F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 1 of 7
Features Functional Block Diagram
46.5 dBm OIP3 @ 5.8 GHz
15.5 dB Gain @ 2 GHz
10.0 dB Gain @ 6 GHz
30.0 dBm P1dB
SOT-89 Package
Device Voltage (Vcc)
Current (Icc)
Power Dissipation (PDC)
RF Input Power (RFin)
Junction Temperature
Thermal Resistance
Storage Temperature (Tstg)
Operating Temperature
ESD (HBM)
Moisture Sensitivity Level (MSL)
+9.0 V
450 mA
4.5W
+24 dBm
175 ºC
30 ºC/W
-55 ºC to +150 ºC
-40 ºC to +85 ºC
Class 1A
MSL 1
Absolute Maximum Ratings
Operation of this device beyond any of these parameters may cause
permanent damage.
Parameter Condition Min Typ MaxUnits
Frequency Range (F) DC 6000MHz
Test Frequency
13.5
1900MHz
Small Signal Gain (S21) Externally matched
Pout/Tone=13 dBm, Spacing=5 MHz
15.5dB
Output Intercept Point (OIP3) +44.0
+29.0
+46.5dBm
Output P1dB +30.0dBm
Quiescent Current (Icq) 300.0mA
Gate Voltage -1.2 -0.85 -0.5
330.0
V
Noise Figure (NF) 4.5dB
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Electrical Characteristics (T=25ºC, Vd=8V)
Frequency (F) 1900 5800 MHz
Gain (S21) 15.5 10.1 dB
Ourput IP3 (OIP3) 46.5 46.5 dBm
Output P1dB 30.0 30.0 dBm
Quiescent Current (Idq) 300 300 mA
Input Return Loss (S11) -12.5 -22.5 dB
Output Return Loss (S22) -7.5 -7.5 dB
Noise Figure (NF) 4.5 5.0 dB
P1dB at 5900 MHz can be improved to over 30 dBm at the expense of gain.
Typical Performance: 8V, 25 ºC
Parameter Typical Units
General Description
The XF1001-SC is a high linearity Hetrojunction Field Effect
Transistor (HFET) housed in an industry standard SOT-89
package. Optimum performance is achieved when the
device is biased at a drain voltage of 8V and drain current of
300m. At this bias point, the device is capable of more than
30 dBm of P1dB and OIP3 of more than 46 dBm. The
XF1001-SC is suitable for applications up to 6 GHz where it
has 10 dB of gain.
F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 2 of 7
Evaluation Board: EV1, 5.8 GHz
Schematic: EV1, 5.8 GHz
Vg = -0.85V Vd = 8V
RFIN RFOUT
Dielectric: Rogers 4003
Thickness: 12mil
F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 3 of 7
Typical Performance: 5.8 GHz
XF1001-SC, 8V 300mA
10
11
15
20
4
5
6
7
8
9
S (dB)
15
-10
-5
0
5
10
S21
S11
S22
2
3
4
5.5 5.55 5.6 5.65 5.7 5.75 5.8 5.85 5.9 5.95 6
Freq (GHz)
-25
-20
-
15
XF1001-SC, 8V 300mA
42
44
46
48
30
32
34
36
38
40
(dBm)
P1dB
OIP3
Psat
26
28
5.45 5.5 5.55 5.6 5.65 5.7 5.75 5.8 5.85 5.9 5.95 6 6.05
Freq (GHz)
F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 4 of 7
Typical Performance: 5.8 GHz (over temperature)
XF1001-SC, 8V, 300mA: Gain Vs Temperature
11
12
13
5
6
7
8
9
10
11
5 4
5 5
5 6
5 7
5 8
5 9
6
6 1
Gain (dB)
+25ºC
+85ºC
-40ºC
5
.
4
5
.
5
5
.
6
5
.
7
5
.
8
5
.
9
6
6
.
1
Frequency (GHz)
XF1001-SC, 8V, 300mA: P1dB Vs Temperature
30
31
32
25
26
27
28
29
5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
P1dB (dBm)
+25ºC
+85ºC
-40ºC
Frequency (GHz)
XF1001-SC, 8V, 300mA: OIP3 Vs Temperature
44
45
46
47
48
36
37
38
39
40
41
42
43
5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
P1dB (dBm)
+25ºC
+85ºC
-40ºC
Frequency (GHz)
F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 5 of 7
Typical Performance: 1.9 GHz
XF1001-SC, 8V 300mA
16
17
15
20
S21
S11
11
12
13
14
15
S (dB)
-10
-5
0
5
10
S22
9
10
1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2 2.05 2.1 2.15 2.2
Freq (GHz)
-20
-15
XF1001-SC, 8V 300mA
42
44
46
48
32
34
36
38
40
42
(dBm)
P1dB
OIP3
26
28
30
1.7 1.75 1.8 1.85 1.9 1.95 2 2.05 2.1
Freq (GHz)
F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 6 of 7
Physical Dimensions
Pin-out Details
App Note [1] Biasing - The XF1001-SC requires power supply sequencing. Negative voltage supply (Vgg) needs to be turned on first and then
positive voltage can be applied to the drain (Vdd). When turning off the device, the positive supply (Vdd) should be turned off first and then
negative voltage (Vgg) can be removed.
The gate voltage is adjusted in order to set the drain current to the desired level. The gate voltage required to achieve a certain current can vary
over temperature and from one device to another due to pinch-off voltage variation. Constant drain current can be achieved by Implementing an
active bias circuit which allows for temperature compensation and eliminates the effect of pinch off voltage variation.
Description Pin #
RF Input 1
RF Output 3
GND 2, 4
F1001-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
April 2010 - Rev 05-Apr-10
DC-6.0 GHz
1.0W Packaged HFET
Page 7 of 7
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering Description
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
XF1001-SC-0G00 Matte Tin plated RoHS compliant SOT-89 surface mount package in bulk quantity
XF1001-SC-0G0T Matte Tin plated RoHS compliant SOT-89 surface mount package in tape and reel
XF1001-SC-EV1 Evaluation Board @ 5800 MHz
