N3793-5503RB - 3M - Datasheet.Live

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Four-Wall Header

.100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series

• Military (with 3M’s 3518 & N3518 polarizing key) and

centerbump polarization

• Optional ejector latches

• Mounting holes for securing header to board

• Optional polarizing posts available

• High temperature insulator option suitable for “no lead”

soldering operations

• High temperature option suitable for reﬂ ow soldering

using “paste in hole” techniques

• Solder tail option

• See the Regulatory Information Appendix (RIA) in the

“RoHS compliance” section of www.3Mconnector.com

for compliance information

Date Modiﬁ ed: April 4, 2011 TS-0772-M

Sheet 1 of 4

Physical

Insulator:

Material: Glass Filled Polyester (PBT)

Glass Filled Polyester (PCT) - (High Temp Option)

Flammability: UL 94V-0

Color: Gray (PBT), Black (PCT)

Contact:

Material: Copper Alloy

Plating:

Underplating: 100 µ” [2.54 µm] Nickel - Overall

Wiping Area: 30 µ” [ 0.76 μm ] Gold

Solder Tails: Tin Lead or Matte Tin (See Ordering Information)

Marking: 3M Logo, Part Identi cation Number and Orientation Triangle

Electrical

Current Rating: 5.00 A, 1 Contact Powered

3.00 A, 6 Contacts Powered

1.75 A, All Contacts Powered

Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise,

20% derated. Reference appropriate 3M Product Speci cation for detailed current

derating curves.

Insulation Resistance: >1 × 109 Ω at 500 VDC

Withstanding Voltage: 1,000 VRMS at Sea Level

Environmental

Temperature Rating: -55°C to +105°C

Process Rating: High Temp PCT insulator version: 260°C, per J-STD-020C, single pass

PBT insulator version: 191°C, maximum insulator temperature, solder wave

process only

Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only

UL File No.: E68080

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Four-Wall Header

.100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series

TS-0772-M

Sheet 2 of 4

.424 ± .010

[ 10.77 ]

.573 ± .010

[ 14.55 ]

.08

[2.0]

.97 Ref

[24.6]

.08

[2.0]

.37 Ref

[9.4]

.46 Ref

[11.7]

1.07 Ref

[27.2]

F Typ

Section A-A

(Straight)

Dim. E

.30

[7.6]

.24

[6.1]

.025 ± .002 Sq Typ

[ 0.64 ]

“Y”

.100

2.54 REF.

.25

6.4

.34

8.6

.28

7.1

.100

2.54 REF.

POSITION #1

.020

0.51

.13

3.3

2X O .100 [2.54]

SEE NOTE #2

.025 ± .002 Sq Typ

[ 0.64 ]

.24

[6.1]

.30

[7.6]

F Typ

.049 Ref

[1.24]

.100 Ref

[2.54]

Section B-B

(Right Angle)

“Y”

Dim. E

Position 1

Orientation

Triangle

.21

[5.3]

2X ø .100

[2.54]

(See Note 2) A

.16

[4.1]

Notch C

(See Table 1 & Note 1)

Notch B

(See Table 1)

Notch A

(See Table 1 & Note1)

.68

[17.3]

.35

[8.9]

.020

[0.51]

.197

[5.00]

.20

[5.1]

.12

[3.0]

-X0XX

Header without Latch Ejector

-X2XX

Header with

Short Ejector/Latch

for 3M Sockets without

Strain Relief

-X3XX

Header with

Long Ejector/Latch

for 3M Sockets with

Strain Relief

.68

[17.3]

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Four-Wall Header

.100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series

TS-0772-M

Sheet 3 of 4

Table 1

Pin Qty 3M Part

Number

Dimensions Polarizing

Notches

A B C D

06 3869 1.065 (27.05) 0.905 (22.99) 0.665 (16.89) 0.505 (12.83) B*

08 3889 1.165 (29.59) 1.005 (25.53) 0.765 (19.43) 0.605 (15.37) B*

10 3793 1.265 (32.13) 1.105 (28.04) 0.865 (21.97) 0.705 (17.91) BC

14 3314 1.465 (37.21) 1.305 (33.12) 1.065 (27.05) 0.905 (22.99) BC

16 3408 1.565 (39.75) 1.405 (35.66) 1.165 (29.59) 1.005 (25.53) ABC

20 3428 1.765 (44.83) 1.605 (40.74) 1.365 (34.67) 1.205 (30.61) ABC

24 3627 1.965 (49.91) 1.805 (45.82) 1.565 (39.75) 1.405 (35.69) ABC

26 3429 2.065 (52.45) 1.905 (48.36) 1.665 (42.29) 1.505 (38.23) ABC

30 3440 2.265 (57.53) 2.105 (53.44) 1.865 (47.37) 1.705 (43.31) ABC

34 3431 2.465 (62.61) 2.305 (58.52) 2.065 (52.45) 1.905 (48.39) ABC

40 3432 2.765 (70.23) 2.605 (66.14) 2.365 (60.07) 2.205 (56.01) ABC

50 3433 3.265 (82.93) 3.105 (78.84) 2.865 (72.77) 2.705 (68.71) ABC

60 3372 3.765 (95.63) 3.605 (91.54) 3.365 (85.47) 3.205 (81.41) ABC

64 3764 3.965 (100.71) 3.805 (96.62) 3.565 (90.55) 3.405 (86.49) ABC

* Available without center notch B. Contact 3M.

