Series 35-1 PCB Tainer
nVent.com/SCHROFF 1-800-854-7086
SERIES 35-1 PCB TAINER
WEIGHT
.37g/cm (.033 oz/in)
MATERIALS AND FINISH
HOUSING
Material:
.008-in. (.20-mm) thick
Beryllium Copper per
ASTM B-194 or Stainless
Steel per ASTM A-366
Finish:
See nish table on
opposite page
SERIES 35-1 PCB TAINER
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a
detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its aliates. All other trademarks
are the property of their respective owners. nVent reserves the right to change specications without notice.
Center Mounting Hole: __________________
None: _____________________________
Flared Entry: _______________________________
None: ________________________________
Length in ( ) increments __________________ 4 [ ( )]
_________________________________________ to 12 [ ( )]
Special Length ______________________________ 15 [ ( )]
No dash number required for CR material. Stainless steel parts are
passivated only.
Material
___________________________
Board Thickness
59 _____________________2
Finish
________________________________________________ 5
MATERIALS TABLE
B
BH
CR
FINISH TABLE
DASH #
NONE
-1
-2
-3
-4
-5
-6
-7
-8
DIMENSION TABLE
BOARD
THICKNESS
DASH # A B C MAX D E
-1 0.79 (.031) 4.58 (.180) 8.39 (.330) 9.15 (.360) 7.57 (.298) 3.97 (.156)
-2 1.59 (.063) 4.58 (.180) 8.39 (.330) 9.15 (.360) 7.57 (.298) 3.97 (.156)
-3 2.38 (.094) 4.58 (.180) 8.39 (.330) 9.15 (.360) 7.57 (.298) 3.97 (.156)
-4 3.18 (.125) 4.58 (.180) 9.40 (.370) 10.16 (.400) 8.39 (.330) 3.97 (.156)