Prices subject to change without notice.
Important Notice to Purchaser
Safety Information: Always read and follow all safety information included with the product. Do not exceed maximum operating RPM’s. Use guards
provided with machine. Follow safety operation procedures posted in work areas.
Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that
3M believes are reliable. However, many factors beyond 3M’s control can effect the use and performance of a 3M product in a particular application,
including the conditions under which the product is used and the time and environments conditions in which the product is expected to perform. Since
these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for
a particular purpose and suitable for the user’s method of application.
Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M
warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different
warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit
for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s
and seller’s sole obligation will be at 3M’s option, to replace the product or refund the purchase price.
Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether
direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
THREE EASY WAYS TO CONTACT US FOR ALL 3M INDUSTRIAL PRODUCTS:
3M can provide additional products and accessories to meet your needs. Please contact us in any of the following ways that
you prefer:
Contact your local 3M authorized distributor directly. For information on a 3M distributor or sales representative in your
area, contact us at the numbers below:
For the contiguous 48 United States:
Call .............. 1-866-279-1288
Fax .............. 1-877-369-2923
E-mail us at 3MIndustrial@mmm.com
Abrasive Systems Division
3M Center, Building 223-6S-03
St. Paul, MN 55144-1000
1-866-279-1235
www.3M.com/abrasives
3M Industrial Products
Abrasives and Power Tools for Welders
3M, Cool Flow, Classic, Cubitron, CUNO, DX, E-A-R, E-A-Rsoft, EARflex, EARform, EPX, Green Corps, Hookit, Lexa,
Neons, One Touch, Optime, Peltor, Push-Ins, Roloc, Safety-Walk, Scotch, Scotch-Brite, Scotch-Seal, Scotch-Weld,
Scotchblok, Scotchpar, Scotchpro, Speedglas, Stikit, Super 77, Tartan, Trizact, UltraFit, VHB, Virtua, Wetordry,
X.Sport and Yellow Neon are all trademarks of 3M.
Please Recycle. Printed in U.S.A. © 3M 2011. All rights reserved. 61-5002-8280-3 Bolger 11080470
Solutions
Welding
For additional 3M product information call 1-800-3M Helps or visit us at www.3M.com
1
2
3
Complete solutions.
Commitment to
Innovation and
Quality.
Complete solutions. It’s what you’ve come to expect from 3M, the leading supplier for welding industries.
For over 100 years, 3M has been a proven leader, providing advanced technology and innovative solutions
for increased productivity, enhanced efficiency and improved manufacturing processes.
This commitment to innovation continues with ongoing new product introductions focused on the
complete metalworking experience. Today, 3M Welding Products encompass a broad spectrum of
solution-specific products from personal safety to abrasives and high-strength adhesives. 3M presents
a growing portfolio with each addition to this line of advanced solutions designed for all metalworking
processes from start to finish.
for2011
What’s New
3M Cubitron II Fibre Discs 987C The coolest way to increase
productivity. If you work with heat-sensitive metals, like stainless steel,
and you value increased throughput and greater operator comfort,
try 3MCubitron II Fibre Discs 987C. These discs are made with
revolutionary 3M precision shaped ceramic grain technology, engineered
with ultra-sharp points that dig in and cut fast, run cool and last up to
3 times longer than conventional ceramic discs!
3M Cubitron II Fibre Discs 982C are made with revolutionary 3M
precision-shaped ceramic grain technology, engineered with ultra-sharp,
fast-cutting points that wear evenly, run cool and optimize mineral
breakdown to maximize disc life. 982C out performs comparable fibre
discs on life, cut and cost per grind, guaranteed. Finish more parts with
fewer discs regardless of grinding pressure.
3M AZ Belt 577F Because new 3M AZ Belts 577F last up to 20%
longer than competitive belts, you can grind more parts for about the
same price you’re now paying for abrasives. Its new and improved
premium mineral resin system, tough durable backing, and waterproof
grinding aid offers a big bang for your buck. Their outstanding balance
of high performance and affordability make 3M AZ Belts 577F an ideal
alternative for many day-to-day grinding operations.
3M Flap Disc 546D is a versatile product that delivers a fast cut, long
life, and a smooth finish. Performance and price make these discs a great
value and the flap design allows one disc to perform both the grinding
and blending steps. Plus, the economic alumina zirconia mineral is ideal
for lowering abrasive costs on both mild and stainless steel applications.
3M Green Corps Type 28 Depressed Center Wheel is constructed
of 3M Ceramic abrasive grain to provide fast cut, long life and high stock
removal. Its dish shape is perfect for grinding at lower angles of 15° to 25°
and is great for hard to reach areas.
3M Flap Disc 577F When finish is important, and you value the
extra cutting power of alumina zirconia over aluminum oxide, and the
versatility to work on all types of metals, choose 3M Flap Disc 577F.
This durable polyester-backed product provides longer life in high
pressure applications, and allows you to combine grinding and blending
in one step. Tough enough to tackle sharp edge work and beveling. For
those really big jobs, try the 3M Giant Flap Disc 577F with 25% more
thickness for aggressive cut and durability.
1
2
3
4
5
6
4
1 2
3
5 6
Kits and Packs
Abrasive Kits/Packs .................................................47
Coated Abrasives
Fibre Discs .....................................................8–11
Flap Discs .....................................................12–14
Stikit and PSA Discs ............................................15–16
Roloc Discs ...................................................17–20
Belts .........................................................21–24
Sheets and Rolls ................................................25–27
Flap Wheels .................................................... 28–29
Specialty ......................................................30–32
Surface Conditioning Abrasives
Scotch-Brite Discs ..............................................33–36
Roloc ......................................................33–34
Hook-and-Loop ..................................................35
TN Quick Change .................................................36
Spindle Mount ...................................................36
Scotch-Brite Belts .................................................37
Scotch-Brite Wheels ............................................38–40
Scotch-Brite Specialty Abrasives ...................................41–42
Scotch-Brite Hand Pads ............................................. 43
Scotch-Brite Rolls .................................................44
Bonded Abrasives
Bonded Wheels .................................................45–46
Cut-Off Wheels ....................................................46
12
P12
P16
Abrasive Grade Guides
Abrasive Grade Comparison Guide ......................................56
Scotch-Brite Disc Grade Guide ........................................56
Accessories
Abrasive Accessories .............................................48–55
Power Tools
Power Tools ......................................................2–7
Table of Contents
1
Power Tools
2
Medium-Duty Grinding
These .5 HP Die Grinders are ideal for medium-duty
applications. Available in extended shaft models. 28330 28331 28332
4
1
3
5
7
8,000 and 12,000 RPM Die Grinder
Models 20239, 20240
18,000 and 20,000 RPM
Die Grinder
Models 20237, 20238
6
2
1 High-output thermally balanced air motor
2 Directional exhaust (360 degree)
3 3M Gripping Material
4 Safety lever throttle to avoid accidental starting
5 Tandum double-sealed bearings
6 Double-taper collet assembly
7 Offset gear box for increased torque
Model No. Max RPM Weight
Pound (kg)
Length
Inch (mm) Air Inlet Thread Collet Size UPC
1 HP (744 W) Motor Airflow Rate: 35 SCFM (991 LPM)
20237 20,000 1.69 (.77) 7.75 (196.9) 1/4" NPT 1/4" 051141-20237-2
20238 18,000 1.69 (.77) 7.75 (196.9) 1/4" NPT 1/4" 051141-20238-9
20239 12,000 2.06 (.93) 10 (254) 1/4" NPT 1/4" 051141-20239-6
20240 8,000 2.06 (.93) 10 (254) 1/4" NPT 1/4" 051141-20240-2
.5 HP (372 W) Motor Airflow Rate: 35 SCFM (991 LPM)
28330 18,000 1.13 (.512) 6.88 (174.6) 1/4" NPT 1/4" 051141-28330-2
28331 18,000* 1.54 (.697) 10.63 (269.9) 1/4" NPT 1/4" 051141-28331-9
28332 4,000 1.58 (.717) 8.88 (200) 1/4" NPT 1/4" 051141-28332-6
*with extension
NEW!
NEW!
NEW!
3M Die Grinders
Heavy-Duty Grinding
Powerful 1 HP Die Grinders are excellent for
big jobs such as weld or stock removal. 20237 20238 20239 20240
your abrasive performance
& maximize your comfort
to optimize
3M Power Tools
A full family of innovative tools
Power Tools
3
Model No. Weight
Pound (kg) Length Height
Inch (mm) Air Inlet Thread UPC
Tool Diameter: 4" Max RPM: 12,000 Motor: 1 HP (744 W)
28403 2.66 (1.21) Standard 4.5 (114) 3/8" NPT* 3/8–24 EXT 051141-28403-3
28413 3.85 (1.75) Extended 4.5 (114) 3/8" NPT* 3/8–24 EXT 051141-28413-2
Tool Diameter: 4-1/2" Max RPM: 12,000 Motor: 1 HP (744 W)
28405 2.84 (1.29) Standard 4.7 (119) 3/8" NPT* 5/8–11 EXT 051141-28405-7
28414 4.03 (1.83) Extended 4.7 (119) 3/8" NPT* 5/8–11 EXT 051141-28414-9
*includes 3/8" to 1/4" reducer
NEW!
NEW!
NEW!
NEW!
3M Grinder and Extended Grinder
Packed with power without excessive weight for more comfortable grinding and improved
productivity. With a maximum run speed of 12,000 RPM, high torque, 1 HP motor and
hardened steel rotor, these air-tools are built for durability and smooth operation. The new
3M Grinders are the perfect complement for use with 3M Abrasive Discs with 4" or 4.5"
diameters. 3M Grinders feature repositionable guards for better visibility, steel gear heads
for added durability and superior noise reduction. Get more power and productivity from
3M Power Tools.
6
5
88
3
1
4
7
2
5" and 6" Cut-Off Wheel Tool
Models 20235, 20236
3" and 4" Cut-Off Wheel Tool
Models 20233, 20234
1 High-output air motor
2 Directional exhaust (360 degree) — not on Model No. 28407
3 3M Gripping Material
4 Safety lever throttle to avoid accidental starting
5 Over-sized ball bearings on output spindle
6 Robust spiral bevel gearing
7 4-place indexable head
8 360° rotatable safety guard
20233 20234
20235
20236
3M Cut-Off Wheel Tool Extended
New 18,000 RPM, 1 HP tool with right angle head and repositionable guard for optimal power and visibility.
Extended body style for greater versatility and control. Features 3M Gripping Material for added comfort.
28407
Model No. Tool Dia.
Inch (mm) Max RPM Weight
Pound (kg)
Length
Inch (mm)
Height
Inch (mm) Air Inlet Thread UPC
Motor: 1 HP (744 W) Airflow Rate: 35 SCFM (991 LPM)
20233 3 (76) 25,000 2.09 (.95) 7.75 (196.9) 3 (76.2) 1/4" NPT 051141-20233-4
20234 4 (100) 20,000 2.25 (1.02) 7.75 (196.9) 3.25 (82.6) 3/8" NPT 051141-20234-1
20235 5 (125) 12,000 3.47 (1.57) 8.75 (222.3) 5.25 (133.4) 3/8" NPT 051141-20235-8
20236 6 (152) 10,000 3.69 (1.67) 8.75 (222.3) 5.25 (133.4) 3/8" NPT 051141-20236-5
28407* 4 (100) 18,000 2.77 (1.26) 8.5 (216) 4.7 (119) 3/8" NPT* 051141-28407-1
*includes 3/8" to 1/4" reducer
NEW!
3M Cut-Off Wheel Tools
Designed to easily handle cutting through everything from standard
rebar to oversized bolts, you can count on the performance and
dependability of the new line of 3M Cut-Off Wheel Tools.
Power Tools
4
1 3M Gripping Material helps absorb and reduce vibration
2 Aluminum body covered with a durable composite cover
helps prevent cracked housings
3 Extended and curved wrist rest for more support
4 Recessed lever, no pinch points
5 Internal muffler decreases noise up to 4 dB and won’t
easily break off
3M Elite Non-Vacuum Random Orbital Sanders
We took our best line of air-powered 3M Random Orbital Sanders and just
made it better. Features exclusive 3M Gripping Material and extended,
curved wrist rest for more support. Recessed lever eliminates pinch points.
Internal muffler decreases noise by as much as 4 dB. Aluminum body
covered with a durable composite cover helps prevent cracked housings.
Improved dust collection port.
1
2
3
4
5
Model No. Orbit Dia.
Inch (mm)
Weight
Pound (kg)
Length
Inch (mm)
Height
Inch (mm)
Pad
Included UPC
Tool Diameter: 3" (77mm) Max RPM: 12,000 Motor: .28 HP (209 W) Airflow Rate: 17 SCFM (481 LPM)
28496 3/32 (2.5) 1.31 (.596) 5.78 (147) 3.38 (86) Stikit 20348 051141-28496-5
28494 3/16 (5) 1.52 (.692) 5.78 (147) 3.64 (92.5) Stikit 20348 051141-28494-1
Tool Diameter: 5" (127mm) Max RPM: 12,000 Motor: .28 HP (209 W) Airflow Rate: 17 SCFM (481 LPM)
28498 3/32 (2.5) 1.72 (.781) 6.77 (172) 3.58 (91) Stikit 20351 051141-28498-9
28497 3/16 (5) 1.76 (.8) 6.77 (172) 3.58 (91) Stikit 20351 051141-28497-2
28495 5/16 (8) 1.8 (.817) 6.77 (172) 3.58 (91) Stikit 20351 051141-28495-8
Tool Diameter: 6" (150mm) Max RPM: 12,000 Motor: .28 HP (209 W) Airflow Rate: 17 SCFM (481 LPM)
28501 3/32 (2.5) 2.1 (.957) 7.36 (187) 3.58 (91) Stikit 20354 051141-28501-6
28500 3/16 (5) 1.86 (.844) 7.36 (187) 3.58 (91) Stikit 20354 051141-28500-9
28499 5/16 (8) 1.91 (.869) 7.36 (187) 3.58 (91) Stikit 20354 051141-28499-6
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Power Tools
5
Model No. Orbit Dia.
Inch (mm)
Weight
Pound (kg)
Length
Inch (mm)
Height
Inch (mm)
Pad
Included UPC
Tool Diameter: 3" (77mm) Max RPM: 12,000 Motor: .28 HP (209 W) Airflow Rate: 17 SCFM (481 LPM)
20314 3/32 (2.5) 1.12 (.51) 4.90 (124.33) 3.10 (78.61) Stikit 20348 051141-20314-0
20250 3/16 (5) 1.65 (.75) 4.90 (124.33) 3.10 (78.61) Hookit 20350 051141-20250-1
Tool Diameter: 5" (127mm) Max RPM: 12,000 Motor: .28 HP (209 W) Airflow Rate: 17 SCFM (481 LPM)
20320 3/32 (2.5) 1.59 (.72) 5.84 (148.4) 3.26 (82.9) Stikit 20351 051141-20320-1
20317 3/16 (5) 1.65 (.75) 5.89 (149.6) 3.26 (82.9) Stikit 20351 051141-20317-1
20253 5/16 (8) 1.65 (.75) 5.89 (149.6) 3.26 (82.9) Stikit 20351 051141-20253-2
Tool Diameter: 6" (150mm) Max RPM: 12,000 Motor: .28 HP (209 W) Airflow Rate: 17 SCFM (481 LPM)
20328 3/32 (2.5) 1.68 (.76) 6.34 (161.1) 3.26 (82.9) Stikit 20354 051141-20328-7
20325 3/16 (5) 1.74 (.79) 6.39 (162.3) 3.26 (82.9) Stikit 20354 051141-20325-6
20324 5/16 (8) 1.78 (.81) 6.39 (162.3) 3.26 (82.9) Stikit 20354 051141-20324-9
3M Non-Vacuum Random Orbital Sanders
These powerful and popular non-vacuum tools meet or exceed highest
performance standards and are precision balanced for smooth operation. A
variety of grip sizes are available and lever is color-coded for orbit identification.
For use on wood, composites, solid surface or metalworking applications.
3M Inline Sanders 1 HP (744W)
Generate straight line scratches for finishing stainless steel and other
metals. These straight shaft sanders can be used with inflatable or
slotted wheel accessories and many other wheel products.
Model No. Max RPM Weight
Pound (kg)
Length
Inch (mm) Air Inlet Thread Collet Size UPC
Motor: 1 HP (744 W)
28338 1,600 3.32 (1.51) 9.88 (251) 1/4" NPT 5/8"–11 051141-28338-8
28339 3,500 2.64 (1.20) 8.50 (216) 1/4" NPT 5/8"–11 051141-28339-5
28339
28338
591391
Power Tools
6
9
5
873
12
4
6
1 HP 3" Disc Sander
Model 20232
.5 HP 2" Disc Sander
Model 20231
.3 HP 2" Disc Sander
Model 20230
97º head
3M Disc Sanders
Designed for comfort and power, the 3M pneumatic disc sanders feature:
3M Gripping Material for a secure grip with less effort; a 97° head for
decreased wrist strain; easy-handling, compact design for less vibration;
3M Roloc Disc Pads can directly mount to sander without collet.
1 High-output air motor
2 Directional exhaust (360 degree*) — not on Model No. 28408
3 3M Gripping Material
4 Safety lever throttle to avoid accidental starting
5 Needle and ball bearing supported output spindle
6 Robust spiral bevel gearing
7 97° head (vs. 90°) allows for more comfortable wrist position
8 Direct mount for use with 3M Roloc Backup Pads without
using a collet
9 Shorter distance to the workpiece generates less vibration and
allows for better control
28329/20231
20232
28328/28341
3M Disc Sander
3Ms new Disc Sander 28408 delivers versatility, durability and power (1 HP). Combined with 3M and Scotch-Brite
Abrasive Discs and Disc Accessories, the new sander expands 3M’s right angle grinding systems to include 4", 4-1/2"
and 5" discs for a variety of metalworking applications. The new tool design includes hardened steel rotors for superior
motor function and smoothness, a precision valve system for accurate speed control, steel gear head casings for
added durability and vibration and noise reduction features.
28408
Model No. Motor Weight
Pound (kg)
Length
Inch (mm)
Height
Inch (mm)
Airflow Rate
SCFM (LPM)
Exhaust
Direction UPC Code
Tool Diameter: 2" (50mm) Max RPM: 12,000 Air Inlet Thread: 1/4" NPT
28328 .3 HP (223 W) 1.09 (.49) 5.91 (150.2) 2.5 (63.5) 17 (481) Rear Directional 051141-28328-9
28329 .5 HP (372 W) 1.28 (.58) 6.75 (171.5) 2.75 (69.9) 23 (651) Rear Directional 051141-28329-6
Tool Diameter: 2" (50mm) Max RPM: 20,000 Air Inlet Thread: 1/4" NPT
28341 .3 HP (223 W) 1.09 (.49) 5.91 (150.2) 2.5 (63.5) 17 (481) Rear Directional 051141-28341-8
20231 .5 HP (372 W) 1.28 (.58) 6.75 (171.5) 2.75 (69.9) 23 (651) Rear Directional 051141-20231-0
Tool Diameter: 3" (76mm) Max RPM: 15,000 Air Inlet Thread: 1/4" NPT
20232 1 HP (744 W) 1.97 (.89) 8.25 (209.6) 3.25 (82.6) 35 (991) Rear Directional 051141-20232-7
Tool Diameter: 4"–5" (100–125mm) Max RPM: 12,000 Air Inlet Thread: 3/8" NPT*
28408 1 HP (744 W) 3.1 (1.4) 12.5 (317.5) 4.23 (107.4) 35 (991) Rear 051141-28408-8
*includes 3/8" to 1/4" reducer
NEW!
