odor Solubility in Water Kauri-Butanol Ethereal Negligible 86 (KB) Number Shelflife 5 years COMPATIBILITY Flux-Off Lead-Free Flux Remover, like any cleaner, should be tested on a non-critical area to determine plastics compatibility prior to use. Not recommended for ABS, acrylics, polycarbonates, polystyrenes and PVC. Material ABS Buna-N EPDM Graphite HDPE LDPE Lexan Neoprene Noryl Nylon 66 Cross-Linked PE Polypropylene Polystyrene PVC Silicone Rubber Teflon Viton Compatibility Non-Compatible Non-Compatible Excellent Excellent Excellent Good Non-Compatible Fair Non-Compatible Excellent Excellent Excellent Non-Compatible Non-Compatible Non-Compatible Excellent Non-Compatible USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Spray 4-6" from surface to clean. Wash parts from top to bottom, allowing the liquid to flush away flux residue. Flux-Off Lead-Free Flux Remover can be used to remove all types of fluxes in batch cleaning applications, including ultrasonic systems specifically rated for use with flammable solvents. TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800TECH-401. AVAILABILITY ES1697 12 oz. Aerosol ES897B ES197 8 oz. BrushClean System 1 Gal. (3.7 L) Liquid ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC-141b HCFC-225 0.0% 0.0% 0.0% VOC HFC nPB 51% 0.0% 0.0% CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB percentages shown are the content by weight. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 REV. B (08/13) 1-770-424-4888 Chemtronics and Flux-Off are registered trademarks of Chemtronics. All rights reserved. BrushClean is a trademark of Chemtronics. All rights reserved. DISTRIBUTED BY: