Part Number: MMBZ5221B thru MMBZ5259B PAGE 1
MMBZ5221B thru MMBZ5259B
SURFACE MOUNT SILICON ZENER DIODES
VOLTAGE 2.4 - 39 Volts 500 mW atts
FEATURES
Planar Die construction
500mW Power Dissipation
Zener Voltages from 2.4V - 39V
Ideally Suited for Automated Assembly Processes
MECHANICAL DATA
Case: SOT-23, Plastic
Terminals: Solderable per MIL-STD-202, Method 208
Approx. Weight: 0.008 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
PACKAGE SOT-23
POWER
NOTES:
A. Mounted on 5.0mm2(.013mm thick) land areas.
B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
retemaraP lobmyS eulaV stinU
57ta)AsetoN(noitapissiDrewoP
O
C
PD
005 Wm
flahelgnissm3.8,tnerruCegruSdrawroFkaeP
)BsetoN()dohtemCEDEJ(daoldetarnodesopmirepusevaw-enis
IFSM
0.4spmA
egnaRerutarepmeTegarotSdnanoitcnuJgnitarepO
TJ
051+ot55-
O
C
SINGLE
Part Number: MMBZ5221B thru MMBZ5259B PAGE 2
rebmuNtraP
egatloVreneZlanimoN ecnadepmIreneZ.xaM esreveRxaM
tnerruCegakaeL
.pmeTlacipyT
tneiciffeoC
reneZ.xaM
tnerruC
VZ@IZT ZZT @IZT ZZK @IZK IR@VRTCIZM T@a
V.moN V.niM V.xaM
Am
Am An V Am
sedoiDreneZsttaWm005
B1225ZBMM4.282.225.20302002152.00011 070.0-881
B2225ZBMM 5.2 83.2 36.2 03 02 0521 52.0 001 1 560.0- 081
B3225ZBMM7.275.248.20302003152.0571 060.0-761
B5225ZBMM 3 58.2 51.3 03 02 0061 52.0 05 1 550.0- 051
B6225ZBMM3.341.374.38202006152.0521 030.0831
B7225ZBMM 6.3 24.3 87.3 42 02 0071 52.0 51 1 030.0 621
B8225ZBMM9.317.31.43202009152.0011 830.0+511
B9225ZBMM 3.4 90.4 25.4 22 02 0002 52.0 5 1 830.0+ 601
B0325ZBMM7.474.449.49102009152.052 540.0+79
B1325ZBMM 1.5 58.4 63.5 71 02 0061 52.0 5 2 050.0+ 98
B2325ZBMM6.523.588.51102006152.053 850.0+18
B4325ZBMM 2.6 98.5 15.6 7 02 0001 52.0 5 4 260.0+ 37
B5325ZBMM8.664.641.750205752.035 560.0+76
B6325ZBMM 5.7 31.7 88.7 6 02 005 52.0 3 6 860.0+ 16
B7325ZBMM2.897.716.880200552.036 570.0+55
B9325ZBMM 1.9 56.8 65.9 01 02 006 52.0 3 5.6 670.0+ 05
B0425ZBMM015.95.01710200652.038 770.0+54
B1425ZBMM 11 54.01 55.11 22 02 006 52.0 3 4.8 970.0+ 14
B2425ZBMM214.116.21030200652.021.9280.0+83
B3425ZBMM 31 53.21 56.31 31 5.9 006 52.0 1 9.9 280.0+ 53
B5425ZBMM5152.4157.51615.800652.05.011380.0+03
B6425ZBMM 61 2.51 8.61 71 8.7 006 52.0 1.0 21 480.0+ 82
B8425ZBMM811.719.81127 00652.01.041580.0+52
B0525ZBMM 02 91 12 52 2.6 006 52.0 1.0 51 680.0+ 32
B1525ZBMM229.021.32926.500652.01.071680.0+12
B2525ZBMM 42 8.22 2.52 33 2.5 006 52.0 1.0 81 780.0+ 1.91
B4525ZBMM7256.5253.82145 00652.01.012780.0+8.61
B5525ZBMM 82 6.62 4.92 44 5.4 006 52.0 1.0 12 980.0+ 2.61
B6525ZBMM035.825.13942.400652.01.032090.0+1.51
B7525ZBMM 33 53.13 56.43 85 8.3 007 52.0 1.0 52 190.0+ 8.31
B8525ZBMM632.438.73074.300752.01.072190.0+6.21
B9525ZBMM 93 50.73 59.04 08 2.3 008 52.0 1.0 03 290.0+ 6.11
MMBZ5221B thru MMBZ5259B
ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) VF=1.2V max, IF=100mA for all types.
