F-219 TOLC-120-12-F-Q-LC TOLC-120-02-L-Q-LC TOLC-140-02-F-Q-A (1.27 mm) .050" TOLC SERIES QUAD ROW SMT TERMINAL Mates with: SOLC SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?TOLC (1.27 mm) .050" (1.27 mm) .050" Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au over 50 " (1.27 m) Ni Current Rating: 2.4 A per pin (6 adjacent pins powered) Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (05-30) (0.15 mm) .006" max (35-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) 1 TOLC RECOGNITIONS NO. PINS PER ROW For complete scope of recognitions see www.samtec.com/quality 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 FILE NO. E111594 OTHER SOLUTIONS (Standard sizes) Specify LEAD STYLE from chart = Gold flash on post, Gold flash on tail Q -A = Alignment Pin (Not available with -LC) -L -LC = Locking Clip (Not available with -A) (Manual placement required) -K (6.86) .270 (1.27) .050 D1C1 TYP (0.25) .010 (5.08) .200 A MATED HEIGHT - 02 (5.59) .220 (6.35) .250 -12 (7.24) .285 (8.00) .315 -22 (9.25) .364 (10.00) .394 -32 (11.23) .442 (12.00) .472 (2.54) .100 -TR (0.76) .030 A Style -02 LEAD STYLE = (9.00 mm) .354" DIA Polyimide film Pick & Place Pad (8.13) .320 (0.38) .015 (0.635) .025 TYP (2.54) .100 OPTION -F No. of positions x (1.27) .050 + (2.54) .100 ALSO AVAILABLE Note: Some sizes, styles and options are non-standard, non-returnable. PLATING OPTION No. of positions x (1.27) .050 + (0.76) .030 A1 B1 * Other sizes * Other platings LEAD STYLE = 10 " (0.25 m) Gold on post, Gold flash on tail * For Micro Rugged, see the MOLC/FOLC pages located in the Tiger EyeTM section. (MOQ Required) Drop-in replacement for FOLC/MOLC when mated with SOLC Surface mount = Tape & Reel (0.89) .035 (1.27) .050 -A OPTION Styles -12,-22,-32 (1.02) .040 (1.42) .056 -LC OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.