P4SMA HV SERIES Taiwan Semiconductor CREAT BY ART Suface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from 0 volt to BV min - Typical IR less than 1A above 10V - Moisture sensitivity level: level 1, per J-STD-020 - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition DO-214AC (SMA) MECHANICAL DATA Case: DO-214AC (SMA) Molding compound, UL flammability classification rating 94V-0 Base P/N with suffix "G" on packing code - halogen-free Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test Polarity: Indicated by cathode band Weight: 0.06 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25 unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak Power Dissipation at TA=25, Tp=1ms (Note 1) PPK 400 Watts Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 40 A Maximum Instantaneous Forward Voltage at 25 A for Unidirectional Only VF 5 Volts Operating junction temperature range TJ - 55 to +150 O C - 55 to +150 O C TSTG Storage temperature range Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 Per Fig. 2 ORDERING INFORMATION PART NO. PACKING CODE P4SMAxxxx (Note 1) GREEN COMPOUND CODE PACKAGE PACKING SMA 1,800 / 7" Plastic reel SMA 7,500 / 13" Paper reel SMA 7,500 / 13" Plastic reel R3 R2 Suffix "G" M2 Note 1: "xxxx" defines voltage from 220V (P4SMA220) to 400V (P4SMA400A) EXAMPLE PREFERRED P/N PART NO. PACKING CODE P4SMA400A R3 P4SMA400A R3 P4SMA400A R3G P4SMA400A R3 Document Number: DS_D1401014 GREEN COMPOUND CODE DESCRIPTION G Green compound Version: D14 P4SMA HV SERIES Taiwan Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA=25 unless otherwise noted) FIG. 1 PEAK PULSE POWER RATING CURVE FIG.2 PULSE DERATING CURVE 125 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 PEAK PULSE POWER(PPP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) PPPM, PEAK PULSE POWER, KW 100 10 1 0.1 0.1 1 10 100 1000 100 75 50 25 0 0 10000 PEAK PULSE CURRENT (%) PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM 120 Peak Value IPPM 100 Half Value-IPPM/2 10/1000 sec, WAVEFORM as DEFINED by R.E.A. 80 60 40 20 td 0 0 0.5 1 1.5 2 2.5 3 3.5 4 t, TIME ms IFSM, PEAK FORWARD SURGE CURRENT (A) FIG. 3 CLAMPING POWER PULSE WAVEFORM tr=10 sec 50 75 100 125 150 TA, AMBIENT TEMPERATURE tp, PULSE WIDTH, (S) 140 25 175 200 (oC) FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 50 8.3ms Single Half Sine Wave JEDEC Method 40 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz FIG. 5 TYPICAL JUNCTION CAPACITANCE CJ, JUNCTION CAPACITANCE (pF) A 100000 10000 VR=0 1000 100 f=1.0MHz Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE,Vwm 10 1 10 100 V(BR), BREAKDOWN VOLTAGE (V) Document Number: DS_D1401014 Version: D14 P4SMA HV SERIES Taiwan Semiconductor Device Device Marking Code Breakdown Voltage Test Stand-Off VBR (V) Current Voltage (Note 1) IT VWM @ VWM Current IPPM @ IPPM Coefficient Maximum Maximum Maximum Maximum Reverse Leakage Peak Pulse Clamping Voltage Temperature Min Max (mA) (V) ID (A) (A) (Note 2) Vc (V) of VBR (%/) P4SMA220A SEJ 209 231 1 185 1 1.3 328 0.108 P4SMA250A SGJ 237 263 1 214 1 1.2 344 0.108 P4SMA300A SKJ 285 315 1 256 1 1.0 414 0.108 P4SMA350A SMJ 332 368 1 300 1 0.9 482 0.108 P4SMA400A SPJ 380 420 1 342 1 0.8 548 0.108 Notes: 1. VBR measure after IT applied for 300 s, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2. 3. All terms and symbols are consistent with ANSI/IEEE C62.35. Document Number: DS_D1401014 Version: D14 P4SMA HV SERIES Taiwan Semiconductor PACKAGE OUTLINE DIMENSIONS DIM. Unit (mm) Unit (inch) Min Max Min Max A 1.27 1.58 0.050 0.062 B 4.06 4.60 0.160 0.181 C 2.29 2.83 0.090 0.111 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.056 F 4.95 5.33 0.195 0.210 G 0.00 0.20 0.000 0.008 H 0.15 0.31 0.006 0.012 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.68 0.066 B 1.52 0.060 C 3.93 0.155 D 2.41 0.095 E 5.45 0.215 MARKING DIAGRAM Document Number: DS_D1401014 P/N = Device Marking Code G= Green Compound YW = Date Code F= Factory Code Version: D14 P4SMA HV SERIES Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied,to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or seling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1401014 Version: D14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Taiwan Semiconductor: P4SMA220A P4SMA220A R2 P4SMA220A R3 P4SMA250A R2 P4SMA250A R3 P4SMA300A R2 P4SMA300A R3 P4SMA350A R2 P4SMA350A R3 P4SMA400A R2 P4SMA400A R3