Power Tools
7
3M File Belt Sander
Ideally suited for use with 3M Abrasive Belts and
Scotch-Brite Belts for a variety of metalworking
applications. Grind and blend from contact wheel or
platen, finish and polish from slack of belt.
Model No. Motor Motor Speed
RPM
Belt Speed
SFPM (SMM)
Weight
Pound (kg)
Length
Inch (mm)
Height
Inch (mm)
Width
Inch (mm) UPC
28366 0.6 HP 22,000 4990 (1521) 2.8 (1.3) 14.57 (370) 2.93 (74.5) 5.95 (151.2) 051141-28366-1
3M File Belt Sander Kit
This convenient kit comes packed in a molded case and includes:
• 3M File Belt Sander (PN 28366)
• 2 popular attachment arms (PNs 28368 and 28370)
• 0.5 oz. sample of 3M Air Tool Lubricant (PN20451)
• Steel and rubber drive wheels
Model No. UPC
28367 051141-28367-8
1 Hardened Steel Arm Post – provides stability
2 Metal Shielded Composite Belt Cover
3 Easily Interchangeable Steel or Rubber Drive Pulley
4 360° Rotatable Handle
5 Smooth Action Safety Lever – helps prevent accidental starting
6 Comfortable 3M Gripping Material
7 Steel Endplates – provide stability for more power; longer motor life
8 Hardened Steel Rotor – delivers more torque; provides wear resistance
9 Lightweight Reinforced Composite Housing
10 Contamination Resistant Double Shielded Precision Bearings
11 60° Rotatable Belt Housing/Guard
1
2
3
45
6
7
8
9
10
11
95298
Coated Abrasives
8
3M Fibre Discs
Choose the performance level that fits your needs with a complete
offering of 3M Fibre Discs. Get great performance at a great price
with 3M’s general purpose metalworking disc 381C. Or, set a new
standard for productivity with 3M Cubitron II 982C Discs. All of
3M’s fibre discs are available in a variety of sizes.
3M Fibre Disc Selection Guide
Select Fibre Discs for fast cutting when grinding and blending.
Product
ID Mineral Metal Type
Good
381C Aluminum Oxide Carbon Steel
501C Alumina Zirconia Stainless/
Aluminum
Better
501C Alumina Zirconia Carbon Steel
785C Ceramic Aluminum
Oxide Blend
Stainless/
Aluminum
Best
988C Ceramic
Abrasive Grain Carbon Steel
985C Ceramic
Abrasive Grain
Stainless/
Aluminum
Premium
982C Precision
Shaped Ceramic Carbon Steel
987C Precision
Shaped Ceramic
Stainless/
Aluminum
Life
Cut Rate
381C
501C
Carbon Steel
988C
982C
Life
Cut Rate
501C
785C
Stainless Steel
985C
987C
See pages 48–55 for available accessories.
3M Fibre Discs 381C
•Generalpurposediscforweld
removal, grinding and blending
•Resinbondaluminumoxideprovides
durability and aggressive stock removal
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051144-77595-8 24
13,300 4-1/2" x 7/8"
25
051144-77596-5 36
051144-77597-2 50
051144-77598-9 60
051144-77599-6 80
051144-77600-9 100
051144-77601-6 120
051144-81369-8 24
12,000 5" x 7/8"
051144-81372-8 36
051144-81375-9 50
051144-01727-0 60
051144-20054-2 80
051144-20053-5 100
051144-20052-8 120
051144-01745-4 16
8,600 7" x 7/8"
051144-81370-4 24
051144-81373-5 36
051144-81376-6 50
051144-01741-6 60
051144-01740-9 80
051144-01739-3 100
051144-01738-6 120
051144-81371-1 24
6,600 9-1/8" x 7/8"
25/100
051144-81373-5 36
051144-81377-3 50
25
051144-01762-1 80
051144-01761-4100
051144-01760-7120
† Made-to-Order
159094
Coated Abrasives
3M Fibre Discs 785C
•3M Ceramic Aluminum Oxide
blend abrasive grain
•Anexcellentstartingpointforstainlesssteel
•Includesagrindingaidforcoolerrunning
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051111-60719-0 36 13,300 4-1/2" x 5/811* 25
051144-80660-7 36
13,300 4-1/2" x 7/8"
25/100
051144-80661-4 50
051144-80662-1 60
051144-80663-8 80
051144-80665-2 P120
051144-13931-6 24
12,000 5" x 7/8"
051144-13930-9 36
051144-13928-6 50
051144-13977-4 60
051144-13926-2 80
051144-80654-6 P100
051144-80655-3 P120
051144- 88831-360
8,600
7" x 5/8–11*
051144-13937-8 24
7" x 7/8"
051144-13936-1 36
051144-13934-7 50
051144-13933-0 60
051144-13932-3 80
051144-80656-0 P100
051144-80657-7 P120
051144-13943-9 24
6,600 9-1/8" x 7/8"
051144-13942-2 36
051144-13940-8 50
051144-13938-5 80
† Made-to-Order
* Quick Change Tinneman Nut Attachment
60875
3M Fibre Discs (cont.)
3M Fibre Discs 501C
•Versatilediscforuseonawide
variety of metals
•Aluminumzirconiaprovidesagoodoption
for both stainless and mild steel applications
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051111-50409-3 24
13,300 4-1/2" x 7/8"
25/100
051111-50413-0 36
051111-50414-7 50
051111-50415-4 60
051111-50416-1 80
051111-50417-8 100
051111-50419-2 120
051111-50410-9 24
12,000 5" x 7/8"
051111-50412-3 36
051111-50420-8 50
051111-50421-5 60
051111-50422-2 80
051111-50423-9 100
051111-50424-6 120
051111-50411-6 24
8,600 7" x 7/8
051111-50426-0 36
051111-50425-3 50
051111-50427-7 60
051111-50428-4 80
051125-63799-2100
051111-50430-7120
051111-50432-124
6,600 9-1/8" x 7/8"
051111-50433-8 36
051111-50434-550
† Made-to-Order
51773
Tech Tip
Weld Blending Mild Steel for Paint Prep
Step 1 – Fibre Disc 982C Grade 36+
Step 2 Scotch-Brite Light Grinding and
Blending Disc SD on black ribbed pad
Step 3 Apply 3 mil Paint
Results – Productivity increase
– Abrasive cost improvement
9
See pages 48–55 for available accessories.
3M Cubitron II
Fibre Disc 982C
•3Mprecision-shaped
ceramic grain, engineered with
ultra-sharp,fastcuttingpoints
that wear evenly, run cool, and
optimize mineral breakdown
to maximize life
•Bestinclassforweldprepand
removal on carbon steel applications
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051141-27400-3 36+
13,300 4-1/2" x 7/8"
25/100
051141-27631-1 60+
051141-27635-9 80+
051141-27401-0 36+
12,000 5" x 7/8"
051141-27632-8 60+
051141-27636-6 80+
051141-27402-7 36+
8,600 7" x 7/8"
051141-27633-5 60+
051141-27637-3 80+
051141-27403-4 36+
6,600 9-1/8" x 7/8"
051141-27634-2 60+
051141-27638-0 80+
TN Quick Change
051141-27425-6 36+
13,300 4-1/2" x 5/8–11*
25/100
051141-27639-7 60+
051141-27642-7 80+
051141-27404-1 36+
12,000 5" x 5/8 –11*
051141-27640-3 60+
051141-27643-4 80+
051141-27405-8 36+
8,600 7" x 5/8–11*
051141-27641-0 60+
051141-27644-1 80+
GL Quick Change
051141-27406-5 36+
12,000 5" x 5/8 –11*
25/100
051141-27724-0 60+
051141-27726-4 80+
051141-27407-2 36+
8,600 7" x 5/8–11*
051141-27725-7 60+
051141-27727-1 80+
* Quick Change Tinneman Nut Attachment
Coated Abrasives
3M Fibre Discs (cont.)
Tech Tip
Use 3M Red Ribbed Pads to optimize product life of
900 series fibre discsgrades 24 and 36.
3M Fibre Discs 985C
•3M Ceramic abrasive grain
•3M’sbetterchoiceforalong-lasting
disc for stainless steel
•Includesagrindingaidforcoolerrunning
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051111-55767-9 36
12,000 5" x 7/8"
25/100
051111-55780-8 50
051111-55776-1 60
051111-55779-2 80
051111-55971-0 24
8,600 7" x 7/8"
051111-55972-7 36
051111-55973-4 50
051111-55974-1 60
051111-55975-8 80
157186
606708
10
See pages 48–55 for available accessories.
704802, 704803,
704804
Coated Abrasives
11
3M Fibre Discs (cont.)
3M Cubitron II
Fibre Disc 987C
•3Mprecision-shaped
ceramic grain, engineered
withultra-sharp,fastcutting
points that wear evenly, run
cool, and optimize mineral
breakdown to maximize life
•Bestinclassforweldprepandremoval
on heat sensitive alloys such as stainless steel
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051141-27447-8 36+
13,300 4-1/2" x 7/8"
25/100
051141-27653-3 60+
051141-27657-1 80+
051141-27448-5 36+
12,000 5" x 7/8"
051141-27654-0 60+
051141-27658-8 80+
051141-27449-2 36+
8,600 7" x 7/8"
051141-27655-7 60+
051141-27659-5 80+
051141-27450-8 36+
6,600 9-1/8" x 7/8"
051141-27656-4 60+
051141-27660-1 80+
TN Quick Change
051141-27469-0 36+
13,300 4-1/2"
25/100
051141-27661-8 60+
051141-27664-9 80+
051141-27467-6 36+
12,000 5"
051141-27662-5 60+
051141-27665-6 80+
051141-27468-3 36+
8,600 7"
051141-27663-2 60+
051141-27666-3 80+
GL Quick Change
051141-27728-8 36+
12,000 5"
25/100
051141-27730-1 60+
051141-27732-5 80+
051141-27729-5 36+
8,600 7"
051141-27731-8 60+
051141-27733-2 80+
3M Fibre Discs 988C
•3M Ceramic abrasive grain
•3M’sbestpremiumdiscforlong-lasting
performance for mild steel grinding
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
051111-55712-9 36 13,300 4-1/2" x 5/8 –11* 25/100
051141-27341-936 12,000 5" x 5/8 –11* 100
051111-55746-4 24
12,000 5" x 7/8"
25/100
051111-55743-3 36
051111-55742-6 50
051111-60319-2 60
051111-55740-2 80
051111-55840-9 24
8,600
7" x 5/8–11*
051111-55715-0 36
051111-55964-2 24
7" x 7/8"
051111-55965-9 36
051111-55966-6 40
051111-55967-3 50
051111-55739-6 60
051111-55968-0 80
051111-60314-7 24 50/100
051111-55744-0 24
6,600 9-1/8" x 7/8" 25/100
051111-55735-8 36
051111-55733-4 50
† Made-to-Order
* Quick Change Tinneman Nut Attachment
157187
See pages 48–55 for available accessories.
664624, 664625,
664626
12
3M Flap Discs
Type 29 227097 Type 27
227096
3M Flap Discs offer an unbeatable system for grinding and blending in one easy step. The construction wears away, exposing fresh
mineral to extend disc life and provide consistent cut rates. Great for weld grinding, blending, deburring, rust removal, surface prep and
edge grinding on all types of metal. Available in both T29 or T27 constructions with or without the 5/8–11 hub.
3M Flap Disc Selection Guide
SelectFlapDiscsforextendedlifeandsingle-stepgrinding/blendingonalltypesofmetals.
Product ID Mineral
4-1/2" x 7/8" 4-1/2" x 5/8–11 7" x 7/8" 7" x 5/8–11
T27 T29 T27 T29 T27 T29 T27 T29
Good 546D Alumina Zirconia ●●●●●●●●
577F Alumina Zirconia ●●●●●●●●
Better 747D Ceramic Aluminum Oxide Blend ●●●
Coated Abrasives
3M Flap
Discs 546D
•Versatilealuminazirconia
mineral works on a variety
of metals and applications
•FlexibleXwt.cotton
backing designed for
fast cut on light duty
grinding/finishing applications
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Type 29
051115-28874-624
13,300
4-1/2" x 7/8"
10
051115-28875-336
051115-28876-0 40
051115-28877-7 60
051115-28878-4 80
051115-28879-1120
051115-28868-524
4-1/2" x 5/8–11*
051115-28869-236
051115-28870-8 40
051115-28871-5 60
051115-28872-2 80
051115-28873-9120
† Made-to-Order
* Quick Change Hub Attachment
3M Flap Discs 546D (cont.)
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Type 29
051115-28926-224
8,600
7" x 7/8"
5
051115-28927-936
051115-28928-6 40
051115-28929-3 60
051115-28930-9 80
051115-28931-6120
051115-28920-024
7" x 5/8–11*
051115-28921-736
051115-28922-4 40
051115-28923-1 60
051115-28924-8 80
051115-28925-5120
† Made-to-Order
* Quick Change Hub Attachment
624139
See pages 48–55 for available accessories.
13
Coated Abrasives
624139
3M Flap
Discs 577F
•Versatilealuminazirconia
mineral works on a variety
of metals and applications
•DurableYFwt.polyester
backing designed for long
life on the most heavy duty
grinding applications
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Type 29
051141-30983-5 36
13,300
4-1/2" x 5/8–11
10
051141-30984-2 40
051141-30985-9 60
051141-30986-6 80
051141-30987-3 36
4-1/2" x 7/8"
051141-30988-0 40
051141-30989-7 60
051141-30990-3 80
051141-30991-0 36
8,600
7" x 5/8–11
5
051141-30992-7 40
051141-30993-4 60
051141-30994-1 80
051141-30995-8 36
7" x 7/8"
051141-30996-5 40
051141-30997-2 60
051141-30998-9 80
Type 27
051141-30951-4 36
13,300
4-1/2" x 5/8–11
10
051141-30952-1 40
051141-30953-8 60
051141-30954-5 80
051141-30955-2 36
4-1/2" x 7/8"
051141-30956-9 40
051141-30957-6 60
051141-30958-3 80
051141-30963-7 36
8,600
7" x 5/8–11
5
051141-30964-4 40
051141-30965-1 60
051141-30966-8 80
051141-30959-0 36
7" x 7/8"
051141-30960-6 40
051141-30961-3 60
051141-30962-0 80
Tech Tip
Flap discs typically provide a finish one grade finer
than they are graded.
3M Flap Discs (cont.)
686009
3M Flap Discs 546D (cont.)
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Type 27
051141-30598-136
13,300
4-1/2" x 7/8"
10
051141-30599-8 40
051141-30600-1 60
051141-30601-8 80
051141-30602-5120
051141-30593-636
4-1/2" x 5/8–11*
051141-30594-3 40
051141-30595-0 60
051141-30596-7 80
051141-30597-4120
051141-30603-236
8,600
7" x 7/8"
5
051141-30604-9 40
051141-30605-6 60
051141-30606-3 80
051115-28917-0120
051141-30607-036
7" x 5/8–11*
051141-30608-7 40
051141-30609-4 60
051141-30610-0 80
051115-28919-4120
† Made-to-Order
* Quick Change Hub Attachment
See pages 48–55 for available accessories.
Coated Abrasives
14
3M Giant Flap
Discs 577F
•Versatilealuminazirconia
mineral works on a variety
of metals and applications
•DurableYFwt.polyester
backing designed for long
life on the most heavy duty
grinding applications
•25%moreflapsthanstandard3M Flap Discs 577F
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Type 29
051141-30999-6 36
13,300
4-1/2" x 5/8–11
10
051141-31000-8 40
051141-31001-5 60
051141-31002-2 80
051141-31003-9 36
4-1/2" x 7/8"
051141-31004-6 40
051141-31005-3 60
051141-31006-0 80
051141-31011-4 36
8,600
7" x 5/8–11
5
051141-31012-1 40
051141-31013-8 60
051141-31014-5 80
051141-31007-7 36
7" x 7/8"
051141-31008-4 40
051141-31009-1 60
051141-31010-7 80
Type 27
051141-30967-5 36
13,300
4-1/2" x 5/8–11
10
051141-30968-2 40
051141-30969-9 60
051141-30970-5 80
051141-30971-2 36
4-1/2" x 7/8"
051141-30972-9 40
051141-30973-6 60
051141-30974-3 80
051141-30979-8 36
8,600
7" x 5/8–11
5
051141-30980-4 40
051141-30981-1 60
051141-30982-8 80
051141-30975-0 36
7" x 7/8"
051141-30976-7 40
051141-30977-4 60
051141-30978-1 80
3M Flap Discs (cont.)
721412
3M Flap Discs 747D
•3M Ceramic Aluminum Oxide blend
abrasive grain provides extended cut
and life on hard metals
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Type 27
051111-49613-8 36
13,300
4-1/2" x 7/8"
10
051111-49614-5 50
051111-49615-2 60
051111-49616-9 80
051111-49617-6 P120
051111-55805-8 36
4-1/2" x 5/8–11*
051111-61057-250
051111-61058-960
051111-61059-680
051111-61060-2P120
051111-49608-4 36
8,600 7" x 7/8"
051111-49609-1 50
051111-49610-7 60
051111-49611-4 80
051111-49612-1120
† Made-to-Order
* Quick Change Tinneman Nut Attachment
84696
84696
See pages 48–55 for available accessories.
Coated Abrasives
15
3M Stikit Discs
3M Stikit Disc Roll 236U
•Aluminumoxideona
C wt. paper backing
•Discsforpaint,primer,wood,
metal, plastic and fiberglass
•Strongpaperbackingprovides
durability and increased cut rate
•Opencoatminimizesloading
•Loadresistantcoating
UPC Grade Diameter Discs/Roll Qty./Case
Paper Backing
051144-86488-1 P80
5"
100 4
051144-86489-8 P100
051144-86490-4 P120
051144-86491-1 P150
051144-86492-8 P180
051144-86493-5 P220
051144-86494-2 P240
051144-86495-9 P320
051144-86496-6 P400
051144-86497-3 P500
051144-86468-3 P80
6"
051144-86469-0 P100
051144-86470-6 P120
051144-86471-3 P150
051144-86472-0 P180
051144-86473-7 P220
051144-86474-4 P240
051144-86475-1 P320
051144-86476-8 P400
051144-86477-5 P500
209045
3M Stikit Disc Roll 341D
•Aluminumoxideonadurable
Xwt.clothbacking
•Resinbondedforheatresistance
UPC Grade Diameter Discs/Roll Qty./Case
Paper Backing
051144-21752-6 50
5" X NH
100 4
051144-21751-9 60
051144-21750-2 80
051144-21749-6 P100
051144-21748-9 P120
051144-21746-5 P180
051144-21762-5 60 6" X NH
051144-21761-8 80
See pages 48–55 for available accessories.
