CD214A Transient Voltage Suppressor Diode Series
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Features
Lead free
RoHS compliant*
Surface Mount SMA package
Standoff Voltage: 5.0 to 170 volts
Power Dissipation: 400 watts
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly
smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA)
size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown
Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices
from 0 V to Minimum Breakdown Voltage.
Bourns®Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Parameter Symbol Value Unit
Minimum Peak Pulse Power Dissipation (TP= 1 ms) (Note 1,2) PPK 400 Watts
Peak Forward Surge Current
8.3ms Single Half Sine Wave Superimposed on Rated Load IFSM 40 Amps
(JEDEC Method) (Note 3)
Steady State Power Dissipation @ TL= 75 °C PM(AV) 1.0 Watts
Maximum Instantaneous Forward Voltage @ IPP = 35 A VF3.5 Volts
(For Unidirectional Units Only)
Operating Temperature Range TJ-55 to +150 °C
Storage Temperature Range TSTG -55 to +175 °C
Electrical Characteristics (@ TA= 25 °C Unless Otherwise Noted)
How To Order
CD 214A - T 5.0 CA LF
Common Code
Chip Diode
Package
214A = SMA/DO-214AC
214B = SMB/DO-214AA
214C = SMC/DO-214AB
Model
T = Transient Voltage Suppressor Series
Working Peak Reverse Voltage
5.0 = 5.0 VRWM (Volts)
170 = 170 VRWM (Volts)
Suffix
A = 5 % Tolerance Device
CA = 5 % Tolerance Bidirectional Device
Terminations
LF = 100 % Sn (lead free)
Asia-Pacific:
Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116
Europe:
Tel: +41-41 768 5555 • Fax: +41-41 768 5510
The Americas:
Tel: +1-951 781-5500 • Fax: +1-951 781-5700
www.bourns.com
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.
*RoHS COMPLIANT
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Model CD214A is currently available,
although not recommended for new
designs. Model SMAJ is preferred.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CD214A Transient Voltage Suppressor Diode Series
Electrical Characteristics (@TA= 25 °C unless otherwise noted)
Maximum Maximum Maximum
Unidirectional Device Bidirectional Device Working Peak Reverse Reverse Reverse
Breakdown Voltage Reverse Leakage Voltage Surge
Part Part Part Part VBR (Volts) Voltage @ VRWM @IRSM Current
Number Marking Number Marking Min. Max. @ IT(mA) VRWM (Volts) IR(uA) VRSM (Volts) IRSM (Amps)
CD214A-T5.0A HE CD214A-T5.0CA TE 6.40 7.00 10 5.0 800 / 1600 9.2 43.5
CD214A-T6.0A HG CD214A-T6.0CA TG 6.67 7.37 10 6.0 800 / 1600 10.3 38.8
CD214A-T6.5A HK CD214A-T6.5CA TK 7.22 7.98 10 6.5 500 / 1000 11.2 35.7
CD214A-T7.0A HM CD214A-T7.0CA TM 7.78 8.60 10 7.0 200 / 400 12.0 33.3
CD214A-T7.5A HP CD214A-T7.5CA TP 8.33 9.21 1.0 7.5 100 / 200 12.9 31.0
