PRODUCT DESCRIPTION
Flux-Off Lead-Free Flux Remover is an
extra strength solvent that removes heavy and
encrusted flux deposits resulting from high
temperature lead-free soldering applications.
This powerful cleaner quickly removes all
types of flux, oxide particles, dust, grease and
oil, and then evaporates quickly leaving no
residues.
Removes R, RA, RMA, and No Clean
fluxes in lead-free and Tin/Lead
applications
Non-corrosive, safe for metals
Flammable
Extra-str ength, fast dr ying
Removes encrusted, ba ked-on fluxes
All-Way Spray valve - even sprays upside
down
Available with BrushClean System
RoHS compliant
TYPICAL APPLICATIONS
Flux-Off Lead-Fr ee Flux Remover
effectively clea ns flux residues from:
Chip Carriers
Heat Sinks
Metal Housings and Chassis
Printed Circuit Boards
Plugs
Relays and Contacts
Sockets
Surface Mount Device Pa ds
Solenoids
Switches
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Flash Point
-20°F
Evaporation Rate >1
(butyl acetate=1)
Specific Gravity 0.706
Appearance Clea r, Colorle ss Liquid
Odor
Ethereal
Solubilit y in Water
Negligible
Kauri-Butanol
(KB) Numb er
86
Shelflife
5 years
COMPATIBILITY
Flux-Off Lead-Free Flux Remover, like any
cleaner, should be tested on a non-critical
area to determine plastics compatibility prior
to use. Not recommended for ABS, acrylics,
polycarbonates, polystyrenes and PVC.
TDS # 1697
CHEMTRONICS
Technical Data Sheet
Flux-Off
Lead-Free Flux Remover
Material
Compatibility
ABS
Non-Compatible
Buna-N
Non-Compatible
EPDM
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Good
Lexan
Non-Compatible
Neoprene
Fair
Noryl
Non-Compatible
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Non-Compatible
PVC
Non-Compatible
Silicone Rubber
Non-Compatible
Teflon
Excellent
Viton
Non-Compatible
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue.
Flux-Off Lead-Free Flux Rem over can be
used to remove all ty pes of fluxes in batch
cleaning applications, including ultr asonic
systems specific ally rated for use with
flammable solvents.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
AVAILABILITY
ES1697 12 oz. Aerosol
ES897B 8 oz. BrushC lean System
ES197 1 Gal. (3.7 L) Liquid
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
0.0%
51%
HCFC-141b
HCFC-225
0.0%
0.0%
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. B (08/13)
Chemtronics and F lux-Off are registered trademarks of
Chemtronics. All rights re s erved . Brus hClean is a trademar k
of Chemtronics. All rights reserved.
DISTRIBUTED BY: