EAM series
Small, Low leakage current type (1-Stage filter)
EAM -10 -000 -O
Ordering information
*
The dimensions change when the option is set.
Refer to External view.
1 2 3 4
Features of EAM series
Circuit Diagram Derating Curve
LINE
Case
: Mounting Plate
1
24
3
CY
CY
CY : Line to ground capacitor
LOAD
Small, Low leakage current type(1-Stage filter)
- Single Phase 250 VAC -Small-size
-Quick and easy push-down terminal
Just connect the wires,push-down and tighten
the screws with a screwdriver
Ambient Temperature [C]
Load Factor [%]
9050 60 70 80
20
0
-4040-30-20
100
80
60
40
55
Specifications
No. Items EAM-03-000 EAM-06-000 EAM-10-000 EAM-16-000 EAM-20-000 EAM-30-000
1Rated Voltage[V] AC 1f 250 / DC250
2 Rated Current[A] 3 6 10 16 20 30
3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity
4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 500MW min at room temperature and humidity
5 Leakage current 125/250V 60Hz 5A/10 A max
6 DC resistance 180mW max 110mW max 40mW max 20mW max 10mW max 6mW max
7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve)
8 Operating temperature -40 to +85C (Refer to Derating Curve)
9 Operating humidity 20 to 95%RH (Non condensing)
10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing)
11 Vibration 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis
12 Impact 196.1m/s2 (20G), 11ms Once each X, Y and Z axis
13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input)
14 Case size (without projection) /Weight
39X30X85 mm [1.54X1.18X3.35 inches] (WXHXD) /170g max (Option : -D refer to external view)
DIN rail installation type is optionThe terminal cover is retracted inside the unit
1 Model Name
2 Rated Current
3 Line to ground capacitor code:See table 1.1.
table1.1 Line to ground capacitor code
Code Leakage Current
(Input 125/250V 60Hz)
Line to ground
capacitor
(nominal value)
000 5 A/ 10 A max Not Provided
101 12.5 A/ 25 A max 100pF
221 25 A/ 50 A max 220pF
331 37.5 A/ 75 A max 330pF
471
50 A/
100 A max 470pF
* When the line to ground capacitor code is
different, the attenuation characteristic is
different.
4 Options
D
:DIN rail installation type
R
EA/ES-2
EAC,EAM,EAP series
Mounting Plate
¶ Closed the terminal cover
Terminal cover M4
M4
2-M4
2-M4
2-f4.8
Mounting Hole
Protection Earth
Name Plate
Terminal cover
Terminal cover
Protection Earth
85
[3.35]
[2.95]
[2.83]
[0.19]
75 ±0.5
72
39
31.5 ±0.5
12.7
[0.5]
[1.24]
[1.54]
11.5
21
2.5
[0.1][0.83]
[0.45]
9.7
[0.38]
30 2
[1.18] [0.08]
Terminal
Input
Terminal
Output
¶ Tolerance : ±1 [±0.04]
¶ Weight : 170g max
¶ Mounting Plate : Iron (surface finishing:nickel plating)㹲=1.0 [0.04]
¶ Case㸸PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tightening torque M4㸸1.6N࣭m(16.9kgf࣭cm)max
This product is shipped in the following condition,because it is equipped with push-down terminals.
1The terminal cover is retracted inside the unit.
2The screws for connecting the terminals are held in the up right position.
¡Note when installing the EMI/EMC
Filter on a DIN rail.
When the EMI/EMC Filter is grounded through
the DIN rail, the proper noise attenuation may not
be achieved.
Be sure to connect the protection earth (PE) of
the EMI/EMC Filter body to the earth.
It can connect the ground to either one only.
¶ Closed the terminal cover
Mounting Plate
M4
M4
2-M4
2-M4
Protection Earth
Terminal cover
Terminal cover
Protection Earth
Terminal cover
DIN rail
Name Plate
8.5 +2
-1
85
[3.35] [0.33]
[0.1][0.83]
[0.45]
[2.83]
72
39
[1.54]
[0.5]
[1.18] [0.08]
[0.28]
[0.35] [0.38]
30 212.7
9.7
11.5
21
2.5
7
(9)
Terminal
Input
Terminal
Output
¶ Tolerance : ±1 [±0.04]
¶ Weight : 170g max
¶ Mounting Plate : Iron (surface finishing:nickel plating)㹲=1.0 [0.04]
¶ Case㸸PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tightening torque M4㸸1.6N࣭m(16.9kgf࣭cm)max
Standard Type
DIN rail installation Type
Name Plate
DIN rail
External view
EA/ES-4