CD214A-T8.0A HR CD214A-T8.0CA TR 8.89 9.83 1.0 8.0 50 / 100 13.6 29.4
CD214A-T8.5A HT CD214A-T8.5CA TT 9.44 10.4 1.0 8.5 10 / 20 14.4 27.7
CD214A-T9.0A HV CD214A-T9.0CA TV 10.0 11.1 1.0 9.0 5 / 10 15.4 26.0
CD214A-T10A HX CD214A-T10CA TX 11.1 12.3 1.0 10 5 / 10 17.0 23.5
CD214A-T11A HZ CD214A-T11CA TZ 12.2 13.2 1.0 11 5.0 18.2 22.0
CD214A-T12A IE CD214A-T12CA UE 13.3 14.7 1.0 12 5.0 19.9 20.1
CD214A-T13A IG CD214A-T13CA UG 14.4 15.9 1.0 13 5.0 21.5 18.6
CD214A-T14A IK CD214A-T14CA UK 15.6 17.2 1.0 14 5.0 23.2 17.2
CD214A-T15A IM CD214A-T15CA UM 16.7 18.5 1.0 15 5.0 24.4 16.4
CD214A-T16A IP CD214A-T16CA UP 17.8 19.7 1.0 16 5.0 26.0 15.3
CD214A-T17A IR CD214A-T17CA UR 18.9 20.9 1.0 17 5.0 27.6 14.5
CD214A-T18A IT CD214A-T18CA UT 20.0 22.1 1.0 18 5.0 29.2 13.7
CD214A-T20A IV CD214A-T20CA UV 22.2 24.5 1.0 20 5.0 32.4 12.3
CD214A-T22A IX CD214A-T22CA UX 24.4 26.9 1.0 22 5.0 35.5 11.2
CD214A-T24A IZ CD214A-T24CA UZ 26.7 29.5 1.0 24 5.0 38.9 10.3
CD214A-T26A JE CD214A-T26CA VE 28.9 31.9 1.0 26 5.0 42.1 9.5
CD214A-T28A JG CD214A-T28CA VG 31.1 34.4 1.0 28 5.0 45.4 8.8
CD214A-T30A JK CD214A-T30CA VK 33.3 36.8 1.0 30 5.0 48.4 8.3
CD214A-T33A JM CD214A-T33CA VM 36.7 40.6 1.0 33 5.0 53.3 7.5
CD214A-T36A JP CD214A-T36CA VP 40 44.2 1.0 36 5.0 58.1 6.9
CD214A-T40A JR CD214A-T40CA VR 44.4 49.1 1.0 40 5.0 64.5 6.2
CD214A-T43A JT CD214A-T43CA VT 47.8 52.8 1.0 43 5.0 69.4 5.7
CD214A-T45A JV CD214A-T45CA VV 50 55.3 1.0 45 5.0 72.7 5.5
CD214A-T48A JX CD214A-T48CA VX 53.3 58.9 1.0 48 5.0 77.4 5.2
CD214A-T51A JZ CD214A-T51CA VZ 56.7 62.7 1.0 51 5.0 82.4 4.9
CD214A-T54A RE CD214A-T54CA WE 60 66.3 1.0 54 5.0 87.1 4.6
CD214A-T58A RG CD214A-T58CA WG 64.4 71.2 1.0 58 5.0 93.6 4.3
CD214A-T60A RK CD214A-T60CA WK 66.7 73.7 1.0 60 5.0 96.8 4.1
CD214A-T64A RM CD214A-T64CA WM 71.1 78.6 1.0 64 5.0 103 3.9
CD214A-T70A RP CD214A-T70CA WP 77.8 86.0 1.0 70 5.0 113 3.5
CD214A-T75A RR CD214A-T75CA WR 83.3 92.1 1.0 75 5.0 121 3.3
CD214A-T78A RT CD214A-T78CA WT 86.7 95.8 1.0 78 5.0 126 3.2
CD214A-T85A RV CD214A-T85CA WV 94.4 104 1.0 85 5.0 137 2.9
CD214A-T90A RX CD214A-T90CA WX 100 111 1.0 90 5.0 146 2.7
CD214A-T100A RZ CD214A-T100CA WZ 111 123 1.0 100 5.0 162 2.5
CD214A-T110A SE CD214A-T110CA XE 122 135 1.0 110 5.0 177 2.3
CD214A-T120A SG CD214A-T120CA XG 133 147 1.0 120 5.0 193 2.0
CD214A-T130A SK CD214A-T130CA XK 144 159 1.0 130 5.0 209 1.9
CD214A-T150A SM CD214A-T150CA XM 167 185 1.0 150 5.0 243 1.6
CD214A-T160A SP CD214A-T160CA XP 178 197 1.0 160 5.0 259 1.5
CD214A-T170A SR CD214A-T170CA XR 189 209 1.0 170 5.0 275 1.4
Notes:
1. Suffix ‘A’ denotes a 5 % tolerance device. 3. For bidirectional devices with a VRof 10 volts or less, the IRlimit is double.