Ordering Information

Inch

(mm)

± .005

± .1 ± .01

Tolerance Unless Noted

.0 .00 .000

Inch

[ ] Dimensions for

Reference only

Table 2

3M Part

Number Sufﬁx Contact Tail Dim E Pin Cross Section Dim G

-5XX2 Solder Tail for

.062 (1.57)

Thick PC Board

.112 ± .010

(2.84)

Dim F

.0245 ± .0005

(0.622)

Diagonals

.028 ± .001

(0.71)

Corner Radii

.0075 Ref

(0.191)

0.035 ± .003

(0.89) (See Note 3)

-6XX2

-5X03 Solder Tail for 0.94

(2.39) to .125 (3.18)

Thick PC Board

.155 ± .010

(3.94)

.0245 ± .0005

(0.622)

.028 ± .001

(0.71)

.0075 Ref

(0.191) 0.035 ± .003 (0.89)

-6X03

Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).

2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M

Part # 3341-6) with .106 [2.69] dia mounting hole may be used.

3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ± .002. See page 4 for kink position details (K2 version).

4. Contact your 3M sales representative for custom requirements.

ø.106

[2.69]

or ø.116

[2.95]

(See Note 2)

Position 1

.100 ± .003

[2.54]

.100 ± .003

[2.54]

.060

[1.52]

.300

[7.62]

Side to Side Stackability

Recommended Mounting Hole Pattern

(Straight)

.352

[8.94]

“Y”

Dim G

"Y"

.41

[10.4]

Max to Edge of PCB

for Daisy Chain

ø.106

[2.69]

or ø.116

[2.95]

(See Note 2)

.029

[0.74]

.100 ± .003

[2.54]

Position 1

.232

[5.89]

Recommended Mounting Hole Pattern

(Right Angle)

.100 ± .003

[2.54]

Dim G

Plating

RB = 30 μ” [ 0.76 μm ] Gold and 200 μ” [ 5.08 μm ] Matte Tin

(App. E1 & C1 Apply)

Blank or UB = 30 μ” (0.76 μm ] Gold and 200 μ” [ 5.08 μm ]

Tin Lead (App. E3 & C2 Apply)

Tail

02 = for .062 [1.57] thick board

03 = for .094 to .125 [2.39 to 3.18] thick board

K2 = kinked for .062 [1.57] thick board

N = High Temp Black (PCT)/(RB Plating Req’d)

Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)

3M Part Number

(See Table 1)

Pin Conﬁguration

5 = Right Angle Solder Tails

6 = Straight Solder Tails

Latch/Ejector System

0 = No Latch/Ejector installed

2 = Short Roll Pin Latch/Ejectors

3 = Long Roll Pin Latch/Ejectors

5 = Short, Snap-In Latch/Ejectors

6 = Long, Snap-In Latch/Ejectors

X3XXX-XXXXXX

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Four-Wall Header

.100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series

TS-0772-M

Sheet 4 of 4

Part Customization

This spec sheet details our standard offering.

3M has several capabilities that can provide a part tailored

to your specic needs. Ask your 3M sales representative

or customer service for more details.

Both snap in and roll pin latches may be ordered sepa-

rately. Snap in and roll style latches are dimensionally and

functionally equivalent. If ordering snap-in or roll pin style

latches separately, please use the below chart.

Short

Latch

Long

Latch

Style

Color

Standard Temperature

(PBT)

3505-2 3505-3 Roll Pin Gray

High Temperature

(PCT)

N3505-2B N3505-3B Roll Pin Black

High Temperature (PBT) 3505-30 3505-31 Snap-In Gray

High Temperature (PPA) N3505-30B N3505-31B Snap-In Black

• Selective pin removal (ATA or other compatability)

• Wire wrap tails styles

Mounting Hardware

.31

[7.9]

.50

[12.7]

3341-5

(Installed from bottom of board)

3341-6

(Must be inserted prior to latch on

vertical headers)

Panhead Thread Cutting Screw:

#4-24 X 5/16”

Type: USA Std BT, Federal BG

Hex Head Bolt, Nut and Washer

Bolt - #2-56 X 1/2”

3341-5 & 6

Material - Stainless Steel

Polarizing Post

.318

[8.08]

.100 Dia

[2.54]

Note: Insert Post into one mounting hardware hole on bottom of header. Set

post to protrude .115” [2.92].

3201-4 LCP Black

3201-5 PBT Gray

2500 & 3000 Series Shrouded Header

Total Number

of Pins

Number of

Tails Kinked Positions Kinked

10 4 3 4 7 8

14 4 3 4 11 12

16 4 3 4 13 14

20 4 3 4 17 18

24 4 3 4 21 22

26 4 3 4 23 24

30 4 5 6 25 26

34 4 7 8 27 28

36 4 7 8 27 28

40 4 7 8 33 34

50 4 7 8 43 44

60 4 11 12 49 50

64 4 11 12 53 54

Kinked Tail Detail:

Kink is located .05” below bottom surface of plastic.

External radius of kink toward part centerline.

Polarizing Keys

Dim A

N3518 LCP Black .02

3518 PBT Gray .02

.15

[3.8]

.09

[2.3]

Breakaway Tab .34 Ref

[8.6]

Note: #2216 B/A Scotchweld can be used to adhere keys.