3M Stikit and PSA Disc Selection Guide
3M ID Anti-Loading Backing
Application Metal Type
Blending Finishing Aluminum Carbon Steel Non-Ferrous (Brass/Bronze)
Good 341D X wt. Cloth
Better
236U Yes C wt. Paper
363I F wt. Paper
348D X wt. Cloth
3M Stikit and PSA Discs
3M Stikit and PSA Discs are designed to handle a wide range of sanding and finishing needs. These discs have a pressure sensitive
adhesive coating on the back side for easy application and clean removal.
715118
3M PSA Cloth Disc 348D
•AluminumoxideonanXwt.clothbacking
•Heavy-duty,cloth-backeddiscsformore
aggressive applications
•Providesexcellentadhesionwhileremovingeasily
UPC Grade Diameter Min./Case
Cloth Backing
051144-20913-2 36
2"
50/200
051144-20911-8 50
051144-20910-1 60
051144-20909-5 80
051144-20908-8 P100
051144-20907-1 P120
051144-01335-7 40
3"
051144-01334-0 50
051144-01333-3 60
051144-01332-6 80
051144-01331-9 P100
051144-01330-2 P120
Coated Abrasives
16
3M Stikit Discs (cont.)
3M Stikit Disc Roll 363I
•Aluminumoxideonanextraheavy
F wt. paper backing
•Resinbondedforheatresistance
UPC Grade Diameter Discs/Roll Qty./Case
Paper Backing
051144-21800-4 60
5" x NH
100 4
051144-21799-1 80
051144-21798-4 P100
051144-21797-7 P120
051144-21796-0 P150
051144-21795-3 P180
051144-21794-6 60
6" x NH
051144-21793-9 80
051144-21792-2 P100
051144-21791-5 P120
051144-21790-8 P150
051144-21789-2 P180
105480
3M PSA Cloth Disc 348D (cont.)
UPC Grade Diameter Min./Case
Cloth Backing
051144-20891-3 36
5"
50/250
051144-20890-6 40
051144-20889-0 50
051144-20888-3 60
051144-20887-6 80
051144-20886-9 P100
051144-20885-2 P120
051144-20884-5 P150
051144-20883-8 P180
051144-20881-4 P240
051144-21639-0 36
6"
051144-21731-1 40
051144-20879-1 50
051144-20878-4 60
051144-20877-7 80
051144-20876-0 P100
051144-21497-6 P120
051144-20874-6 36
8"
051144-20873-9 40
051144-20871-5 60
051144-20870-8 80
051144-20868-5 P120
051144-88906-8 36
12" 10
051144-88905-1 40
051144-88904-4 50
051144-88903-7 60
051144-88902-0 80
051144-88901-3 P100
051144-88890-0 36
16"
10
051144-88889-4 40
051144-88887-0 60
051144-88886-3 80
051144-88882-5 36 18"
051144-88880-1 60
051144-88878-8 36
20"
051144-88877-1 40
051144-88876-4 50
051144-88875-7 60
051144-88874-0 80
051144-20802-9 36
24"
051144-20801-2 40
051144-20798-5 80
3M PSA Discs
ATTENTION: See backup pad maximum operating speed for the
appropriate operating speed for the 3M Stikit and PSA Discs.
See pages 48–55 for available accessories.
681776
Coated Abrasives
17
3M Roloc Cloth Disc Selection Guide
Product ID Mineral Features Metal Type
Grind-
ing
Light
Grinding
Blend-
ing
Deburr-
ing
Good
361F Aluminum
Oxide
General purpose grinding, light grinding,
blending, and deburring on all metals All Metals
461F Silicon
Carbide
Ideal for grinding glass, titanium and
non-ferrousmetals Titanium
Better 777F Ceramic
A/O* Blend DurableYwt.Clothbacking;Grindingaid Stainless Steel,
Nickel Alloy
*A/O – Aluminum Oxide
3M Roloc Fiber Disc Selection Guide
Product ID Mineral Features Metal Type
Grind-
ing
Light
Grinding
Blend-
ing
Deburr-
ing
Good 501C Aluminum
Zirconia
Versatilediscforuseonawidevariety
ofmetals;Generalpurposegrinding,
blending and finishing on all metals
All Metals
Better 785C Ceramic
A/O* Blend Excellentforstainlesssteel;Grindingaid Stainless Steel
*A/O – Aluminum Oxide
3M Roloc Attachment System Guide
Attachment
Product ID TP
TR TSM TS
361F •••
461F
777F •••
501C
785C
Attachment
Diameter TP TR TSM TS
3/4"
1" ••••
1-1/2" ••••
2" ••••
3" ••••
4"
See pages 48–55 for available accessories.
24/Black
36/Brown
50/Green
60/Orange
80/Yellow
100/Blue
120/White
150/Black
180/Brown
240/Green
3M Roloc Disc Button Color/Grade Chart
3M Roloc Discs provide a fast, efficient method for grinding,
blending, leveling and finishing on all types of metal. They lock
securely in place with just a half twist…another half twist and
they’re off. Each disc is color coded by grade. (This does not
include 3M Roloc TSM products.)
3M Roloc Discs
Key: Colored square indicates recommended usage.
n Mild Steel n Stainless Steel
Material Type
Disc Size Stainless Aluminum Steel Titanium
1-1/2" 20,000 RPM 30,000 RPM 30,000 RPM 9,000 RPM
2" 15,000 RPM 20,000 RPM 20,000 RPM 7,000 RPM
3" 10,000 RPM 15,000 RPM 15,000 RPM 4,500 RPM
4" 8,000 RPM 9,000 RPM 9,000 RPM 3,000 RPM
Optimum Tool Speeds to Maximize 3M Roloc Disc Cut Rates and Life
159104
3M Roloc Disc 361F n
•Aluminumoxideona
YFwt.clothbacking
•Generalpurposegrinding,
blending and finishing on
all metals
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
051144-11412-2 36
30,000 1"
50/500
051144-11411-5 50
051144-11417-7 60
051144-11416-0 80
051144-11415-3 P100
051144-11414-6 P120
051144-11452-824
30,000 1-1/2"
051144-22396-1 36
051144-11137-4 50
051144-22397-8 60
051144-22407-4 80
051144-22408-1 P100
051144-22409-8 P120
051144-11000-1 24
25,000 2"
50/200
051144-22398-5 36
051144-22399-2 50
051144-22400-5 60
051144-22401-2 80
051144-22402-9 P100
051144-22403-6 P120
051144-14559-1 P150
051144-13873-9 P180
051144-11419-1 P240
051144-22392-3 24
20,000 3"
051144-22393-0 36
051144-22394-7 50
051144-22395-4 60
051144-22404-3 80
051144-22405-0 P100
051144-22406-7 P120
051144-82244-7 P150
051144-11418-4 P240
051144-76429-7 36
12,000 4" 25/100
051144-11421-4 60
051144-11420-7 80
† Made-to-Order
3M Roloc Disc 361F (cont.)
UPC Grade Max. RPM Diameter Min./Case
Roloc TSM (Metal Button)
051111-49932-0 36
30,000 1-1/2" 50/500
051111-49933-7 60
051111-49934-4 80
051111-51039-1 P100
051111- 51038-4P120
051111-49936-8 36
25,000 2"
50/200
051111-49937-5 60
051111-49938-2 80
051111-51034-6 P100
051111-49939-9 P120
051111-51033-9 36
20,000 3"
051111-49940-5 60
051111-49941-2 80
051111-49942-9 P100
051111-49943-6 P120
Roloc TP (Metal Button)
051111-82401-4 40
25,000 2"
50/200
051111-76806-6 60
051111-76810-3 80
051111-77115-8100
051111-22393-0 36
20,000 3"
051111-22394-7 50
051111-22395-4 60
051111-22404-3 80
051111-22405-0 P100
† Made-to-Order
Coated Abrasives
18
3M Roloc Discs (cont.)
See pages 48–55 for available accessories.
Coated Abrasives
19
524509
51704
3M Roloc Disc 461F
•Siliconcarbideona
YFwt.clothbackinggives
stainless steel a brighter finish
•Idealforgrindingglass,
titaniumandnon-ferrousmetals
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
051144-12956-0 P60 25,000 2"
50/200
051144-12954-6 P80
051144-12957-7 P60 20,000 3"
051144-12955-3 P80
3M Roloc Discs (cont.)
3M Roloc Disc 777F n
•3M Ceramic Aluminum Oxide
blend abrasive grain
•Clothbackingfordurability
•Grindingaidforcoolerrunning
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
051144-76622-2 36
30,000
1"
50/500
051144-76623-9 50
051144-76624-6 60
051144-76625-3 80
051144-80510-5 P120
051144-76626-0 36
1-1/2"
051144-76627-7 50
051144-76628-4 60
051144-14660-4 80
051144-80511-2 P120
051144-76629-1 36
25,000 2"
50/200
051144-76630-7 50
051144-76433-4 60
051144-14661-1 80
051144-80508-2 P100
051144-80512-9 P120
051144-76631-4 36
20,000 3"
051144-76632-1 50
051144-76633-8 60
051144-76634-5 80
051144-80509-9 P100
051144-80513-6 P120
424847
3M Roloc Fibre Disc 501C n
•Aluminumzirconia–Fibre
•Versatilediscforuseon
a wide variety of metals
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
051141-20645-5 36
25,000 2"
50/200
051111-50748-3 50
051111-50749-0 60
051111-50750-6 80
051111-50743-8 36
20,000 3"
051111-50744-5 50
051111-50745-2 60
Roloc TSM (Metal Button)
051111-50755-1 36
25,000 2"
50/200
051111-50756-8 50
051111-50757-5 60
051111-50758-2 80
051111-50751-3 36
20,000 3"
051111-50752-0 50
051111-50753-7 60
051111-50754-4 80
159108
See pages 48–55 for available accessories.
14494
3M Roloc Discs (cont.)
Threaded
Shaft
3M Roloc
Disc Pad
3M Roloc
Disc or Wheel
12873
3M Roloc Fibre Disc 785C n
 3 M Ceramic Aluminum Oxide blend
abrasive grain – Fibre
•Anexcellentstarting
point for stainless steel
•Includesagrindingaidforcoolerrunning
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
051144-85882-824
20,000 3"
50/100
051144-85883-5 36
051144-85884-2 50
051144-85885-9 60
051144-85886-6 80
051144-85887-3 P100 50/200
051144-85888-0 P120
051144-83690-1 36
12,000 4" 25/100
051144-83691-8 50
051144-83692-5 60
051144-83693-2 80
051144-83694-9 P100
051144-83695-6 P120
† Made-to-Order
431923
3M Roloc Disc 777F (cont.)
UPC Grade Max. RPM Diameter Min./Case
Roloc TSM (Metal Button)
051111-49949-8 36
25,000 2" 50/200
051111-50253-2 60
051111-50254-9 80
051111-50255-6 100
051111-50256-3 P120
051111-50257-0 36 20,000 3"
Roloc TP (Metal Button)
051144-76770-060 25,000 2"
50/200
051144-76743-4
36 20,000 3"
051144-76763-2
051144-76767-050
Roloc TS (Plastic Button)
051144-76742-7 36
25,000 2"
50/200
051144-76746-5 50
051144-76750-2 60
051144-76743-436
20,000 3"
051144-76747-250
051144-76751-9 60
051144-76755-7 80
† Made-to-Order
Coated Abrasives
20
See pages 48–55 for available accessories.
84685
Coated Abrasives
21
3M Belts
3Mistheone-stopshopforallofyourcoatedabrasive
metalworking belt needs! We offer a product tailored to nearly
every application and performance level. To select the best
productforyourapplication,checkoutoureasy-to-useBelt
SelectionGuide.Eachtierofproductoffersbest-in-class
performance at various price points. Once you have selected
the product, use the Availability Guide to select your grade.
The following section includes our most popular belt items, but
remember, we can provide any size belt that you might need!
Tech Tip
Keep Things Cool — When
working on heat sensitive alloys
like stainless steel, nickel alloys
and cobalt alloys, choose a
product with a grinding aid.
Life
Cut Rate
AZ
Ceramic
AO
Mineral
Backing
Flexible Durable
XJ Y
Abrasive Speed Recommendations
for Off-Hand Applications
Alloy
Belt Speed
(surface feet per minute)
Applicable
Belt Grades
Cast Iron 7,000 24–120
Carbon Steel 6,500 24–120
Stainless Steel 6,500–7,000 36–120
Nickel Alloys 6,000 36–120
Titanium 2,500–3,000 36–180
Aluminum 7,500–8,500 24–120
6,500–7,000 Fine Grades
Brass 7,000–8,000 36–180
Rubber 4,500 36–180
Glass 2,500–5,000 80–400
6,000–8,000
Stone 7,000 36–180
3M Coated Belt Availability Guide
3M ID Mineral Backing Grinding Aid Use Dry/Wet 400 320 240 220 180 150 120 100 80 60 50 40 36 24
241E Aluminum Oxide XE Dry P PPPPP
341D X Dry PPPPPPPP••••••
577F Alumina Zirconia YF Yes Dry/Wet ••••••••••
777F Ceramic A/O* Blend YF Yes Dry/Wet PPPP•••••
*A/O – Aluminum Oxide
ATTENTION: Belts are available in other grades and sizes.
If you need a specific belt not listed, contact your
3M Sales Specialist or 3M Authorized Distributor. See pages 48–55 for available accessories.
Coated Abrasives
22
241E
•Aluminumoxideonan
XEwt.clothbacking
•Highstrengthbackingfor
tougher applications
•Usewith3M File Belt Sander
UPC Grade W x L Min./Case
Portable Tool
051144-26733-0 60
1/4" x 24"
50/200
051144-26732-3 80
051144-26731-6 120
051144-31170-5 60
1/2" x 12"
051144- 26894-880
051144- 26892-4120
051144-72227-360
1/2" x 18"
051144-72228-0 80
051144-72229-7120
051144-26725-550
1/2" x 24"
051144-26723-1 60
051144-26720-0 80
051144-26719-4 100
051144-26717-0120
051144-26715-6 180
051144-26714-9 220
051144-14756-4 60
3/4" x 18"
051144-14519-5 80
051144-14667-3 120
† Made-to-Order
3M Belts (cont.)
51721
341D (cont.)
UPC Grade W x L Min./Case
Backstand, Benchtop, Portable Tool
051144-26443-8 36
1-1/2" x 60"
10/50
051144-26441-4 40
051144-26438-4 60 25/50
051144-26436-0 80
051144-26571-8 36
2" x 48"
10/50
051144-26568-8 50
051144-26564-0 60
25/50
051144-26562-6 80
051144-26561-9 P100
051144-26560-2 P120
051144-26424-7 50
2" x 60"
10/50
051144-33640-1 60
25/50
051144-33639-5 80
051144-33667-8 P120
051144-26320-2 36
2" x 72"
10/50
051144-26316-5 60
25/50
051144-33067-6 80
051144-26312-7 P120
051144-26309-7 P180
051144-81752-8 P240
051144-26408-7 36
2-1/2" x 60"
10/50
051144-26400-1 60
25/50
051144-26396-7 80
051144-26388-2 P120
051144-26857-3 60
3-1/2" x
15-1/2" 10/50
051144-26856-6 80
891040-02663-0 P120
891040-01436-1 36
4" x 24"
25
891040-01439-2 60 50
891040-01440-8 80
051144-33647-0 60 4 " x 132 " 25
891040-01454-5 36
6" x 48"
10/20
891040-01455-2 40
891040-01456-9 50
891040-01457-6 60
891040-10454-3 80
20
891040-10455-0 P100
891040-10456-7 P120
051144-26517-6 P150
051144-26515-2 P180
051144-26513-8 P240
051144-74271-4 P120 37" x 60" 5
051144-14420-4 80
37" x 75"
3
051144-33061-4 P120 5
051144-14508-9 P180
341D
•Aluminumoxideon
anXwt.clothbacking
•Excellentall-aroundabrasive
belt for blending and finishing
UPC Grade W x L Min./Case
Backstand, Benchtop, Portable Tool
051144-26614-2 36
1" x 42"
50/200
051144-31823-0 50
891040-01450-7 60
25/100
891040-01451-4 80
891040-01452-1 P100
891040-01453-8 P120
051144-26602-9 P150
50/200
051144-26601-2 P180
051144-26599-2 P240
051144-26597-8 P320
407921
51724
See pages 48–55 for available accessories.
Coated Abrasives
23
577F
•Aluminazirconia
onaYFwt.
cloth backing
•Resinbondedfor
heat resistance
•Featuresagrindingaidforcoolergrinding
•Canberunwetordry
UPC Grade W x L Qty./Case
051141-30690-2 60
1/4" x 18"
50/200
051141-30691-9 80
051141-30708-4 120
051141-30694-0 60
1/4" x 24"
051119-05580-1 80
051141-30695-7 120
051111-68668-3 60
1/2" x 12"
051111-68695-9 80
051141-30709-1 120
051141-30686-5 36
1/2" x 18"
051119-63081-7 60
051119-82035-5 80
051141-30689-6 120
051141-30693-3 36
1/2" x 24"
051111-68669-0 60
051111-68696-6 80
051111-69436-7 120
051141-30687-2 36
3/4" x 18"
051115-19553-2 60
051125-19076-3 80
051141-30688-9 120
051125-16745-1 60
3/4" x 20-1/2"
051111-68697-3 80
051125-22333-1 120
051119-71425-8 60
1" x 18"
051125-23878-6 80
051141-30692-6 120
051115-19554-9 60
2" x 48"
25/50
051119-05579-5 80
051125-11238-3 120
051141-30699-5 36
2" x 60"
051111-69103-8 60
051141-30703-9 80
051141-30704-6 120
407921
3M Belts (cont.)
577F (cont.)
UPC Grade W x L Qty./Case
051141-30698-8 36
2" x 72"
25/50
051111-69104-5 60
051141-30701-5 80
051141-30697-1 120
051111-67602-8 36
2" x 132"
051141-30702-2 50
051111-69105-2 60
051111-69108-3 80
051141-30696-4 120
051119-64999-4 36
2-1/2" x 60"
051111-69106-9 60
051125-12707-3 80
051141-30706-0 120
051111-69099-4 36
3" x 132" 25/50
051119-82066-9 50
051111-69569-2 60
051111-69571-5 80
051111-67681-3 120
051119-67701-060
3-1/2" x 15-1/2" 50
051119-58968-980
051119-67700-3120
051111-67604-2 36
4" x 132" 25
051115-27562-3 50
051111-69570-8 60
051111-69573-9 80
051125-23987-5 120
051111-69445-9 60
6" x 48" 20
051119-83855-8 80
051141-30707-7 120
† Made-to-Order
777F
•3M Ceramic Aluminum
Oxide blend abrasive grain
onaYFwt.clothbacking
•Containsgrindingaidwhich
enhances performance on
stainless steel and other
exotic alloys
•Canberunwetordry
UPC Grade W x L Min./Case
Backstand, Benchtop, Portable Tool
051144-84403-6 60
1/4" x 18" 200
051144-85318-2 80
051144-19579-2 P120
407921
See pages 48–55 for available accessories.