2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 4. For unidirectional devices with a VFmax. of 3.5 V at an IFof 35 A, 0.5 Sine Wave
of 8.3 ms Pulse Width.
Compliance
IEC 61000-4-2 ESD (Min. Level 4)
IEC 61000-4-4 EFT
IEC 61000-4-5 Surge
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CD214A Transient Voltage Suppressor Diode Series
Product Dimensions Recommended Pad Layout
Physical Specifications
Case ............................................Molded plastic per UL Class 94V-0
Polarity........................Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
Weight ....................................................0.002 ounces / 0.064 grams
Dimension SMA (DO-214AC)
A4.06 - 4.57
(0.160 - 0.180)
B2.29 - 2.92
(0.090 - 0.115)
C1.27 - 1.63
(0.050 - 0.064)
D0.15 - 0.31
(0.006 - 0.112)
E4.83 - 5.59
(0.190 - 0.220)
F0.05 - 0.20
(0.002 - 0.008)
G2.01 - 2.62
(0.080 - 0.103)
H0.76 - 1.52
(0.030 - 0.060)
B
G
F D
C
H
E
AA
C
B
MM
(INCHES)
DIMENSIONS:
Dimension SMA (DO-214AC)
A (Max.) 2.70
(0.106)
B (Min.) 2.10
(0.083)
C (Min.) 1.27
(0.050)
MM
(INCHES)
DIMENSIONS:
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CD214A Transient Voltage Suppressor Diode Series
Rating and Characteristic Curves
Pulse Derating Curve Maximum Non-Repetitive Surge Current
100
75
50
25
0
050
25 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
Peak Forward Surge Current (Amps)
60
40
50
30
20
10
0
12 5 10 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
Pulse Waveform Typical Junction Capacitance
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Capacitance (pF)
10000
100
0
010 100 1000
Standoff Voltage (Volts)
1000
Bidirectional
TA = 25 °C
Unidirectional
Pulse Rating Curve Steady State Power Derating Curve
100
10
1.0
0.1
0.1 µs 1.0 µs 10 µs 10 ms
TP, Pulse Width
PP, Peak Power (KW)
100 µs 1.0 ms
5.0 mm Lead Areas
TA = 25 °C
Non-repetitive
Pulse Waveform
Shown in Pulse Waveform Graph
1.0
0.6
0.8
0.4
0.2
0.0
050
25 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CD214A Transient Voltage Suppressor Diode Series
Packaging Information
REV. 03/10
The product will be dispensed in Tape and Reel format (see diagram below).
.......
.......
....... ..............
....... ..............
P A
F
ET
120 °
D2
DD
1
W1
C
Index Hole
P
0
P
1
W
B
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
Trailer Device Leader
Start
d
Devices are packed in accordance with EIA standard
RS-481-A and specifications shown here.
MM
(INCHES)
DIMENSIONS:
Item Symbol SMA (DO-214AC)
Carrier Width A 2.90 ± 0.10
(0.114 - 0.004)
Carrier Length B 5.59 ± 0.10
(0.220 - 0.004)
Carrier Depth C 2.36 ± 0.10
(0.093 - 0.004)
Sprocket Hole d 1.55 ± 0.05
(0.061 - 0.002)
Reel Outside Diameter D 330
(12.992)
Reel Inner Diameter D150.0 MIN.
(1.969)
Feed Hole Diameter D213.0 ± 0.20
(0.512 - 0.008)
Sprocket Hole Position E 1.75 ± 0.10
(0.069 - 0.004))
Punch Hole Position F 5.50 ± 0.05
(0.217 - 0.002)
Punch Hole Pitch P 4.00 ± 0.10
(0.157 - 0.004)
Sprocket Hole Pitch P04.00 ± 0.10
(0.157 - 0.004)
Embossment Center P12.00 ± 0.05
(0.079 - 0.002)
Overall Tape Thickness T 0.30 ± 0.10
(0.012 - 0.004)
Tape Width W 12.00 ± 0.20
(0.472 - 0.008)
Reel Width W118.4 MAX.
(0.724)
Quantity per Reel -- 5,000