AON6502 30V N-Channel AlphaMOS General Description Product Summary * Latest Trench Power AlphaMOS (MOS LV) technology * Very Low RDS(on) at 4.5VGS * Low Gate Charge * High Current Capability * RoHS and Halogen-Free Compliant Application * DC/DC Converters in Computing, Servers, and POL * Isolated DC/DC Converters in Telecom and Industrial VDS ID (at VGS=10V) 30V 85A RDS(ON) (at VGS=10V) < 2.2m RDS(ON) (at VGS = 4.5V) < 2.7m 100% UIS Tested 100% Rg Tested DFN5X6 Top View D Top View Bottom View 1 8 2 7 3 6 4 5 G S PIN1 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS TC=25C Continuous Drain Current G Pulsed Drain Current C Avalanche Current C V 66 A 49 IDSM TA=70C 20 334 IDM TA=25C Continuous Drain Current Units V 85 ID TC=100C Maximum 30 A 39 IAS 70 A Avalanche energy L=0.05mH C EAS 123 mJ VDS Spike VSPIKE 36 V 100ns TC=25C Power Dissipation B TC=100C Power Dissipation A TA=70C PD TA=25C Rev 0: Nov 2011 7.4 Steady-State Steady-State RJA RJC W 4.7 TJ, TSTG Symbol t 10s W 33 PDSM Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case 83 -55 to 150 Typ 14 40 1.1 www.aosmd.com C Max 17 55 1.5 Units C/W C/W C/W Page 1 of 6 AON6502 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current Conditions Min ID=250A, VGS=0V Gate-Body leakage current VDS=0V, VGS= 20V Gate Threshold Voltage VDS=VGS, ID=250A RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=20A TJ=125C VGS=4.5V, ID=20A gFS Forward Transconductance VDS=5V, ID=20A VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous CurrentG DYNAMIC PARAMETERS Ciss Input Capacitance Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance Qgs Gate Source Charge Qgd 1.5 100 nA 2 V 1.7 2.2 2.2 2.8 2.2 2.7 85 0.7 VGS=0V, VDS=0V, f=1MHz VGS=10V, VDS=15V, ID=20A 0.3 m m S 1 V 85 A 3430 VGS=0V, VDS=15V, f=1MHz SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge A 5 1 Units V 1 TJ=55C IGSS Max 30 VDS=30V, VGS=0V VGS(th) Coss Typ pF 1327 pF 175 pF 0.7 1.1 53 64 nC 25 30 nC 7.8 nC Gate Drain Charge 10.3 nC tD(on) Turn-On DelayTime 7.5 ns tr Turn-On Rise Time tD(off) Turn-Off DelayTime 5.0 ns 33.8 ns tf Turn-Off Fall Time 9.8 ns trr Body Diode Reverse Recovery Time Qrr IF=20A, dI/dt=500A/s 22 Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/s 58 ns nC VGS=10V, VDS=15V, RL=0.75, RGEN=3 A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150C. D. The RJA is the sum of the thermal impedance from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. The maximum current rating is package limited. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 0: Nov 2011 www.aosmd.com Page 2 of 6 AON6502 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 100 VDS=5V 10V 80 60 80 60 ID(A) ID (A) 4.5V 3V 125C 40 40 20 20 25C VGS=2.5V 0 0 0 1 2 3 4 0 5 5 2 3 4 5 6 Normalized On-Resistance 1.6 4 RDS(ON) (m ) 1 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) 3 VGS=4.5V 2 1 VGS=10V ID=20A 1.4 1.2 VGS=4.5V ID=20A 1 VGS=10V 0.8 0 0 5 0 10 15 20 25 30 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 25 50 75 100 125 150 175 200 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature (Note E) 5 1.0E+02 ID=20A 1.0E+01 4 125C 3 IS (A) RDS(ON) (m ) 1.0E+00 125C 1.0E-01 1.0E-02 2 25C 1.0E-03 25C 1 1.0E-04 1.0E-05 0 2 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev 0: Nov 2011 4 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AON6502 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 5000 4500 VDS=15V ID=20A 4000 Capacitance (pF) VGS (Volts) 8 6 4 2 Ciss 3500 3000 2500 2000 Coss 1500 1000 500 0 0 10 20 30 40 50 Qg (nC) Figure 7: Gate-Charge Characteristics 60 0 1000.0 5 10 15 20 25 VDS (Volts) Figure 8: Capacitance Characteristics 30 280 10s RDS(ON) 10.0 10s 240 100s 200 1ms DC 10ms 1.0 TJ(Max)=150C TC=25C 160 120 80 TJ(Max)=150C TC=25C 0.1 Power (W) 100.0 ID (Amps) Crss 0 40 0.0 0 0.01 0.1 1 VDS (Volts) 10 100 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-to-Case (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Z JC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJC=1.5C/W 1 PD 0.1 Ton T 0.01 1E-05 Single Pulse 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev 0: Nov 2011 www.aosmd.com Page 4 of 6 AON6502 100 100 90 90 80 80 Current rating ID(A) Power Dissipation (W) TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 70 60 50 40 30 70 60 50 40 30 20 20 10 10 0 0 0 25 50 75 100 125 TCASE (C) Figure 12: Power De-rating (Note F) 150 0 25 50 75 100 125 TCASE (C) Figure 13: Current De-rating (Note F) 150 10000 TA=25C Power (W) 1000 100 10 1 1E-05 0.001 0.1 10 1000 Pulse Width (s) Figure 14: Single Pulse Power Rating Junction-toAmbient (Note H) Z JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJA=55C/W 0.1 PD 0.01 Single Pulse Ton T 0.001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev 0: Nov 2011 www.aosmd.com Page 5 of 6 AON6502 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR= 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds - Isd Vgs Ig Rev 0: Nov 2011 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6