686785
Coated Abrasives
24
ATTENTION: Belts are available in other grades and sizes.
If you need a specific belt not listed, contact your
3M Sales Specialist or 3M Authorized Distributor.
777F (cont.)
UPC Grade W x L Min./Case
Backstand, Benchtop, Portable Tool
051144-84412-8 40
1/4" x 24"
200
051144-80253-1 60
051144-77642-9 80
051144-82229-4 P120
051111-69457-2 60
1/2" x 12"
051144-85372-4 80
051111-69604-0 P120
051144-84301-5 36
1/2" x 18"
051144-84409-8 40
051144-80551-8 60
051144-80232-6 80
051144-84304-6 P120
051144-77643-6 36
1/2" x 24"
051144-82342-0 40
051144-77408-1 50
051144-77065-6 60
051144-77491-3 80
051144-81064-2 P120
051144-84302-2 36
3/4" x 18"
051144-84404-3 60
051144-77992-5 80
051144-84303-9 P120
051144-80486-3 60 3/4" x 20-1/2"
051144-80686-7 80
051125-23897-7 60
1" x 18"
051144-85319-9 80
051141-30705-3 P120
051144-76527-0 40
1" x 42" 50/200
051144-77512-5 60
051144-14895-0 80
051144-84416-6 60
1-1/2" x 60" 25/50
051144-76731-1 80
051144-82022-1 P120
051144-76738-0 36
2" x 48"
10/50
051144-76519-5 60 25/50
051144-14896-7 80
051144-85393-9 P120
50
051144-77663-4 36
2" x 60"
051144-77152-3 60
051144-84296-4 80
051144-85377-9 P120
3M Belts (cont.)
777F (cont.)
UPC Grade W x L Min./Case
Backstand, Benchtop, Portable Tool
051144-76531-7 36
2" x 72"
50
051144-80286-9 60
051144-14884-4 80
051144-81767-2 P120
051144-14264-4 36
2" x 132"
051144-14899-8 50
051144-82231-7 60
051144-14534-8 80
051144-81687-3 P120
051144-84315-2 P180
051144-76532-4 36
2-1/2" x 60"
051144-77825-6 40
051144-76680-2 60
051144-76686-4 80
051115-27389-6 P120
051144-76533-1 36
3" x 132"
25
051111-69455-8 50
051144-76520-1 60
051144-76514-0 80
051144-80028-5 P120
50
051144-85762-3 P180
051144-77336-7 36
3-1/2" x
15-1/2"
051144-77334-3 50
051144-77476-0 60
051144-77333-6 80
051144-84306-0 100
051144-84307-7 P120
051144-85320-5 P180
051144-76534-8 36
4" x 132"
25
051111-67851-0 50
051144-80707-9 60
051144-76515-7 80 25/50
051141-30700-8 P120 25
051144-82313-0 36
6" x 48"
10/20
051144-80176-3 50
051144-76679-6 60
20
051144-76733-5 80
051144-82153-2 P120
See pages 48–55 for available accessories.
Coated Abrasives
25
3M Utility Cloth Sheet and Roll Selection Guide
Product ID Mineral Backing Features Blending Finishing Cleaning
Good 011K Aluminum Oxide Flexible
UtilityCloth ClosedCoat;Generalpurposeuse
Better 211K Aluminum Oxide Flexible
UtilityCloth Useforallgeneralmaintenancework
Best 314D Premium
Aluminum Oxide Durable Cloth Strong bonding system for shelling resistance
Utility Cloth Sheets and Rolls
3M Utility Cloth Sheets 011K
•Aluminumoxidemineral
•Generalpurposeuse
UPC Grade W x L Min./Case
Sheets
051144-02433-9 CRS
9" x 11" 50/250
051144-02432-2 MED
051144-02431-5 FINE
209216
3M Utility Cloth Sheets and Rolls 211K
•AluminumoxideonaJwt.clothbacking
•Usetheseflexibleutilityrollsandsheets
for general applications such as deburring,
rust removal, strapping
and all general maintenance work
UPC Grade W x L Min./Case
Sheets
051144-02410-0 80
9" x 11" 50/250
051144-02409-4 100
051144-02408-7 120
051144-02407-0 150
051144-02406-3 180
051144-02405-6 220
051144-02404-9 240
051144-02402-5 320
051144-12501-2 400
051144-12500-5 500
3M Utility Cloth Sheets and Rolls 211K (cont.)
UPC Grade W x L Min./Case
Utility Rolls
051144-05010-9 80
1" x 50 yds.
1/5
051144-05009-3 100
051144-05008-6 120
051144-05007-9 150
051144-05006-2 180
051144-05005-5 220
051144-05004-8 240
051144-05003-1 280
051144-05002-4 320
051144-05001-7 400
051144-05000-0 500
051144-05030-7 80
1-1/2" x 50 yds.
051144-05029-1 100
051144-05028-4 120
051144-05027-7 150
051144-05026-0 180
051144-05025-3 220
051144-05024-6 240
051144-05022-2 320
051144-05021-5 400
051144-05020-8 500
051144-05050-5 80
2" x 50 yds.
051144-05049-9 100
051144-05048-2 120
051144-05047-5 150
051144-05046-8 180
051144-05045-1 220
051144-05044-4 240
051144-05042-0 320
051144-05041-3 400
051144-05040-6 500
See pages 48–55 for available accessories.
A good choice for all your utility sanding and general maintenance work. Can be torn and rolled without shelling.
ATTENTION: Belts are available in other grades and sizes.
If you need a specific belt not listed, contact your
3M Sales Specialist or 3M Authorized Distributor.
Coated Abrasives
26
3M Utility Cloth
Sheets and Rolls 314D
•Aluminumoxideon
XandJwt.clothbackings
•Idealforallutilityjobs
•Canbetornintostripsand
rolled without shelling
UPC Grade Backing W x L Min./Case
Sheets
051115-19775-8 P40
X wt.
9" x 11" 50/250
051115-19774-1 P50
051115-19773-4 P60
051115-19772-7 P80
J wt.
051115-19771-0 P100
051115-19770-3 P120
051115-19769-7 P150
051115-19768-0 P180
051115-19767-3 P220
051115-19766-6 P240
051115-19765-9 P280
051115-19764-2 P320
051115-19763-5 P400
Utility Rolls
051115-19794-9 P50 X wt.
1" x 50 yds. 1/5
051115-19793-2 P60
051115-19792-5 P80
J wt.
051115-19791-8 P100
051115-19790-1 P120
051115-19789-5 P150
051115-19788-8 P180
051115-19787-1 P220
051115-19786-4 P240
051115-19785-7 P280
051115-19784-0 P320
051115-19783-3 P400
Utility Cloth Sheets and Rolls (cont.)
380124
3M Utility Cloth Sheets and Rolls 314D (cont.)
UPC Grade Backing W x L Min./Case
Utility Rolls
051115-19813-7 P50 X wt.
1-1/2" x 50
yds.
1/5
051115-19812-0 P60
051115-19811-3 P80
J wt.
051115-19810-6 P100
051115-19809-0 P120
051115-19808-3 P150
051115-19807-6 P180
051115-19806-9 P220
051115-19805-2 P240
051115-19804-5 P280
051115-19803-8 P320
051115-19802-1 P400
051115-19826-7 P40
X wt.
2" x 50 yds.
051115-19825-0 P50
051115-19824-3 P60
051115-19823-6 P80
J wt.
051115-19822-9 P100
051115-19821-2 P120
051115-19820-5 P150
051115-19819-9 P180
051115-19818-2 P220
051115-19817-5 P240
051115-19816-8 P280
051115-19815-1 P320
051115-19814-4 P400
See pages 48–55 for available accessories.
Coated Abrasives
27
3M Paper Sheets 336U
•Aluminumoxideona
C wt. paper backing
•Medium-weightsheetsfor
general-purposesanding
•Opencoatresistsloadingonsoftmaterials
UPC Grade W x L Min./Case
051144-02114-7 100
9" x 11" 100/1000
051144-02113-0 120
051144-02112-3 150
209205
3M Paper Sheets 210N
•Aluminumoxideonan
A wt. paper backing
•OpenCoat
•Providesexceptional
conformability for contour sanding
UPC Grade W x L Min./Case
051144-02104-8 180 9" x 11" 100/1000
051144-02103-1 220
3M Paper Sheets 346U
•Aluminumoxideona
D wt. paper backing
•Idealforhandormachinesanding
of many different materials, including
woods, metals, paints, plastics and fiberglass
UPC (051144-) Grade W x L Min./Case
051144-02119-2 36
9" x 11"
50/250
051144-02118-5 40
051144-02117-8 50
50/500
051144-02116-1 60
051144-02115-4 80
209207
3M Wetordry Paper Sheets 431Q
•SiliconcarbideonaCwt.
paper backing
•Reducedcloggingeliminates
dust when used wet
•Heavyweightpaperbackingfor
increased durability
UPC Grade W x L Min./Case
051144-02018-8 80
9" x 11" 50/250
051144-02017-1 100
051144-02016-4 120
051144-02015-7 150
051144-02014-0 180
199309
3M Wetordry Sheets 413Q
•SiliconcarbideonanAwt.
paper backing
•Reducedcloggingeliminates
dust when used wet
•Excellentconformability
UPC Grade W x L Min./Case
051144-02007-2 220
9" x 11"
50/500
051144-02006-5 240 50/250
051144-02005-8 280
051144-02004-1 320 50/500
051144-02003-4 360 50/250
051144-02002-7 400 50/500
209204
3M Wetordry Sheet Selection Guide
Product ID Mineral Backing Blending Finishing
431Q Silicon
Carbide
C wt. Paper
413Q A wt. Paper
3M Paper Sheet Selection Guide
Product
ID Mineral Backing Blending Finishing
Good 210N Aluminum
Oxide
A wt.
Paper
Better 336U Aluminum
Oxide
C wt.
Paper
Best 346U Aluminum
Oxide
D wt.
Paper
See pages 48–55 for available accessories.
3M Wetordry Sheets
Still a favorite for their reduced loading, long life and great finish.
Good general use abrasive for hand or machine sanding. Can be
run wet or dry.
3M Paper Sheets
Conformable and versatile, 3M Paper Sheets are ideal for hand
ormachinesanding.Variousconstructionsavailableforuseon
wood, metal, paint, plastic and fiberglass.
Coated Abrasives
28
See pages 48–55 for available accessories.
3M Flap Wheels
Coated Abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals.
The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. Available in both flange mounted
and spindle mounted constructions with general purpose aluminum oxide or high performing 3M Ceramic Aluminum Oxide
blend abrasive grain.
3M Flange Mounted Flap Wheels
3M Flap Wheels 241E/244E
•Aluminumoxideona
flexibleXEwt.clothbacking
•Longlifeandfastcut
•Generalpurposeflapwheels
at a value price
UPC Grade Max. RPM Dia. x W x AH Qty./Case
051144-35113-8 60
6,100 6" x 1" x 1"
5
051144-35112-1 80
051144-35111-4 100
051144-35109-1 120
051144-35088-9 60 5,200 6" x 2" x 1"
051144-35086-5 80
Additional sizes are available.
51742
3M Flap Wheels 741A
•3M Ceramic Aluminum Oxide
blend abrasive grain on a durable
Xwt.clothbacking
•Longerlifeandfastercut
UPC Grade Max. RPM Dia. x W x AH Qty./Case
051144-82770-1 50
6,100 6" x 1" x 1" 5
051144-81986-7 60
051144-81984-3 80
Additional sizes are available.
51742
3M Flange Mounted Flap Wheel Selection Guide
Material Product ID Mineral Grade
Better Carbon Steel 241E Aluminum Oxide 50–320
244E Aluminum Oxide 60–120
Best Stainless Steel 741A Ceramic Aluminum Oxide Blend 50–120
Diameter Arbor Hole
>3"–4-1/2" 5/8"
>4-1/2"–6" 1"
> 6" – 8" 1"or1-1/4"
> 8" – 10" 1-3/4"or2"
3M Flap Wheels 241E/244E and 741A can be
made-to-order in the following sizes:
524290
Coated Abrasives
29
See pages 48–55 for available accessories.
Material Product ID Mineral Grade
Better Carbon Steel 244D Aluminum Oxide 60–120
Best Stainless Steel 747D Ceramic Aluminum Oxide Blend 36–150
3M Spindle Mounted Flap Wheel Selection Guide
3M Flap Wheels 747D — T83 and T84
•3M Ceramic Aluminum Oxide blend
abrasivegrainonaresin-bonded
Xwt.clothbacking
•Includesagrindingaidforcooler
running on stainless steel
UPC Grade Max. RPM Dia. x W x Shk Qty./Case
T83; 1/4" Straight
051144-80761-1 60
30,000 1" x 1" x 1/4"
10
051144-80757-4 80
051144-80753-6 P120
051144-80763-5 60
25,000 2" x 1" x 1/4"
051144-80759-8 80
051144-80755-0 P120
051144-80650-8 60
20,000 3" x 1" x 1/4"
051144-80651-5 80
051144-80652-2 P120
T84; 1/4–20 Threaded
051144-83271-2 60
25,000 2" x 1" x
1/420 EXT
10
051144-83268-2 80
051144-83265-1 P120
051144-83269-9 60
20,000 3" x 1" x
1/420 EXT
051144-83267-5 80
051144-83263-7 P120
3M Flap Wheels 244D — T83 and T84
•Aluminumoxide
•Generalpurposeflapwheeldelivers
consistent finish and uniform cut
UPC Grade Max. RPM Dia. x W x Shk Qty./Case
T83; 1/4" Straight
051144-35475-7 60
30,000 1" x 1" x 1/4"
10
051144-35476-4 80
051144-35477-1 120
051144-14623-9 60
25,000 2" x 1" x 1/4"
051144-14624-6 80
051144-14625-3 120
051144-14655-0 60
20,000 3" x 1" x 1/4"
051144-14656-7 80
051144-14657-4 120
T84; 1/420 Threaded
051144-35467-2 60
30,000 1" x 1" x
1/420 EXT
10
051144-35468-9 80
051144-35469-6 120
051144-14575-1 60 25,000 2" x 1" x
1/420 EXT
051144-14576-8 80
051144-14607-9 60 20,000 3" x 1" x
1/420 EXT
051144-14608-6 80
3M Spindle Mounted Flap Wheels
T84 — 1/4" x 20
Threaded
T83 — 1/4"
Straight
Coated Abrasives
30
3M Cartridge Rolls 341D
•AluminumoxideonanXwt.clothbacking
•Longlifeandfastcut
•Generalpurposecartridgerolls
at a value price
UPC Grade Max. RPM Dia. x L x CH Qty./Case
Regular
051144-96959-3 P60
24,000
1/4" x 1" x 1/8"
100
051144-14021-3 P80
051144-96961-6 P120
051144-96963-0 P180
051144-96968-5 P60
1/4" x 1-1/2" x 1/8"
051144-96969-2 P80
051144-96971-5 P120
051144-96973-9 P180
051144-14024-4 P60
3/8" x 1" x 1/8"
051144-14023-7 P80
051144-14022-0 P120
051144-97008-7 P180
051144-97013-1 P60
3/8" x 1-1/2" x 1/8"
051144-20417-8 P80
051144-97015-5 P120
051144-97017-9 P180
051144-97041-4 P60
1/2" x 1" x 1/8"
051144-97042-1 P80
051144-97044-5 P120
051144-14028-2 P60
1/2" x 1-1/2" x 1/8"
051144-14027-5 P80
051144-14026-8 P120
051144-97059-9 P180
051144-97162-6 P60
16,000 3/4" x 1-1/2" x
3/16"
051144-97163-3 P80
051144-97165-7 P120
3M Cartridge Rolls 341D (cont.)
UPC Grade Max. RPM Dia. x L x CH Qty./Case
Full Taper
051144-97239-5 P60
24,000
3/8" x 1" x 1/8"
100
051144-97240-1 P80
051144-97242-5 P120
051144-97244-9 P180
051144-97248-7 P60
3/8" x 1-1/2" x 1/8"
051144-97249-4 P80
051144-97251-7 P120
051144-97257-9 P60 1/2" x 1" x 1/8"
051144-97259-3 P120
051144-14034-3 P60
1/2" x 1-1/2" x 1/8"
051144-14033-6 P80
051144-14032-9 P120
051144-97267-8 P180
51754
3M Cartridge Rolls 747D
•3M Ceramic Aluminum Oxide
blendabrasivegrainonanXwt.
cloth backing
•Longlifeandfastcut
•Containsgrindingaid
for cooler cutting on
heat sensitive alloys
UPC Grade Max. RPM Dia. x L x CH Qty./Case
Regular
051144-80790-1 60
24,000 1/2" x 1-1/2" x 1/8" 100
051144-80796-3 80
051144-80792-5 P120
Full Taper
051144-80786-4 60
24,000 1/2" x 1-1/2" x 1/8" 100
051144-80787-1 80
051144-80788-8 P120
14378
See pages 48–55 for available accessories.
3M Cartridge Rolls
Cartridge rolls are ideal for getting into small, hard to reach
spaces. As they wear, the wrapped layers of the cartridge roll
continuously expose fresh abrasive layers for continued cutting
action. Available in regular and tapered construction.
Coated Abrasives
31
See pages 48–55 for available accessories.
3M Square Pads 341D
•Premiumaluminumoxideonan
Xwt.clothbacking
•Longlifeandfastcut
•Generalpurposesquarepadsatavalueprice
UPC Grade Max RPM Size Min./Case
1/4"– 20 Eyelet
051141-27353-260
12,000
2" x 2" x 3/8"
50/100
051141-27354-980
051141-27355-6P120
051141-27350-1 60
2" x 2" x 1/2"
051141-27351-8 80
051141-27352-5 P120
051144-97723-9
9,000
3" x 3" x 1/4"
051141-27356-360
3" x 3" x 1/2"
051141-27357-080
051141-27358-7P120
† Made-to-Order
3M Square Pads 747D
•3M Ceramic Aluminum Oxide
blendabrasivegrainonanXwt.
cloth backing
•Superaggressivecutrateanddurability
•Containsgrindingaidforcooler
cutting on heat sensitive alloys
UPC Grade Max RPM Size Qty./Case
1/4"– 20 Eyelet
051141-27359-460
12,000
2" x 2" x 1/2"
100
051141-27360-080
051141-27361-7P120
051141-27362-460
2" x 2" x 3/8"
051141-27363-180
051141-27364-8P120
051141-27365-560
9,000 3" x 3" x 1/2"
051141-27366-280
051141-27367-9P120
† Made-to-Order
3M Cross and Square Pads
Cross pads are used for close tolerance polishing of small radii
and channels, deburring the ends and insides of tubing, and other
special applications.