NOTE:
1.Tolerance and Type Number D esignation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%.
2.Specials Available Include:
A. Nominal zener voltages between the voltages shown and tighter voltage tolerances.
B. Matched sets.
3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body.
4.Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener
current (IZT or IZK) is superimposed on IZT or IZK.
5.Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine
wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5.
Part Number: MMBZ5221B thru MMBZ5259B PAGE 3
RATING and CHARACTERISTIC CURVES
TYPICAL REVERSE CURRENT
TEMPERATURE COEFFICIENT,mV / C)
o
NOMINAL ZENER VOLTAGE, Volts
-1
0
1
2
3
4
5
6
7
8
12111098765432
-2
-3
STEADY STATE POWER DERATING
EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE
100101
1000
100
10
1
IZ=1mA
5mA
20 mA
DYNAMIC IMPEDANCE, W
NORMAL ZENER VOLTAGE, Volts
T
J
=25 C
O
I
Z(AC)=0.1
I
F=1 kHZ
Z(DC)
FORWARD CURRENT,mA
TYPICAL FORWARD VOLTAGE
FORWARD VOLTAGE, Volts
1.21.11.00.90.80.70.60.50.4
1000
100
10
1
75 C
O
5C
O
25 C
O
150 C
O
TYPICAL CAPACITANCE
100
1000
100
10
1101
BIAS AT
50% OF VZNOM
0 V BIAS
1 V BIAS
CAPACITANCE, pF
NOMINAL ZENER VOLTAGE, Volts
T =25 C
A
o
100
10
1
NOMINAL ZENER VOLTAGE, Volts
TEMPERATURE COEFFICIENT,mV / C)
o
10 100
TEMPERATURE ( C)
o
POWER DISSIPATION, Watts
STEADY STATE POWER DERATING
1.2
1.0
0.8
0.6
0.4
0.2
0150125100755025
P
DV
.
S
.T
A
155
Part Number: MMBZ5221B thru MMBZ5259B PAGE 4
RATING and CHARACTERISTIC CURVES
ZENER VOLTAGE V.S. ZENER CURRENT
TYPICAL LEAKGE CURRENT
90
1000
100
10
1
0.1
0.01
0.001
0.0001
0.00001 80706050403020100
LEAKAGE CURRENT ( A)m
NOMINAL ZENER VOLTAGE, Vlots
+150 C
O
+25 C
O
-55 C
O
12
100
10
1
0.1
0.01 1086420
ZENER CURRENT,mA
ZENER VOLTAGE, Volts
T =25 C
A
o
100
10
1
0.1
0.01 10 30 50 70 90
T =25 C
A
o
ZENER VOLTAGE, Volts
ZENER VOLTAGE V.S. ZENER CURRENT
ZENER CURRENT,mA
Part Number: MMBZ5221B thru MMBZ5259B PAGE 5
OUTLINE DRAWING
© Copyright PanjIt International Inc. 2001
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may changed without notice. No liability will be
accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
PanJit Internatioal Inc.
TEL:886-7-6213121 Fax:886-7-6213129 Internet: http://www.panjit.com.tw email: sales@panjit.com.tw
.119(3.00)
.056(1.40)
.083(2.10)
.006(.15)
.047(1.20)
.110(2.80)
.066(1.70)
.035(.90)
.020(.50)
.013(.35)
.006(.15)MAX.
.103(2.60)
.086(2.20)
.044(1.10)
.002(.05)
.007(.20)MIN.
SOT-23