Series 35-1 PCB Tainer SERIES 35-1 PCB TAINER WEIGHT .37g/cm (.033 oz/in) MATERIALS AND FINISH HOUSING Material: .008-in. (.20-mm) thick Beryllium Copper per ASTM B-194 or Stainless Steel per ASTM A-366 Finish: See finish table on opposite page nVent.com/SCHROFF 1-800-854-7086 SERIES 35-1 PCB TAINER MATERIALS TABLE B BH CR DIMENSION TABLE BOARD THICKNESS DASH # A B -1 -2 -3 -4 0.79 (.031) 1.59 (.063) 2.38 (.094) 3.18 (.125) 4.58 (.180) 4.58 (.180) 4.58 (.180) 4.58 (.180) C MAX 8.39 (.330) 8.39 (.330) 8.39 (.330) 9.40 (.370) 9.15 (.360) 9.15 (.360) 9.15 (.360) 10.16 (.400) D E 7.57 (.298) 7.57 (.298) 7.57 (.298) 8.39 (.330) 3.97 (.156) 3.97 (.156) 3.97 (.156) 3.97 (.156) FINISH TABLE DASH # -1 -2 -3 -4 -5 -6 -7 -8 NONE Center Mounting Hole: __________________ None: _____________________________ Flared Entry: _______________________________ None: ________________________________ Material ___________________________ Board Thickness 59 _____________________ 2 Length in ( ) increments __________________ 4 [ _________________________________________ to 12 [ Special Length ______________________________ 15 [ Finish ( ( ( )] )] )] ________________________________________________ 5 No dash number required for CR material. Stainless steel parts are passivated only. nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.