Squarepadsareidealforfastgrinding/blendingofchannels,
fillets,andcorners,plusspottingonflatsurfaces.Asthesquare
pads rotate, the corners exert a fast biting action and gradually
wear down to expose fresh abrasive material.
3M Cross Pads 341D
•Premiumaluminumoxideonan
Xwt.clothbacking
•Longlifeandfastcut
•Generalpurposesquarepadsatavalueprice
UPC Grade
Max
RPM Size
Min./
Case
8 or 10 Ply; 8"– 32 Eyelet
051141-27368-6 60
24,000
1" x 1" x 3/8"
50/100
051141-27369-3 80
051141-27370-9P120
051141-27371-6 60
1-1/2" x 1-1/2" x 1/2"
051141-27372-3 80
051141-27373-0 P120
10 Ply; 8"– 32 Eyelet
051141-27374-7 60
18,000
2" x 2" x 1/2"
051141-27375-4 80
051141-27376-1 P120
051141-27377-8 60
2" x 2" x 3/4"
051141-27378-5 80
051141-27379-2 P120
051144-97750-5 60 2-1/2" x 2-1/2" x 3/4"
8 or 10 Ply; 1/4"– 20 Eyelet
051141-27380-8 60
18,000 3" x 3" x 1"
051141-27381-5 80
051141-27382-2P120
051144-97760-4 60 3" x 3" x 1-1/2"
051144-97766-6 80 15,000 3-1/2" x 3-1/2" x 1-1/2"
051144-97768-0
60
12,000 4" x 4" x 1"
051144-98880-2 10,000 5" x 5" x 1-1/2"
051144-97783-3 9,000 6" x 6" x 1-1/2"
† Made-to-Order
3M Cross Pads 747D
•3M Ceramic Aluminum Oxide blend
abrasivegrainonanXwt.clothbacking
•Superaggressivecutrateanddurability
•Containsgrindingaidforcooler
cutting on heat sensitive alloys
UPC Grade
Max
RPM Size
Qty./
Case
8 Ply; 1/4"– 20 Eyelet
051141-20368-3 60
24,000 1-1/2" x 1-1/2" x 1/2"
100
051141-20369-0 80
051141-20372-0 P100
051141-20379-9 P120
051141-20380-5 60
18,000 2" x 2" x 1/2"
051141-20367-6 P100
051141-20375-1 80 2" x 2" x 3/4"
† Made-to-Order
51756
14426
Coated Abrasives
32
3M Bands 747D
•3M Ceramic Aluminum Oxide blend
abrasivegrainonanXwt.clothbacking
•Longlifeandfastcut
•Containsgrindingaidforcooler
cutting on heat sensitive alloys
UPC Grade Max. RPM Dia. x W Qty./Case
051144-80765-9 50
15,000 1/2" x 1"
100
051144-80769-7 60
051144-80773-4 80
051144-80766-6 50
18,000 1" x 1"
051144-80770-3 60
051144-80774-1 80
051144-80782-6 P120
051144-80771-0 60
11,000 2" x 1"
051144-80775-8 80
051144-80783-3 P120
3M Bands 341D
•Aluminumoxideonand
Xwt.clothbacking
•Fastcutandlonglife
•Generalpurposeevenrun
bands at a value price
UPC Grade Max. RPM Dia. x W Qty./Case
051144-40243-4 P80 23,000 1/4" x 1/2"
100
051144-97428-3 P120
051144-27446-7 P36
30,000 1/2" x 1/2"
051144-40228-1 P60
051144-40227-4 P80
051144-40252-6 P120
051144-97458-0 P36
15,000 1/2" x 1"
051144-40225-0 P60
051144-40224-3 P80
051144-11973-8 P120
051144-11976-9 P36
17,000 3/4" x 1"
051144-40221-2 P60
051144-40220-5 P80
051144-40219-9 P120
051144-11977-6 P36 10,000 3/4" x 1-1/2"
051144-40241-0 P80
051144-40214-4 P36
18,000 1" x 1"
051144-40211-3 P60
051144-40210-6 P80
051144-40208-3 P120
051144-40207-6 P36
10,000 1" x 1-1/2"
051144-11980-6 P60
051144-40205-2 P80
051144-40203-8 P36 14,000 1-1/2" x 1"
051144-40202-1 P60
051144-40200-7 P36
10,000 1-1/2" x 1-1/2"
051144-40197-0 P60
051144-40196-3 P80
051144-40274-8 P120
3M Bands 341D (cont.)
UPC Grade Max. RPM Dia. x W Qty./Case
051144-40267-0 P60 8,000 1-1/2" x 2"
051144-40192-5 P60 11,000 2" x 1"
051144-40187-1 P36
6,000 2" x 2"
051144-40184-0 P60
051144-40183-3 P80
051144-40178-9 P36
3,000 3" x 3" 50
051144-40175-8 P60
051144-40174-1 P80
051144-40172-7 P120
14426
See pages 48–55 for available accessories.
3M Bands
Greatforgettingatthosehard-to-reachplacesandcontours.Idealforremovingpartinglines,imperfectionsandburrs.
Usewith3M Die Grinders and 3M Rubber Slotted Expander Wheel or 3M Rubber Cushion Polishing Wheel.
51717
Scotch-Brite Roloc Clean and Strip Discs
Aggressively removes paint, rust and
seam sealers
Open web construction for cool running
and resistance to loading and smearing
Faster cutting than wire brushes and
wheels to increase production
UPC Grade Max. RPM Size Qty./Case
048011-14784-0 S XCS 8,000 4" x 1" 10
048011-14780-2 4" x 1" x 1/4"
Scotch-Brite Discs
Scotch-Brite Roloc SE Surface Conditioning Discs
This coarse, tough, aggressive non-woven disc is ideal
for heavy-duty deburring and finishing
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
048011-18081-6 A CRS
25,000 2" 50/200
048011-18471-5 A MED
048011-30005-4 A FIN
048011-18082-3 A CRS
18,000 3" 25/100
048011-18472-2 A MED
048011-93453-2 A FIN
159116
Scotch-Brite Roloc SC Surface Conditioning Discs (cont.)
UPC Grade Max. RPM Diameter Min./Case
Roloc TSM (Metal Button)
048011-25765-5 A CRS
25,000 2" 50/200
048011-25764-8 A MED
048011-25770-9 A VFN
048011-25767-9 A CRS
18,000 3" 25/100
048011-13257-0
048011-25766-2 A MED
048011-13258-7
048011-25780-8 A VFN
048011-13259-4
048011-13260-0A SFN
† Made-to-Order
Scotch-Brite Roloc SC
Surface Conditioning Discs
Scotch-Brite surface conditioning
non-woven web provides a
burr-free decorative finish
Removes grind marks, rust and coatings
• Grade: A VFN – Blue; A MED – Maroon; A CRS Brown
UPC Grade Max. RPM Diameter Min./Case
Roloc TP (Metal Button)
048011-13237-2 A CRS 25,000 2" 50/200
048011-13241-9 18,000 3" 25/100
048011-13243-3A VFN
Roloc TR (Plastic Button)
048011-15393-3 A CRS
30,000
1" 200
048011-15392-6 A MED
048011-15391-9 A VFN
048011-15568-5A SFN
048011-08764-1 A CRS
1-1/2"
50/200
048011-08765-8 A MED
048011-08766-5 A VFN
048011-08767-2A SFN
048011-05528-2 A CRS
25,000 2"
048011-05527-5 A MED
048011-05522-0 A SFN
048011-05523-7 A VFN
048011-05532-9 A CRS
18,000 3"
25/100
048011-05531-2 A MED
048011-05529-9 A SFN
048011-05530-5 A VFN
048011-12954-9 A CRS
12,000 4"
048011-12953-2 A MED
048011-12951-8A SFN 100
048011-12952-5 A VFN 25/100
Roloc TSM (Metal Button)
048011-13249-5
A CRS
30,000 1-1/2" 50/200
048011-25775-4
048011-25774-7A MED
048011-25773-0A VFN
† Made-to-Order
33
Surface Conditioning Abrasives
See pages 48–55 for available accessories.
Make tough jobs easier. Scotch-Brite Discs can help you achieve a burr-free, paintable finish in fewer steps without damaging the
base material. The non-woven, open web, durable construction is designed to resist loading and greatly increase the life of the disc.
As a result, you will not have to change it as often. However, when you do change your disc, the Roloc attachment or Hook-and-Loop
attachment makes it fast and easy.
Scotch-Brite Roloc Discs
Scotch-Brite Roloc Discs
Scotch-Brite Roloc
Clean and Strip XT Disc
Silicon carbide mineral
• Durable, rigid, long lasting
Aggressive, open-web disc
for cleaning welds, removing
rust and paint
UPC Grade Max. RPM Diameter Min./Case
Roloc TR (Plastic Button)
048011-30147-1 S XCS 18,000 2" x NH 60
048011-30016-0 15,000 3" x NH 40
524504
Scotch-Brite Roloc Bristle Discs
Efficiently clean and strip many
substances from metal surfaces
without damaging the work piece
An operator can quickly and easily achieve
a quality, consistent finish with light pressure
UPC Grade Color Max. RPM Size Min./Case
Roloc TR (Plastic Button)
048011-18698-6 50 Green
30,000 1" 20/80
048011-18706-8 80 Yellow
048011-18710-5 120 White
048011-18730-3 50 Green
25,000 2"
10/40
048011-18732-7 80 Yellow
048011-18733-4 120 White
048011-18734-1 50 Green
15,000 3"
048011-18736-5 80 Yellow
048011-18737-2 120 White
431922
Scotch-Brite Roloc
EXL Unitized Wheels
Strong, efficient products for
edge deburring and finishing
Used with 3M Rolocor
3M Roloc+ holder pads on
a straight shaft or right-angle tool
UPC Grade Max. RPM Size Qty./Case
Roloc TR (Plastic Button)
048011-17185-2 2A MED
22,100 2" 60
048011-17183-8 2S FIN
048011-17190-6 6A MED
048011-17192-0 8A MED
048011-17186-9 2A MED
15,100 3" 40
048011-17184-5 2S FIN
048011-17191-3 6A MED
048011-17193-7 8A MED
179831
Scotch-Brite Roloc Coating Removal Discs
Extra coarse grade silicon carbide
Heavy duty, semi-open web
used to clean rust and paint
• Color: Black
UPC Grade Max. RPM Diameter Qty./Case
048011-18364-0
S XCS
18,000 2" 60
048011-18350-3 15,000 3" 40
048011-18470-8 11,000 4"
Scotch-Brite Roloc
Body Man’s Bristle Disc
Contains 3M Ceramic Aluminum
Oxide blend abrasive grain
Removes high loading materials
fast and doesn’t load
Great for removing rubberized
undercoating, seam sealer, rust and paint
• Maintains high quality product life
UPC Grade Max. RPM Diameter Min./Case
051131-07540-5
36
30,000 1" 6/36
051131-07536-8 25,000 2" 4/24
051131-07537-5 18,000 3" 3/18
461797
34
Surface Conditioning Abrasives
See pages 48–55 for available accessories.
Threaded
Shaft
3M Roloc
Disc Pad
3M Roloc
Disc or Wheel
12873
35
Surface Conditioning Abrasives
Scotch-Brite Discs —
Hook-and-Loop
Scotch-Brite SC Surface Conditioning
Discs (Hook-and-Loop)
Aluminum oxide
Great general purpose surface
conditioning disc
For finishing, cleaning,
and light deburring
Attach and remove easily to 3M Hook-and-Loop Backup Pads
Use with right angle and random orbital tools
UPC Grade Color Max. RPM Diameter Min./Case
Hook-and-Loop
048011-07458-0 A CRS Brown
23,000 2" 50/200
048011-07459-7 A MED Maroon
048011-04276-3 A VFN Blue
048011-04127-8A SFN Gray
048011-04120-9 A CRS Brown
20,000 3"
25/100
048011-04124-7 A MED Maroon
048011-04277-0 A VFN Blue
048011-04129-2 A SFN Gray
100
048011-04128-5
048011-07450-4 A CRS Brown
13,000
4"
048011-07451-1 A MED Maroon
048011-04278-7 A VFN Blue
048011-04129-2 A SFN Gray
048011-14101-5 A CRS Brown
4-1/2"
50
048011-27671-7 10
048011-27672-4 A MED Maroon
048011-14100-8
50
048011-14099-5 A VFN Blue
048011-14102-2 A SFN Gray
048011-27674-8 A CRS Brown
10,000 5"
10
048011-00750-2 50
048011-27675-5 A MED Maroon 10
048011-00643-7 50
048011-27676-2 A VFN Blue 10
048011-04303-6
50
048011-00647-5 A SFN Gray
048011-03927-5 A CRS Brown
8,000 6"
048011-03928-2 A MED Maroon
048011-04304-3 A VFN Blue
† Made-to-Order
Scotch-Brite SC Surface Conditioning Discs
(Hook-and-Loop) (cont.)
UPC Grade Color Max. RPM Diameter Min./Case
Hook-and-Loop
048011-27677-9 A CRS Brown
6,000
7"
10
048011-00751-9 25
048011-27678-6 A MED Maroon 10
048011-00645-1 25
048011-27679-3 A VFN Blue 10
048011-04305-0
25
048011-00648-2 A SFN Gray
048011-00752-6 A CRS Brown
8"
048011-00670-3 A MED Maroon
048011-04306-7 A VFN Blue
048011-00649-9A SFN Gray
048011-13325-6A CRS Brown
600 48" 2
048011-13100-9A MED Maroon
048011-13099-6A VFN Blue
048011-18385-5A SFN Gray
† Made-to-Order
134361
3M Disc Holder (Hook-and-Loop)
Surface Conditioning Disc
12873
Scotch-Brite Clean and Finish Discs
(Hook-and-Loop)
Flexible web for finishing,
blending and polishing
Conformability allows access
to hard-to-reach areas
UPC Grade Max. RPM Diameter Qty./Case
048011-16001-6
A VFN
5,000 5" 100
048011-00661-1 4,000 6"
048011-30037-5 1,900 11-1/4" 25
Scotch-Brite Coating Removal Discs
(Hook-and-Loop)
Extra coarse grade silicon carbide
Made for right-angle tools from
aggressive Clean & Strip web
Non-loading design ideal for removing rust and coatings
Mount on Hook-and-Loop Disc Pad Holders
UPC Grade Max. RPM Diameter Min./Case
Hook-and-Loop
048011-18424-1
S XCS
12,000 4-1/2" 4/20
048011-18482-1* 40
048011-18355-8 10,000 5" 4/20
048011-18483-8* 40
048011-18358-9 6,000 7" 2/10
048011-18485-2* 20
* Bulk
375428
See pages 48–55 for available accessories.
36
Surface Conditioning Abrasives
Scotch-Brite Discs —
TN Quick Change
Scotch-Brite Clean and Strip XT Disc, TN Quick Change
Extra coarse grade silicon carbide
• Mounts quickly to 4-1/2" and 7" grinders
Tough open web, ideal for weld
cleaning and removing paint and coatings
Use with TN Quick Change back up pad
or fibre disc hub and face plate
UPC Grade
Max.
RPM Dia. x Thk. X AH
Min./
Case
048011-33194-2 S XCS 13,300 4-1/2" x 1/2" x 5/8–11* 10
048011-33196-6 8,600 7" x 1/2" x 5/8–11* 5
* Quick Change Tinneman Nut Attachment
148243
Scotch-Brite Bristle Discs
Easily remove paint, stains,
adhesives, weld burn, rust
and other surface contaminants
from large areas
UPC Grade Color Max. RPM Diameter x AH Qty./Case
048011-33054-9 36 Brown
12,000 4-1/2" x
5/8–11 INT 10
048011-24241-5 50 Green
048011-24242-2 80 Yellow
048011-24243-9 120 White
424848
Scotch-Brite Discs —
Spindle Mount
360837
Scotch-Brite High
Strength Discs
Aluminum oxide
Very conformable discs,
ideal for light deburring,
cleaning and finishing
UPC Grade Max. RPM Dia. x Ctr. Hole Min./Case
Use with Mandrel 933
048011-05629-6A MED
4,000 6" x 1/4"
100
048011-27748-6 A VFN 10/40
048011-00666-6 100
Use with Mandrel 934
048011-27745-5 A MED
4,000 6" x 1/2"
10/40
048011-04188-9 100
048011-27747-9 A VFN 10/40
048011-00665-9 100
048011-93477-8A MED
3,000
8" x 1/4" 50
048011-00673-4 A VFN
048011-27746-2 A MED
8" x 1/2"
10/20
048011-03992-3 50
048011-27749-3 A VFN 10/20
048011-00672-7 50
† Made-to-Order
14463
Scotch-Brite
Clean and Strip Discs
Extra coarse grade silicon carbide
Tough open web, ideal for weld
cleaning and removing paint and coatings
UPC Grade Max. RPM Dia. x Ctr. Hole Qty./Case
Use with Mandrel 934
048011-00941-4
S XCS
6,000 4" x 1/2" 25
048011-00948-3 4,000 6" x 1/2" 15
048011-00957-5 3,000 8" x 1/2"
51717
See pages 48–55 for available accessories.
37
Surface Conditioning Abrasives
Scotch-Brite SC Surface
Conditioning Belts
Premium Scotch-Brite
surface conditioning
non-woven web
Designed for
cleaning, finishing
and light deburring
UPC Grade Color W x L Qty./Case
Portable, Benchtop and Backstand
048011-13290-7A CRS Brown
1/4" x 18"
20
048011-14276-0 A MED Maroon
048011-13230-3A VFN Blue
048011-13132-0 A CRS Brown
1/4" x 24"
048011-13131-3 A MED Maroon
048011-13287-7 A VFN Blue
048011-08858-7 A CRS Brown
1/2" x 18"
048011-08857-0 A MED Maroon
048011-08856-3 A VFN Blue
048011-05741-5 A CRS Brown
1/2" x 24"
048011-03998-5 A MED Maroon
048011-04299-2 A VFN Blue
048011-13639-4 A CRS Brown
3/4" x 18"
048011-15899-0 A MED Maroon
048011-14543-3 A VFN Blue
048011-14278-4 A CRS Brown
1" x 18"
10
048011-14398-9A MED Maroon
048011-17517-1A VFN Blue
048011-04189-6 A MED Maroon 1" x 42"
048011-04190-2 A VFN Blue
048011-08913-3A MED Maroon 1" x 132" 5
048011-08915-7 A MED Maroon 2" x 48"
10
048011-04295-4 A VFN Blue
048011-08883-9A CRS Brown
2" x 72"
048011-00580-5 A MED Maroon
048011-00579-9 A VFN Blue
† Made-to-Order
407921
ATTENTION: Belts are available in other grades and sizes.
If you need a specific belt not listed, contact your
3M Sales Specialist or 3M Authorized Distributor.
Scotch-Brite SC Surface Conditioning Belts (cont.)
UPC Grade Color W x L Qty./Case
Portable, Benchtop and Backstand
048011-03999-2 A MED Maroon 2" x 132" 5
048011-04297-8 A VFN Blue
048011-05022-5 A CRS Brown 2-3/4" x 15-1/2"
10
048011-05227-4 A MED Maroon
048011-05820-7 A CRS Brown
3" x 10-11/16"
048011-05783-5 A MED Maroon
048011-09650-6 A VFN Blue
048011-14284-5A CRS Brown
3" x 18"
048011-14285-2 A MED Maroon
048011-14550-1 A VFN Blue
048011-08880-8 A CRS Brown
3" x 24"
048011-00583-6 A MED Maroon
048011-04298-5 A VFN Blue
048011-05023-2 A CRS Brown
3" x 132" 5
048011-00568-3 A MED Maroon
048011-04289-3 A VFN Blue
048011-05016-4 A CRS Brown
3-1/2" x 15-1/2"
10
048011-05228-1 A MED Maroon
048011-05643-2 A VFN Blue
048011-08882-2A CRS Brown 4" x 24"
048011-00585-0A MED Maroon
048011-05018-8A CRS Brown
4" x 132"
5
048011-00570-6 A MED Maroon
048011-04281-7 A VFN Blue
048011-05019-5 A CRS Brown
6" x 48"
048011-00590-4 A MED Maroon
048011-04283-1 A VFN Blue
† Made-to-Order
Scotch-Brite Surface Conditioning Belts
591391
See pages 48–55 for available accessories.
The easiest way to a perfect finish. Choose Scotch-Brite Surface
Conditioning Belts for cleaning, finishing, blending and deburring. The
reinforced backing offers good flexibility whether working on a file belt or
backstand. The non-woven material combined with abrasive grain is an ideal
way to add a great finish or remove burrs without gouging or undercutting
the work piece. Trust Scotch-Brite belts to deliver fantastic finishes.
14496
38
Surface Conditioning Abrasives
Scotch-Brite EXL
Deburring Wheels
Use to clean, finish, blend,
deburr or polish all types of
metals, composites and glass
Silicon carbide mineral
UPC Grade Max. RPM Size Qty./Case
048011-13616-5 8A MED
6,000
6" x 1/2" x 1" 4
048011-09548-6 8S FIN
048011-05790-3 9S FIN
048011-13617-2 8A MED
6" x 1" x 1" 3
048011-18278-0 8S MED
048011-09549-3 8S FIN
048011-05132-1 9S FIN
048011-13618-9 8A MED 6" x 2" x 1" 2
048011-05133-8 9S FIN
048011-14791-8 8S FIN
4,500
8" x 3/8" x 3"
4
048011-17459-4 8A MED
8" x 1/2" x 3"
048011-14629-4 8S FIN
048011-05791-0 9S FIN
048011-13619-6 8A MED
8" x 1" x 3" 3
048011-18279-7 8S MED
048011-09551-6 8S FIN
048011-05135-2 9S FIN
048011-13620-2 8A MED
8" x 2" x 3"
2
048011-09552-3 8S FIN
048011-05136-9 9S FIN
048011-05137-6 9S FIN 3,600 10" x 1" x 5"
048011-15641-5 8S FIN
3,000
12" x 1/2" x 5"
048011-09005-4 9S FIN
048011-13621-9 8A MED
12" x 1" x 5"
1
048011-18281-0 8S MED
048011-09554-7 8S FIN
048011-05138-3 9S FIN
048011-13622-6 8A MED
12" x 2" x 5"
048011-09555-4 8S FIN
048011-05139-0 9S FIN
048011-13623-3 8A MED 2,550 14" x 2" x 8"
048011-05141-3 9S FIN
14497
Scotch-Brite
Multi-Finishing Wheels
Produces uniform grain finishes on
stainless steel and other metals
• Highly conformable
UPC Grade Max. RPM Dia. x W x AH Qty./Case
048011-13170-2 2S CRS
6,000
6" x 1" x 1" 3
048011-13171-9 2S MED
048011-13172-6 2S FIN
048011-13176-4 2S CRS
6" x 2" x 1" 2
048011-13177-1 2S MED
048011-13178-8 2S FIN
048011-13183-2 2S MED
4,500
8" x 1" x 3" 3
048011-13184-9 2S FIN
048011-13185-6 2S CRS 8" x 2" x 3" 2
048011-13186-3 2S MED
Scotch-Brite Light
Deburring Wheel
Designed to provide a clean and
economical system for removing
fine burrs, yet resulting in a highly
polished finish
Ideal for fine deburring, polishing and
finishing because of its conformability
UPC Grade Max. RPM Dia. x W x AH Qty./Case
048011-03993-0 6S FIN
6,000
6" x 1/2" x 1" 4
048011-01662-7 7S FIN
048011-03994-7 8S FIN
048011-01660-3 6S FIN
6" x 1" x 1" 3
048011-01661-0 7S FIN
048011-01675-7 8S FIN
048011-01664-1 7S FIN 6" x 2" x 1" 2
048011-05263-2 7S FIN
4,500
8" x 1/2" x 3" 4
048011-01678-8 8S FIN
048011-01665-8 6S FIN
8" x 1" x 3" 3
048011-01666-5 7S FIN
048011-01679-5 8S FIN
048011-01667-2 7S FIN 8" x 2" x 3"
2
048011-01683-2 7S FIN 3,600 10" x 1" x 5"
048011-05181-9 7S FIN
3,000
12" x 1/2" x 5"
048011-01669-6 6S FIN
12" x 1" x 5"
1
048011-01670-2 7S FIN
048011-01686-3 8S FIN
048011-01672-6 6S FIN
12" x 2" x 5"
048011-01673-3 7S FIN
048011-01689-4 8S FIN
048011-01690-0 7S FIN 12" x 3" x 5"
048011-17985-8 7S FIN 2,250 16" x 2" x 10"
51736
Scotch-Brite Wheels
94536
ATTENTION: Wheels are available in other grades and sizes.
If you need a specific wheel not listed, contact your
3M Sales Specialist or 3M Authorized Distributor.
See pages 48–55 for available accessories.
Get high performance and durability in a variety of cleaning,
deburring, finishing and polishing applications. Used on right
angle grinders and bench tools, Scotch-Brite Wheels produce
great results on all types of metal, composites and glass.
Scotch-Brite Convolute Wheels
39
Surface Conditioning Abrasives
ATTENTION: Wheels are available in other grades and sizes.
If you need a specific wheel not listed, contact your
3M Sales Specialist or 3M Authorized Distributor.
Scotch-Brite Convolute Wheels (cont.)
Scotch-Brite Metal Finishing Wheels
Provides a consistent and uniform
decorative brushed finish
Use to match #3 and #4 mill finishes
Removes minor imperfections and
handling marks
UPC Grade Max. RPM Size Qty./Case
048011-05394-36A CRS
6,000
6" x 1/2" x 1" 4
048011-05391-25A MED
048011-01861-4 4A CRS
6" x 1" x 1"
3
048011-01863-8 5A CRS
048011-01866-9 6A CRS
048011-01860-74A MED
048011-01862-1 5A MED
048011-01865-2 6A MED
048011-30012-25A CRS 6" x 1" x 1-1/4"
048011-24110-45A MED
048011-01868-3 4A CRS
6" x 2" x 1" 2
048011-01888-1 5A CRS
048011-01870-66A CRS
048011-01867-6 4A MED
048011-01869-0 5A MED
048011-01889-86A MED
048011-01891-14A CRS 6" x 3" x 1"
1
048011-08891-44A MED 6" x 4" x 1"
048011-09118-15A CRS 6" x 6" x 1"
048011-14336-15A CRS
4,500
8" x 1/2" x 3" 4
048011-16449-65A MED
048011-05414-84A CRS
8" x 1" x 3" 3
048011-01872-0 5A CRS
048011-01901-7 6A CRS
048011-08926-34A MED
048011-01871-3 5A MED
048011-01900-06A MED
048011-92896-85A CRS 8" x 1-1/2" x 3"
2
048011-01875-14A CRS
8" x 2" x 3"
048011-01904-8 5A CRS
048011-13453-66A CRS
048011-01874-4 4A MED
048011-01876-8 5A MED
048011-01905-56A MED
† Made-to-Order
96879 Scotch-Brite Metal Finishing Wheels (cont.)
UPC Grade Max. RPM Size Qty./Case
048011-15608-85A CRS
4,500 8" x 3" x 3" 1
048011-13451-26A CRS
048011-13452-94A MED
048011-05395-05A MED
048011-25612-26A MED
048011-15607-15A MED
3,000
12" x 1/2" x 5" 2
048011-05398-15A CRS
12" x 1" x 5"
1
048011-15062-86A CRS
048011-01916-1 5A MED
048011-08924-96A MED
048011-25619-16A MED 12" x 1-1/4"
x 5"
048011-25621-46A CRS 12" x 1-1/2"
x 5"
048011-15326-15A MED
048011-09612-44A CRS
12" x 2" x 5"
048011-13449-9 5A CRS
048011-13448-26A CRS
048011-01921-54A MED
048011-01882-9 5A MED
048011-14617-16A MED
048011-13446-84A CRS
12" x 3" x 5"
048011-08902-75A CRS
048011-92916-34A MED
048011-08929-45A MED
048011-16422-95A MED 12" x 3-1/2" x
5"
048011-13445-14A CRS
12" x 4" x 5"
048011-13071-25A CRS
048011-18634-46A CRS
048011-25615-34A MED
048011-05392-95A MED
† Made-to-Order
See pages 48–55 for available accessories.
40
Surface Conditioning Abrasives
ATTENTION: Wheels are available in other grades and sizes.
If you need a specific wheel not listed, contact your
3M Sales Specialist or 3M Authorized Distributor.
51730
Scotch-Brite EXL Unitized
Deburring Wheels
Strong and efficient for deburring
and polishing of all metal alloys
Excellent in resisting smearing
and minimizing heat buildup on
the work piece
Conformable wheel in a variety
of densities and grades for
maximum cut and durability
UPC Grade Max. RPM Dia. x W x AH Qty./Case
048011-15516-6 8A CRS
35,100
1" x 1/8" x 1/8" 100
048011-15517-3 6A MED
048011-13734-6 2S FIN 1" x 1/4" x 1/8"
048011-13752-0 8A CRS
1" x 1" x 3/16" 50
048011-15527-2 2A MED
048011-14063-6 6A MED
048011-13753-7 8A MED
048011-13713-1 2S FIN
048011-15514-2 8A CRS
30,100
1-1/2" x 1/8" x
3/16"
80
048011-15515-9 6A MED
048011-13714-8
2S FIN
1-1/2" x 1/4"
x 1/8"
048011-14746-8 1-1/2" x 1/4"
x 3/16"
048011-15511-1 8A CRS 22,100 2" x 1/8" x 3/16"
60
048011-15512-8 6A MED
048011-13736-0 2S FIN 16,100 2" x 1/4" x 1/8"
048011-15513-5 2S FIN 2" x 1/4" x 3/16"
048011-13755-1 8A CRS 22,100
2" x 1/4" x 1/4"
048011-15529-6 2A MED
16,100
048011-13932-6 2S FIN
048011-13715-5 2S FIN 2" x 1/2" x 1/4" 30
048011-15462-6 8A MED 18,100 3" x 1/8" x 1/4"
40
048011-13763-6 8A CRS
3" x 1/4" x 1/4"
048011-15531-9 2A MED 12,100
048011-14067-4 6A MED 18,100
048011-13764-3 8A MED
048011-13716-2 2S FIN 12,100
048011-13766-7 8A CRS 18,100
3" x 1/4" x 3/8"
048011-16054-2 2A MED 12,100
048011-15118-2 6A MED 18,100
048011-14753-6 8A MED
048011-14750-5 2S FIN 12,100
048011-14751-2 4A FIN 18,100
048011-14752-9 6S FIN
Scotch-Brite Unitized Wheels
Scotch-Brite EXL Unitized Deburring Wheels (cont.)
UPC Grade Max. RPM Dia. x W x AH Qty./Case
048011-13767-4 8A CRS 15,100
3" x 1/2" x 1/4" 20
048011-15532-6 2A MED
10,000
048011-13717-9 2S FIN
048011-13718-6 2S FIN 3" x 3/4" x 1/4" 10
048011-13739-1 8,500 4" x 1/4" x 1/4" 20
048011-17498-3 2A MED 4,500 6" x 1/4" x 1/2" 8
048011-13741-4 2S FIN 5,000
048011-25678-8 6" x 1/4" x 3/4"
048011-15534-0 2A MED 4,500 6" x 1/2" x 1/2"
4
048011-13719-3 2S FIN 5,000
048011-15831-0 6" x 1/2" x 5/8"
048011-16545-5 2A MED 4,500 6" x 1/2" x 1"
048011-14379-8 2S FIN 5,000
048011-13742-1 6" x 1" x 1/2"
2
048011-16544-8 2A MED 4,500 6" x 1" x 1"
048011-13743-8
2S FIN
5,000
048011-15827-3
4,000
8 x 1/4 x 1/2 8
048011-15844-0 8" x 1/2" x 1/2" 4
048011-15824-2 8" x 1/2" x 3/4"
048011-15817-4 2,600 12" x 1/2" x
1-1/4" 2
Scotch-Brite Roloc
EXL Unitized Wheels
Strong, efficient products for
edge deburring and finishing
Used with 3M Rolocor
3M Roloc+ holder pads on
a straight shaft or right-angle tool
UPC Grade Max. RPM Size Qty./Case
Roloc TR (Plastic Button)
048011-17185-2 2A MED
22,100 2" 60
048011-17183-8 2S FIN
048011-17190-6 6A MED
048011-17192-0 8A MED
048011-17186-9 2A MED
15,100 3" 40
048011-17184-5 2S FIN
048011-17191-3 6A MED
048011-17193-7 8A MED
179831
See pages 48–55 for available accessories.
41
Surface Conditioning Abrasives
Scotch-Brite Specialty Abrasives
524406
Scotch-Brite Flap Brush
CPFB-S and CPFB-R+
Heavy-duty brush
Excellent for removing handling
marks and surface imperfections
Available on 1/4" shaft (CPFB-S)
or 3M Roloc+ attachment system (CPFB-R+)
UPC Grade Max. RPM Dia. x W x (Shaft) Qty./Case
CPFB-S
048011-16622-3 A MED 12,000 2" x 1" x 1/4" 25
048011-05974-7 8,500 3" x 1-3/4" x 1/4" 10
CPFB-R+
048011-14588-4 A MED 8,000 3" x 1-3/8" 10
51748
Scotch-Brite Flap Brush
CFFB-S and CFFB-R
Ideal for decorative finishes
and light deburring applications
Available on 1/4" shaft (CFFB-S)
or 3M Roloc+ attachment
system (CFFB-R)
UPC Grade Max. RPM Dia. x W x (Shaft) Qty./Case
CFFB-S
048011-05975-4 A CRS 8,500 3" x 1-3/4" x 1/4" 10
048011-14781-9 S FIN
CFFB-R
048011-14587-7 A CRS 8,000 3" x 1-3/8" 10
048011-14783-3 S FIN
160008
Scotch-Brite Clean and Strip
Discs D2
Rigid and aggressive web
is excellent for cleaning
welds, rust, paint
and coatings
UPC Grade Max. RPM Dia. x W x Shaft Qty./Case
048011-14780-2 S XCS 8,000 4" x 1" x 1/4" 10
048011-14784-0 4" x 1" 8
51747
Scotch-Brite CPD5-R and CPD5-S Discs
Five discs made of a durable web,
ganged together on a shaft
Use for satin or antique finishing
as well as light- to medium-duty
cleaning applications
Available on a 1/4" shaft (CPD5-S) or
3M Roloc+ attachment system (CPD5-R)
UPC Grade Max. RPM Dia. x W x (Shaft) Qty./Case
CPD5-S
048011-14593-8 A MED 10,000 3" x 1-1/4" x 1/4" 10
048011-14779-6 8,000 4" x 1-1/4" x 1/4"
CPD5-R
048011-14594-5 A MED 10,000 3" x 1-1/4" 10
048011-14590-7 8,000 4" x 1-1/4"
159131
Scotch-Brite Combi Wheel, Combi-S
Made of alternating flaps of coated
abrasive and Scotch-Brite web
Provides aggressive cut
and fine finishes
UPC Grade Max. RPM Dia. x W x Shaft Qty./Case
CFFB-S
051144-80801-4 80
8,000 3" x 1-3/4" x 1/4" 10
051144-80678-2 P120
051144-80799-4 P180
51752
See pages 48–55 for available accessories.
Make tough jobs easy with these Scotch-Brite specialty
abrasives. Unique constructions for use on contours and flat
areas — on metal, wood, paint, coatings and more.
Scotch-Brite Specialty Abrasives (cont.)
Scotch-Brite Stars
Perfect for polishing internal
diameters of pipe and tubing
Conformable Scotch-Brite
construction assures complete
cleaning and polishing of all surfaces
UPC Grade Max. RPM Diameter Qty./Case
048011-13370-6 A CRS
24,000
1-1/2"
100
048011-13800-8 A VFN
048011-13371-3 A CRS 2"
048011-13803-9 A VFN
048011-13372-0 A CRS
18,000
3"
50
048011-13802-2 A VFN
048011-13373-7 A CRS 4"
048011-13804-6 A VFN
524413
Scotch-Brite Cross Buffs
Versatile and flexible shape
ideal for light deburring, cleaning,
finishing and polishing internal
diameters and hard to reach areas
Available in A VFN for high luster finishes or A MED for
more aggressive applications requiring increased durability
UPC Grade Max. RPM Diameter Qty./Case
048011-64299-4 A MED
20,000
1" x 3/8" x
2 PLY x 8-32
50
048011-64446-2 A VFN
048011-64305-2 A MED 1-1/2" x 3/8" x
2 PLY x 8-32
048011-64526-1 A VFN
048011-64447-9 A VFN 1-1/2" x 1/2" x
2 PLY x 8-32 100
048011-64312-0 A MED 12,000 2" x 1/2" x
2 PLY x 8-32 25
048011-64433-2 A VFN
42
Surface Conditioning Abrasives
524413
See pages 48–55 for available accessories.
43
Surface Conditioning Abrasives
Scotch-Brite Hand Pad Selection Guide
Blending Finishing Deburring Cleaning
Good Multi-Flex Multi-Flex Multi-Flex
Better 7446, 7447 7440, 7447, 7448 7447
Best 7440, 8447 7446, 8447 7440 8447
Scotch-Brite Hand Pads
Excellent products for hand
finishing and cleaning of woods,
metals and composites
Ideal for wood finishing, paint
prep and general cleaning
UPC Grade Color Cat. No. W x L Qty./Case
048011-04050-9 A MED Tan 7440
6" x 9"
40
048011-04051-6 S MED Gray 7446
048011-04029-5
A VFN Maroon
7447
60
048011-04229-9 7447 Bulk
048011-24037-4 8447
048011-04028-8 S ULF Light Gray 7448
Scotch-Brite Hand Pads
424851
Less Aggressive/Finer Finish More Aggressive/Coarser Finish
Scotch-Brite
Ultra Fine Hand
Pad 7448 (Gray)
Ultra fine consistent
finishes on metals,
woods, plastics
and composites
Provides similar
performance as
steel wool grade 00
Scotch-Brite General
Purpose Hand Pad
7447 (Maroon)
Standard for
surface conditioning
worldwide
Clean, blend, finish,
and deburr faster,
easier and with
better results
than conventional
abrasives
Provides similar
performance as
steel wool grade 1
Scotch-Brite
Production Hand
Pad 8447 (Maroon)
High cut for paint
preparation, blending,
and scuffing
Long life performance
on aluminum,
stainless steel,
plastics, wood and
fiberglass
Provides similar
performance as
steel wool grade 2
Scotch-Brite
Blending Hand
Pad 7446 (Gray)
Specially designed
for hand blending
and finishing
stainless steel
Mineral coarseness
blends surface
scratches on many
metals, wood and
synthetic surfaces
Provides similar
performance as
steel wool grade 3
Scotch-Brite
Heavy Duty Hand
Pad 7440 (Tan)
Most durable and
aggressive pad for
quick stock removal
Cuts fast to remove
contaminants and
oxides in the most
demanding cleaning
and finishing
applications
Provides similar
performance as
steel wool grade 4
See pages 48–55 for available accessories.
Scotch-Brite Production
Clean and Finish Rolls
Precision web/mineral
configuration for most uniform
general purpose finishing in roll form
Excellent for critical finishes and long life
UPC Grade Color W x L Qty./Case
048011-28175-9
A VFN Maroon 4" x 30' 3
048011-28176-66" x 30' 2
† Made-to-Order
14399
Scotch-Brite Multi-Flex Sheet Rolls
Highly conformable non-woven
web roll is perforated to easily
tear into sixty 8" x 4" sheets
Excellent sharpness and
conformability for cleaning
and finishing surfaces by hand
UPC Grade Color W x L Qty./Case
051131-07521-4 A VFN Maroon 8" x 20' 2
051131-07522-1 S ULF Light Gray
51768
601735
Scotch-Brite Cut and Polish Rolls
A unique and aggressive material
for cleaning and finishing
Sturdy, long lasting web
material is great for heavy
industrial cleaning and light
deburring applications
Works well for stropping and
other bench applications
UPC Grade W x L Qty./Case
048011-04085-1
A MED
1" x 30'
2
048011-05206-9 2" x 30'
048011-05207-6 4" x 30'
14432
Scotch-Brite Clean and Finish Rolls
Highly conformable
Scotch-Brite web can
be cut to desired length
for hand sanding or
oscillating sanders
UPC Grade W x L Min./Case
048011-00291-0A FIN 2" x 30'6
048011-00260-6 A VFN
048011-00261-3 3" x 30'4
048011-00264-4 A MED
4" x 30'3
048011-00265-1 A FIN
048011-00266-8 A VFN
048011-00270-5
048011-00263-7 F SFN
048011-00267-5
048011-00268-2 S ULF
048011-00262-0 TALC
048011-00274-3 A MED
6" x 30'2
048011-00275-0 A FIN
048011-00276-7 A VFN
048011-00284-2 12" x 30'1
048011-00254-5 TALC
† Made-to-Order
51764
Scotch-Brite Roll and Sheet Roll Selection Guide
Blending Finishing Deburring Cleaning
Good Multi-Flex Multi-Flex Multi-Flex
Better Clean and Finish Clean and Finish Clean and Finish
Best Cut and Polish Production Clean and Finish Cut and Polish Production Clean and Finish
44
Surface Conditioning Abrasives
See pages 48–55 for available accessories.
Product Mineral Type
All Metals
Better General
Purpose
Aluminum
Oxide T27
Best 3M Green
Corps
3M Ceramic
abrasive grain
T27
T27 Flexible
T27 Cut
and Grind
T28 Depressed
Center
Type 27
227096
3M General Purpose Type 27 Wheel
•AluminumOxideMineral
•Durablewheelprovidesexceptionally
longlifeatavalueprice
•Excellent,economicalchoicefor
generalpurposegrindingonsteel
UPC Grade
Max.
RPM Dia. x Thk. x AH
Qty./
Case
051135-92312-2
24
13,300 4-1/2" x 1/4" x 7/8" 40
051135-92314-6 4-1/2" x 1/4" x 5/8–11 INT
051135-92313-9 8,500 7" x 1/4" x 7/8" 20
051135-92315-3 7" x 1/4" x 5/8–11 INT
357083
3M Green Corps Type 27
Depressed Center Wheel
 3 M Ceramicabrasivegrain
•Providesexceptionallyfastcut
andlonglife
•Usewithrightanglegrinderswithaguard
UPC Grade Max. RPM Dia. x Thk. x AH Qty./Case
051111-61010-7 24 15,000 4" x 1/4" x 3/8" 60
051111-55991-8 24
13,300
4-1/2" x 1/4" x 7/8"
40
051111-55992-5 36
051111-55960-4 24 4-1/2" x 1/4" x
5/8–11 INT
051111-55961-1 36
051111-55989-5 24
8,500
7" x 1/4" x 7/8"
20
051111-55990-1 36
051111-55958-1 24 7" x 1/4" x
5/8–11 INT
051111-55959-8 36
051111-55987-1 24 6,600 9" x 1/4" x 7/8"
051111-55956-7 24 9" x 1/4" x 5/8–11 INT
3M Green Corps Type 27
Flexible Grinding Wheel
 3 M Ceramicabrasivegrain
•Smoothrunningwheelsproduceless
noiseandvibrationwhengrinding
•Canbeusedonawidevarietyofmetals
•Mustbeusedonatoolwithaguard
UPC Grade Max. RPM Dia. x Thk. x AH Qty./Case
051111-50440-6 36
13,300 4-1/2" x 1/8" x 7/8" 20/40
051111-50442-0 46
051111-50443-7 60
051111-50444-4 80
051111-50445-1 36
8,500 7" x 1/8" x 7/8" 20/20
051111-50446-8 46
051111-50447-5 60
148220
3M Green Corps Type 27
Cutting and Grinding Wheel
 3 M Ceramicabrasivegrain
•Safetogrindouterfaceandcut
withedgeofsamewheel
UPC Grade
Max.
RPM Dia. x Thk. x AH
Qty./
Case
051135-92316-0
36
13,300 4-1/2" x 1/8" x 7/8" 40
051135-92318-4 4-1/2" x 1/8" x 5/8–11 INT
051135-92317-7 8,500 7" x 1/8" x 7/8" 20
051135-92319-1 7" x 1/8" x 5/8–11 INT
For safe applications using cut-off wheels, refer to ANSI B-7.1
for details. ALWAYS use appropriate wheel guards.
Refer to ANSI B-186.1 for guarding requirements.
BondedAbrasives
45
See pages 48–55 for available accessories.
3M Bonded Wheels
Durableandfastcuttingwheelsforyourtoughestgrindingand
cuttingapplications.Runwith3MGrindersor3MCut-Off
WheelToolsforoptimalperformance.Foruseonallmetals.
DO NOT USE ON TOOLS WITHOUT GUARDS.
3M Bonded Type 27 Wheels
Product Mineral Type
All Metals
Better General
Purpose
Aluminum
Oxide T1
Best
3M Green
Corps3M Ceramic
abrasive grain
T1
High
Performance T1
3M High Performance Cut-Off Wheel
 3 M Ceramicabrasivegrain
•Providesfastercutandlongerlifeon
varioussubstratesincludingstainlesssteel
•MustbeusedwithANSI-approvedflangesfor
Type1cut-offwheels
•Do not use on tools without guards
UPC Max. RPM Dia. x W x AH Min./Case
051141-20349-2 10,200 6" x .045" x 7/8" 50/200
3M General Purpose Cut-Off Wheels
•Valuepricedwheelprovides
fastcutandlonglife
•Bestoncarbonsteel
•MustbeusedwithANSI-approved
flangesforType1cut-offwheels
•Do not use on tools without guards
UPC Max. RPM Dia. x W x AH Min./Case
051141-20447-5 10,200 6" x .045" x 7/8"
50/100
051141-20448-2 21,000 4" x 1/32" x 3/8"
051141-20449-9 4" x 1/16" x 3/8"
3M Cut-Off Wheels
3M Cut-Off Wheels (cont.)
3M Green Corps Cut-Off Wheels
 3 M Ceramicabrasivegrain
•Provideshighcutratesand
longlifeonvarioussubstrates,
includingfiberglass,stainlesssteel
andcarbonsteel
•MustbeusedwithANSI-approvedflanges
forType1cut-offwheels
•Do not use on tools without guards
UPC Max. RPM Dia. x W x AH Qty./Case
051144-83487-7 42,000 2" x 1/16" x 1/4" 50/50
051144-82238-6 35,000 3" x 1/32" x 1/4"
051131-01989-8 35,000 3" x 1/32" x 3/8"
5 wheels/pack
10 packs/case
051131-01985-0 50/50
051131-01990-4 28,000 3" x 1/16" x 3/8"
5 wheels/pack
10 packs/case
051131-01986-7 50/50
051144-83488-4 21,000 4" x 1/16" x 3/8" 50/50
051144-88755-2 26,250 4" x 1/32" x 1/4"
051131-01994-2 26,250 4" x 1/32" x 3/8" 50/50
051141-20275-4 13,300 4-1/2" x 3/64" x 7/8" 50/200
051141-20276-1 12,200 4-59/64" x 3/64" x 7/8"
213792
3M Green Corps T-28
Depressed Center Wheel
•Madewith3MCeramicabrasive
grainforfastcutratesandlonglife
•T28shapeworkswellwhengrinding
atlowertoolangles(15–25degrees)
•Greatforweldremoval,grindingintight
areasandotherMROapplications
UPC Grade
Max.
RPM Dia. x Thk. x AH
Qty./
Case
051141-28327-2 24 8,500 7" x 1/4" x 5/8 INT 10
Type 28
For safe applications using cut-off wheels, refer to ANSI B-7.1
for details. ALWAYS use appropriate wheel guards.
Refer to ANSI B-186.1 for guarding requirements.
BondedAbrasives
46
See pages 48–55 for available accessories.
3M Bonded Type 28 Wheels
Kits and Packs
47
Kits and Packs
3M NTN Maintenance and Repair Kit
Variety of easy mounting (no mounting tools
required) coated and surface conditioning
4-1/2" discs for use on right angle tools
Contains 1 each of the following:
– 3M TN Disc Pad
– Scotch-Brite Light Grinding and
Blending Disc, TN, Super Duty
– Scotch-Brite Clean and Strip XT Disc, TN, S XCS
– 3M Fibre Disc 785C, TN, grade 36
– 3M Flap Disc 747D, TN, grade 36
UPC (048011-) Size Min./Case
33013-6 4-1/2" 1/5
291768
3M Roloc Disc Pack 982S and 983S
Includes Roloc Surface Conditioning Discs, 3M Coated
Abrasive Discs and 3M Roloc Disc Pad
UPC (051144-) Catalog No. Size Min./Case
82899-9 982S 2" 1/5
82900-2 983S 3"
3M Roloc Disc Pack 985S
Contains a variety of grades of 2" and 3" non-woven
3M Roloc Surface Conditioning Discs
• Also contains 2" and 3" disc pads and 1/4" threaded shaft
UPC (048011-) Size Min./Case
18254-4 2" and 3" 1/5
3M Roloc Bristle
Disc Pack 983BS
Contains a variety of grades of
3M Roloc Bristle Discs
3" diameter x 5/8" trim
• Includes a disc pad holder
UPC (048011-) Size Min./Case
18697-9 3" 1/5
14374
Scotch-Brite Surface
Conditioning Disc Pack 920S
Contains a variety of grades
of 2" and 3" non-woven
surface conditioning discs
Used for cleaning, finishing,
blending and deburring applications
• Includes 922 and 923 disc pad holder
UPC (048011-) Size Min./Case
18253-7 2" and 3" 1/5
312784
Scotch-Brite Surface
Conditioning Disc Pack
9145S, 915S, 917S
Contains a variety of
grades of non-woven
surface conditioning discs
Used for cleaning, finishing,
blending and deburring applications
• Includes 9145 disc pad holder
UPC (048011-) Max RPM Catalog No. Size Min./Case
14105-3 13,000 9145S 4-1/2"
1/5
08713-9 10,000 915S 5"
04270-1 6,000 917S 7"
312741
9145S Shown
Scotch-Brite Unitized Wheel
Pack 990S
Contains several Scotch-Brite
external Unitized Wheels
1" x 1" x 3/16" and 3" x 1/4" x 3/8"
in a variety of densities and grades
• Also includes 936 and 990 mandrels
UPC (048011-) Size Min./Case
18245-2 1" x 1" x 3/16" and 3" x 1/4" x 3/8" 1/5
352098
Scotch-Brite Hand Pad
Trial Pack 961S
Contains 1 each of the following:
Scrubbing Sponge 74
– Light Duty Pad 6448
– Heavy Duty Pad 7440
– Light Duty Cleansing Pad 7445
– Blending Pad 7446
– General Purpose Pad 7447
– Ultra Fine Pad 7448
– Production Pad 8447
– Twist-Lok Pad Holder 961
UPC (048011-) Size Min./Case
17144-9 6" x 9" 5
119534
For appropriate product maximum operating
speed, see kit package safety insert.
Accessories
48
Product Name UPC Qty./Case For Use With Size/Description Max RPM
3M Fibre Disc Accessories
3M Disc Pad Hub
051141-28442-2
10
Short shaft tools2-1/2" Diameter;
3/8–24 metal insert
N/A
051144-45205-7 3M Disc Pad Face Plates
(all sizes)
2-1/2" Diameter;
5/8–11 metal insert
051144-88743-9
3M Disc Pad Face Plates
(all sizes, tool shaft
length 1/2" or less)
051144-45190-6 3M Disc Pad Face Plates
(7" or larger)
4-1/2" Diameter;
5/8–11 metal insert
3M Low
Profile
Disc Pad
Hub
051141-28476-7
3M Disc Pad Face Plates
(all sizes, tool shaft
length 1/2" or less)
2-1/2" Diameter;
5/8–11 metal insert N/A
3M Disc Pad Face Plates 051144-13325-3
10 Fibre Discs
4-1/2" Diameter; Smooth;
Medium – Gray
13,300051144-14270-5 4-1/2" Diameter; Smooth;
Hard – Black
051141-28443-9 4-1/2" Diameter; Ribbed;
Extra Hard – Red
051144-81734-4 5" Diameter; Ribbed;
Medium – Gray
12,000051144-81733-7 5" Diameter; Ribbed;
Hard – Black
051144-81732-0 5" Diameter; Ribbed;
Extra Hard – Red
051144-80516-7 7" Diameter; Ribbed;
Medium – Gray
8,600051144-80515-0 7" Diameter; Ribbed;
Hard – Black
051144-80514-3 7" Diameter; Ribbed;
Extra Hard – Red
3M Fibre Disc Backup Pad
and Retainer Nut
051141-28530-6 1 4" Fibre Discs with
5/8" Center Hole 4" Diameter; 3/8–24 INT 15,000
3M TN Quick Change
Disc Backup Pad
051111-56573-5 5 4-1/2" TN Discs 4-1/2" x 5/8–11 INT 13,300
3M Disc Retainer Nuts 051111 -51047-6
10 3M Disc Pad Face Plates
and Disc Pad Hubs
5/16" Depth;
5/8–11 Thread
N/A
051144 -05622-4 3/8" Depth;
5/8–11 Thread
051144 -05621-7 1/2" Depth;
5/8–11 Thread
051144 -05620-0 5/8" Depth;
5/8–11 Thread
3M Disc Holder Adapter
No. 9 048011-22971-3
10
Converts grinders with
M10–1.25, M10–1.5, or
3/8–24 external threaded
shaft to a 5/8–11
external threaded shaft
M10–1.25 INT
N/A048011-22972-0 M10–1.50 INT
048011-22970-6 3/8–24 INT
51696
12896
51694
51695
Accessories
352092
712406
† Also for use with Scotch-Brite Light Grinding and Blending Discs.
Accessories
49
Product Name UPC Qty./Case For Use With Size/Description Max RPM
3M Flap Discs/Bonded Wheels Accessories
Flap Disc/
Grinding Wheel
Adapter Nut 051144-88765-1 1 Pair/5 Pairs
Secures 4-1/2" diameter
flap discs or 4-1/2"
grinding wheels to right
angle tool with a
5/8–11 threaded shaft
5/8 –11 Thread Size N/A
Flap Disc
Holder
051144-88769-9 1
Backup plate for 7" diameter
flap discs or 8" diameter
type 27 grinding wheels
4" Diameter;
5/8–11 Thread Size N/A
3M Green Corps Flexible
Grinding Disc 051111-51046
5/100
Backup plate for 4-1/2" center
hole flexible grinding wheel
7/8" Center Hole Diameter;
3-3/8" Diameter; Clear
N/A
051111-51045 Backup plate for 7" center
hole flexible grinding wheel
7/8" Center Hole Diameter;
4-5/8" Diameter; Clear
3M Roloc Disc Accessories
3M Roloc TR Disc Pads 051144-45101-2
53M Roloc TR Discs
1" Diameter; Medium;
1/4–20 INT
30,000051144-45099-2 1-1/2" Diameter; Medium;
1/4–20 INT
051144-45100-5 1-1/2" Diameter; Hard;
1/4–20 INT
051144-45095-4 2" Diameter; Medium;
1/4–20 INT
25,000
051144-45096-1 2" Diameter; Hard;
1/4–20 INT
051144-45092-3 3" Diameter; Medium;
1/4–20 INT 18,000
051144-45091-6 3" Diameter; Hard;
1/4–20 INT 20,000
051144-45179-1 4" Diameter; Medium;
1/4–20 INT 12,000
051111-56479-0 4" Diameter; Cool Running;
3/8–24 INT 15,000
051141-28474-3 4" Diameter; Hard;
3/8–24 INT
12,000
051141-28475-0 4" Diameter; Extra Hard;
3/8–24 INT
051141-28473-6 4" Diameter; Cool Running;
5/8–11 INT 15,000
051144-83242-2 4" Diameter; Medium;
5/8–11 INT
12,000051144-83489-1 4" Diameter; Hard;
5/8–11 INT
051144-83980-3 4" Diameter; Extra Hard;
5/8–11 INT
Accessories
78458
12923
215540
158149
158318
4" Diameter;
Cool Running
Product Name UPC Qty./Case For Use With Size/Description Max RPM
3M Roloc Disc Accessories (cont.)
3M Roloc TS
or TSM Disc Pads 051144-77729-7
53M Roloc TSM Discs and
“screw on” abrasive discs
1-1/2"; Medium
30,000
051144-77728-0 1-1/2"; Hard
051144-14211-8 2"; Medium
25,000
051144-14212-5 2"; Hard
051144-14215-6 3"; Medium 18,000
051144-14216-3 3"; Hard 20,000
3M Roloc Cool
Running Disc Pads 051111-56479-0
53M Roloc TR Discs
4"; 3/8–24 INT
051141-28473-6 4"; 5/8–11 INT
3M Roloc TP Disc Pads 051144-14201-9
53M Roloc TP Discs
3"; Medium; 1/4–20 INT 18,000
051144-14202-6 3"; Hard; 1/4–20 INT 20,000
1/4" Threaded Shaft
051144-45102-9 10/50 Used on 3M Roloc Disc
Pads with 1/4–20 INT 1/4" x 1/4–20 Thread N/A
3M Roloc + Holder
048011-15408-4 5
3M Roloc Unitized Wheels,
Roloc+ Products, Brush
and Disc Accessories
1" Diameter x
1/4" Shaft Diameter 25,000
Scotch-Brite Light Grinding and Blending Disc Accessories
3M Disc Pad Face Plates* 051144-14270-5
10 Light Grinding
and Blending Discs
4-1/2" Diameter; Smooth;
Hard – Black 13,300
051141-28443-9 4-1/2" Diameter; Ribbed;
Extra Hard – Red
051144-81733-7 5" Diameter; Ribbed;
Hard – Black 12,000
051144-81732-0 5" Diameter; Ribbed;
Extra Hard – Red
051144-80515-0 7" Diameter; Ribbed;
Hard – Black 8,600
051144-80514-3 7" Diameter; Ribbed;
Extra Hard – Red
3M Hook-and-Loop Disc
Pad Holder
051141-20245-7 1
Scotch-Brite Light
Grinding and Blending
Disc Accessories
7" x 7/8" Center Post;
5/8–11 INT 8,500
Accessories
Accessories
50
12870
221758
51732
158006
51695
* Must be used with 3M Disc Pad Hubs. See page 48.
733191
Accessories
51
†† Also for use with Unitized Wheels.
Accessories
Product Name UPC Qty./Case For Use With Size/Description Max RPM
Scotch-Brite Disc Accessories
3M Hook-and-Loop
Disc Pad Holders 048011-07494-8
10
Scotch-Brite Surface
Conditioning Discs
2" (1/4" shank);
Catalog No. 922 23,000
048011-04132-2 3" (1/4" shank);
Catalog No. 923 20,000
048011-07492-4 5 4" (1/4" shank);
Catalog No. 924
13,000
048011-05674-6
1
4" x 1/8" x 3/8" 5/8–11 INT;
Catalog No. 914
048011-14111-4 4-1/2" x 5/8–11 INT;
Catalog No. 9145
048011-05680-7 5" x 5/8–11 INT;
Catalog No. 915
048011-09448-9 5" x 5/16–24 EXT;
Catalog No. 905 10,000
048011-09450-2 7" x 5/8–11 INT;
Catalog No. 917
6,000051141-20279-2 7" x 1" x 5/8–11 INT;
Catalog No. 947TH
048011-09451-9 8" x 5/16" x 3/8" 5/8–11 INT;
Catalog No. 918
3M TN Quick Change
Disc Backup Pad
051111-56573-5 5 4-1/2" TN Discs 4-1/2" x 5/8–11 INT 13,300
Mandrels††
048011-13968-5 5
Furnished complete with
washers to fit available
wheel and disc sizes††
Catalog No. 933;
2" x 1/4" x 1" 14,000
048011-04021-9 1 Catalog No. 934;
3-1/16" x 1/4" x 2-1/2" 12,000
352092
Disc Pad Holder
No. 905
51713
Disc Pad
Holder No.
947TH
636899
95288
Disc Pad Holder
No. 918
Disc Pad Holder
No. 924
369359
Disc Pad
Holder
No. 914
614622
Disc Pad Holder
No. 917
14469
Disc Pad Holder
No. 922 and 923
14470
Disc Pad
Holder
No. 9145
and 915
215543
12864
Disc
Mandrel
No. 933 or 934
51720
Mandrel No. 934
1/2" Shaft Dia.
Mandrel No. 933
1/4" Shaft Dia.
14360
Accessories
Product Name UPC Qty./Case For Use With Size/Description Max RPM Max OPM
Scotch-Brite Disc Accessories (cont.)
3M Wheel Adapter Kits
051141-28419-4 1
3M Inline Sanders;
4", 6" 8"
Scotch-Brite Surface
Conditioning Discs;
Wheels with 1/2"–1"
center holes
Part No. 28419;
1/2–20 EXT
See MOS
of abrasive
disc or
wheel
N/A
051144-45038-1 1 Part No. 45038;
5/8–11 EXT N/A
3M Spindle Extender Kit
048011-04019-6 1 Part No. 300 N/A
3M Hookit Disc Accessories
3M Hookit Disc Pad 051131-05755-5
10 Scotch-Brite Coating
Removal Discs
5" x 3/8" x 5/16–24 EXT 12,000 12,000
051144-85096-9 5" x 5/8" x 5/8–11 INT 12,000 N/A
051144-13625-4 5" x 3/4" x 5/16–24 EXT 10,000 12,000
051144-85105-8 5 x 3/4" x 5/8–11 INT 12,000 N/A
051144-13627-8 1 7" x 1" x 5/8–11 INT 6,000 N/A
3M Stikit Disc Accessories
3M Stikit Disc Pads 051131-05545-2
10
3M Stikit Discs
5" x 11/16" 5/16–24 EXT;
Low Profile Finishing 12,000 12,000
051131-05546-9 6" x 11/16" 5/16–24 EXT;
Low Profile Finishing 10,000 12,000
051131-05555-1 5" x 3/8" 5/16–24 EXT;
Low Profile 12,000 12,000
051131-05556-8 6" x 3/8" x 5/16–24 EXT;
Low Profile 10,000 12,000
051144-05575-3
1/10
5" x 3/4" x 5/16–24
10,000 12,000
051144-05576-0 6" x 3/4" x 5/16–24
051144-05579-1 1 8" x 5/8–11 INT 3,000 N/A
051111-55813-3 5 5" x 1/2" 5/8–11 INT 12,000 N/A
051141-20351-5
10
5" x 3/8" x 5/16–24 EXT;
Red Foam; Low Profile 12,000 12,000
051141-20354-6 6" x 3/8" x 5/16–24 EXT;
Red Foam; Low Profile 12,000 12,000
051144-81821-1
10
5" x 3/4" 5/16–24 EXT 10,000 12,000
051144-82189-1 5" x 3/4" 5/8–11 INT 12,000 N/A
051144-88736-1 5" x 3/8" 5/16–24 EXT 10,000 12,000
51708
100480
Accessories
52
Accessories
53
51710
Product Name UPC Qty./Case For Use With Size/Description Max RPM
3M PSA Disc Accessories
PSA Disc Holder 051144-45070-1
10 Any air or electric grinding
tool that
accommodates a
1/4" shank; Supports
248D/348D PSA disc
2" Diameter 15,000
051144-05510-4 3" Diameter 10,000
051144-45068-8 5 5" Diameter 6,000
Unitized Wheel Accessories
Mandrels 048011-04018-9
5Scotch-Brite
Unitized Wheels
Mandrel No. 936 ;
2-1/16" x 1/4" x 3/4" 22,200
048011-15012-3 Mandrel No. 990 with 3” wheel;
1-3/4" x 1/4" x 1" 18,200
Convolute Wheel Accessories
Flange Adapter Kit No. 5 048011-16859-3
1 Set
6" Wheels; Telescoping
wheel adapters 1" and 1/2"
wide to reduce 1" wheel
cores to fit 1/2", 5/8", 3/4",
or 7/8" shafts; Must be
used with side flanges
1" x 1/2" x 1/2"
N/A
048011-16860-9 1" x 1" x 1/2"
Flap Wheel Accessories
Wheel Adapter Kit No. 3 051144-45035-0
1
Two arbor hole (plug type)
adapters for 6" and 8"
diameter flap wheels
1" OD x 1/2" ID
N/A
051144-45034-3 1" OD x 5/8" ID
051144-45033-6 1" OD x 3/4" ID
051144-45032-9 1" OD x 7/8" ID
Wheel Adapter Kit No. 81A
051144-45081-7 1 For T84 Flap Wheels 1/4" x 1/4–20 INT N/A
Star Accessories
Mandrel
No. 944
048011-13928-9 1
Scotch-Brite Stars for
cleaning and polishing internal
diameters of pipe and tubing
1/4" x 1/4–20 EXT 25,100
Cross Buff Accessories
3M Mandrel
048011-14307-8 1
Scotch-Brite Cross Buffs for
cleaning and polishing internal
diameters of pipe and tubing
1/4" x 8– 32 EXT
Dependent
upon abrasive
product used
Cartridge Roll Accessories
3M Mandrels 051144-45119-7
25 Screw-type mandrels for
securing cartridge rolls to tool
1/8" x 1" x 1/4" 24,000 (1/2"
and smaller
cartridge roll
diameter);
16,000 (5/8"–
3/4" cartridge
roll diameter)
051144-45117-3 3/16" x 1" x 1/4"
051144-45118-0 3/16" x 1-1/2" x 1/4"
Accessories
51733
Mandrel
No. 936 51734
Mandrel
No. 990
51738
158019
51755
85398
158320
157990
Product Name UPC Qty./Case For Use With Size/Description Max RPM
Cross and Square Pad Accessories
3M Square and
Cross Pad Mandrel 051144-14308-5
1Used for holding square and
cross pads with 1/4–20 and
8 32 internal threaded inserts
1/4" x 1/4–20 EXT
Dependent
upon abrasive
product used
051144-14307-8 1/4" x 832 EXT
051141-28385-2 5 1/4" x 348 EXT
Band and Belt Accessories
Rubber Slotted
Expander Wheels 051144-77717-4
1Slotted wheels for
use with bands
1" x 1" x 1/4" 18,000
051144-77718-1 1-1/2" x 1" x 1/4" 14,000
051144-77720-4 2" x 1" x 1/4" 12,000
051144-77721-1 2" x 2" x 1/4"
6,000
051144-77722-8 3" x 3" x 5/8–INT
051141-28348-7 5" x 3-1/2" 5/8" Arbor Hole
3,500
051141-28349-4 3-1/4" x 3" 5/8" Arbor Hole
Rubber Cushion
Polishing Wheels 051144-45159-3
1Use with bands when
creating fine finishes
1/4" x 1/2" x 1/8" 23,000
051144-45156-2 1/2" x 1/2" x 1/4" 30,000
051144-45153-1 1/2" x 1" x 1/4"
15,000
051144-45152-4 1/2" x 1-1/2" x 1/4"
051144-45145-6 3/4" x 1" x 1/4" 17,000
051144-45144-9 3/4" x 1-1/2" x 1/4" 10,000
051144-45139-5 1" x 1" x 1/4" 18,000
051144-45138-8 1" x 1-1/2" x 1/4" 10,000
051144-45132-6 1-1/2" x 1" x 1/4" 14,000
051144-45131-9 1-1/2" x 1-1/2" x 1/4" 10,000
051144-45130-2 1-1/2" x 2" x 1/4" 8,000
051144-45129-6 2" x 1" x 1/4" 11,000
051144-45127-2 2" x 2" x 1/4" 6,000
051144-45124-1 3" x 3" x 3/8"
3,000
051144-45123-4 3" x 3" x 1/2"
Accessories
51757
51758
591935
Accessories
54
Product Name UPC Qty./Case For Use With Size/Description Max RPM
Utility Cloth Sheet and Roll Accessories
Forked Spindle
051144-45121-0 10 For attaching utility cloth strips 1/4" x 3" N/A
Scotch-Brite Hand Pad Accessories
Scotch-Brite Pad Holder
No. 961
048011-09493-4 10
Scotch-Brite Hand Pads;
Provides increased
leverage and eliminates
“finger” marks
3-1/2" x 4-3/4" N/A
Scotch-Brite Roll Accessories
Mini Mandrel No. 935
048011-04020-2 5
Scotch-Brite Strips
to clean and polish
inner diameters and
other tight areas
2-7/8" x 1/4" 14,000
Accessories
51772
51766
14475
Accessories
55
Ind’l Mesh-ANSI FEPA “P” Micron (µ) Scotch-Brite Grade*
12
P12
P16
16
P20
20
P24
24
P30
30
36
P36
40
P40
50
P50
60
P60
P80
80 180
P100 150
100 Extra Coarse
P120 120
120 Coarse
100
P150
150 Medium
180 P180 80
220
P220
60
P240
240 Fine
P280
50
P320
280 40
P360
320 Very Fine
P400 35
P500 30
360
P600
400
P800 22
20
500
P1000 18
600 Super Fine
P1200
15
P1500
800 12
P2000 10
1000 Ultra Fine
9
P2500
1200
5 Microfine
1500 3
2000 1
Abrasive Grade Comparison Guide Scotch-Brite
Product Guide
Measurement Conversions:
1 inch = 25.4 millimeters
1 millimeter = 0.039370 inches
1 micron (µ) = 0.000039 inches
ANSI American National
Standards Institute
FEPA Federation of European Producers
of Abrasives Products
Density Number (prefix to mineral)
Mineral Abbreviations (prefix to grade)
AAluminum Oxide mineral
SSilicon Carbide mineral
T—Talc mineral
Grade Abbreviations
ULF Ultra Fine
SFN Super Fine
VFN Very Fine
FIN Fine
MEDMedium
CRSCoarse
XCSExtra Coarse
Example:
2S MED = Soft Density,
Silicon Carbide Mineral,
Medium Grade
2S MED
soft hard
Soft
Density
Silicon Carbide Mineral
Medium Grade
* Scotch-Brite Surface Conditioning Grade
(Generates finish approximately equivalent
to indicated coated abrasive grade.)
2 4 6 7 8 9 10 11
56
Abrasive Grade Reference Chart
Complete solutions.
Commitment to
Innovation and
Quality.
Complete solutions. It’s what you’ve come to expect from 3M, the leading supplier for welding industries.
For over 100 years, 3M has been a proven leader, providing advanced technology and innovative solutions
for increased productivity, enhanced efficiency and improved manufacturing processes.
This commitment to innovation continues with ongoing new product introductions focused on the
complete metalworking experience. Today, 3M Welding Products encompass a broad spectrum of
solution-specific products from personal safety to abrasives and high-strength adhesives. 3M presents
a growing portfolio with each addition to this line of advanced solutions designed for all metalworking
processes from start to finish.
for2011
What’s New
3M Cubitron II Fibre Discs 987C The coolest way to increase
productivity. If you work with heat-sensitive metals, like stainless steel,
and you value increased throughput and greater operator comfort,
try 3MCubitron II Fibre Discs 987C. These discs are made with
revolutionary 3M precision shaped ceramic grain technology, engineered
with ultra-sharp points that dig in and cut fast, run cool and last up to
3 times longer than conventional ceramic discs!
3M Cubitron II Fibre Discs 982C are made with revolutionary 3M
precision-shaped ceramic grain technology, engineered with ultra-sharp,
fast-cutting points that wear evenly, run cool and optimize mineral
breakdown to maximize disc life. 982C out performs comparable fibre
discs on life, cut and cost per grind, guaranteed. Finish more parts with
fewer discs regardless of grinding pressure.
3M AZ Belt 577F Because new 3M AZ Belts 577F last up to 20%
longer than competitive belts, you can grind more parts for about the
same price you’re now paying for abrasives. Its new and improved
premium mineral resin system, tough durable backing, and waterproof
grinding aid offers a big bang for your buck. Their outstanding balance
of high performance and affordability make 3M AZ Belts 577F an ideal
alternative for many day-to-day grinding operations.
3M Flap Disc 546D is a versatile product that delivers a fast cut, long
life, and a smooth finish. Performance and price make these discs a great
value and the flap design allows one disc to perform both the grinding
and blending steps. Plus, the economic alumina zirconia mineral is ideal
for lowering abrasive costs on both mild and stainless steel applications.
3M Green Corps Type 28 Depressed Center Wheel is constructed
of 3M Ceramic abrasive grain to provide fast cut, long life and high stock
removal. Its dish shape is perfect for grinding at lower angles of 15° to 25°
and is great for hard to reach areas.
3M Flap Disc 577F When finish is important, and you value the
extra cutting power of alumina zirconia over aluminum oxide, and the
versatility to work on all types of metals, choose 3M Flap Disc 577F.
This durable polyester-backed product provides longer life in high
pressure applications, and allows you to combine grinding and blending
in one step. Tough enough to tackle sharp edge work and beveling. For
those really big jobs, try the 3M Giant Flap Disc 577F with 25% more
thickness for aggressive cut and durability.
1
2
3
4
5
6
4
1 2
3
5 6
Prices subject to change without notice.
Important Notice to Purchaser
Safety Information: Always read and follow all safety information included with the product. Do not exceed maximum operating RPM’s. Use guards
provided with machine. Follow safety operation procedures posted in work areas.
Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that
3M believes are reliable. However, many factors beyond 3M’s control can effect the use and performance of a 3M product in a particular application,
including the conditions under which the product is used and the time and environments conditions in which the product is expected to perform. Since
these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for
a particular purpose and suitable for the user’s method of application.
Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M
warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different
warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit
for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s
and seller’s sole obligation will be at 3M’s option, to replace the product or refund the purchase price.
Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether
direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
THREE EASY WAYS TO CONTACT US FOR ALL 3M INDUSTRIAL PRODUCTS:
3M can provide additional products and accessories to meet your needs. Please contact us in any of the following ways that
you prefer:
Contact your local 3M authorized distributor directly. For information on a 3M distributor or sales representative in your
area, contact us at the numbers below:
For the contiguous 48 United States:
Call .............. 1-866-279-1288
Fax .............. 1-877-369-2923
E-mail us at 3MIndustrial@mmm.com
Abrasive Systems Division
3M Center, Building 223-6S-03
St. Paul, MN 55144-1000
1-866-279-1235
www.3M.com/abrasives
3M Industrial Products
Abrasives and Power Tools for Welders
3M, Cool Flow, Classic, Cubitron, CUNO, DX, E-A-R, E-A-Rsoft, EARflex, EARform, EPX, Green Corps, Hookit, Lexa,
Neons, One Touch, Optime, Peltor, Push-Ins, Roloc, Safety-Walk, Scotch, Scotch-Brite, Scotch-Seal, Scotch-Weld,
Scotchblok, Scotchpar, Scotchpro, Speedglas, Stikit, Super 77, Tartan, Trizact, UltraFit, VHB, Virtua, Wetordry,
X.Sport and Yellow Neon are all trademarks of 3M.
Please Recycle. Printed in U.S.A. © 3M 2011. All rights reserved. 61-5002-828 - Bolger 11080470
Solutions
Welding
For additional 3M product information call 1-800-3M Helps or visit us at www.3M.com
1
2
3
4 5